-
DTA Flat Out Levelling System Tile Clips 1.5mmVendor:
Eliminate lippage and keep tiles level with DTA Flat Out 1.5mm Tile Clips. Suitable for wall and floor tiles 2–12mm thick.- From $27.50
- From $27.50
- Unit price
- per
-
DTA Silicone Remover ToolVendor:
Use the DTA Silicone Remover Tool for precision mechanical stripping of cured silicone, acrylic, and adhesives. Its dual-action right-angle blade and ergonomic grip ensure efficient, damage-free surface preparation on hard substrates.
- From $25.16
- From $25.16
- Unit price
- per
-
Duram 195Vendor:
Use Duram 195 as a Class III elastomeric waterproofing membrane for non-exposed areas, providing 400% elongation and Green Star compliant low VOCs. It requires a dry substrate and must be covered or top-coated with Multithane ATC for UV exposure.- $319.58
- $319.58
- Unit price
- per
-
Duram AzcosealVendor:
Use Duram Azcoseal as a clear penetrative sealer for porous surfaces or as a robust primer to enhance adhesion of Duram waterproofing membranes. It's touch dry in 1-2 hours, UV resistant, and uses cross-linking technology for a strong system bond.
- $239.02
- $239.02
- Unit price
- per
-
Duram Azcothane ReoVendor:
Use Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.
- $167.05
- $167.05
- Unit price
- per
-
Duram S900Vendor:
Use Duram S900 for invisible, sub-surface weatherproofing of porous mineral substrates like concrete and sandstone. Its siloxane chemistry allows vapour diffusion while preventing water ingress and efflorescence, curing fully in 12-24 hours.
- $254.95
- $254.95
- Unit price
- per
-
Efflock Hydrophobic AdditiveVendor:EfflockUse Efflock Hydrophobic Additive to stop efflorescence and damp in cement-based materials like screeds, mortars, and concrete. This VOC-free, concentrated additive provides bulk hydrophobic protection throughout the material, reducing water absorption and often negating the need for a costly secondary membrane.
- From $102.17
- From $102.17
- Unit price
- per
-
Everbond 2P CrosslinkerVendor:
Use Everbond 2P Crosslinker to upgrade Everbond 2P Contact Adhesive for high heat, strength, and water resistance, achieving bonds over 120°C and preventing premature failure.- $22.00
- $22.00
- Unit price
- per
-
Everbond Brush Contact AdhesiveVendor:
Use Everbond Brush Contact for high-strength, fast-drying bonds on laminates, timber, and upholstery, providing reliable heat and water resistance with a 3-5 minute touch-dry time.
- From $81.85
- From $81.85
- Unit price
- per
-
Everbond General Purpose PVAVendor:
Use Everbond General Purpose PVA for reliable timber bonding in joinery and cabinetry. It provides strong, non-staining adhesion with options for accelerated thermo-curing, ensuring efficient and high-quality results on timber, veneers, and laminates.
- From $60.48
- From $60.48
- Unit price
- per
-
Everbond Melamine PVA AdhesiveVendor:
Use Everbond Melamine PVA Adhesive for reliable, clear bonding of melamine faced board in cabinet and furniture construction. Its specific adhesion to melamine ensures strong, consistent joints that dry clear, avoiding bond failures common with general purpose glues.
- From $105.18
- From $105.18
- Unit price
- per
-
Everbond Plastabond PVAVendor:
Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.
- From $70.46
- From $70.46
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
Use Everbond PVA Xlink 3 for water-resistant timber bonding in cabinetry, joinery, and laminating. Certified to AS 2754.2 and EN204, this self-crosslinking adhesive provides high strength and can accelerate production with hot pressing.
- From $72.58
- From $72.58
- Unit price
- per
-
Everbond Spray Contact SP-230Vendor:
Use Everbond SP-230 for high-strength, heat-resistant contact bonding across a broad range of substrates like laminates, foams, and fabrics. Its fast 3-5 minute dry time speeds up fabrication, providing reliable performance where heat and moisture resistance are critical.
- From $183.65
- From $183.65
- Unit price
- per
-
Everbond Styrobond STVendor:
Use Styrobond ST for bonding sheet materials to expanded polystyrene foam without solvent attack. Its specialised formulation prevents foam degradation, offers 2.5 m² per litre spray coverage, and requires a minimum 700 Kg/m² pressure for strong bonds.
- $279.60
- $279.60
- Unit price
- per
-
Everbond Ultra Clear Brush ContactVendor:
Use Everbond Ultra Clear Brush Contact Adhesive for fast, strong bonds on diverse substrates where invisible glue lines are critical. It offers a 3-5 minute dry time and high initial strength, making it ideal for upholstery and lamination where aesthetics and speed matter.
- $298.28
- $298.28
- Unit price
- per
-
Everflex Aqua-Ban Elastomeric Waterproof MembraneVendor:
Use Everflex Aqua-Ban for NCC compliant under-tile waterproofing in wet areas and balconies. This Class III elastomeric membrane offers 391% elongation and rapid drying for confident, compliant installations ready for tiling in 48 hours.
- $140.53
- $140.53
- Unit price
- per
-
Everflex Fire-Fill Acrylic SealantVendor:
Use Everflex Fire-Fill for fire-rated sealing of penetrations and expansion joints, offering up to 4 hours of fire resistance per AS1530.4 and AS4072.1, with ±20% joint movement.
- From $10.93
- From $10.93
- Unit price
- per
-
Everflex HVUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant Class 3 waterproofing on UV-exposed external and internal wet areas. This single-component, elastomeric membrane is tested to AS4858 and AS4654.1, remaining flexible and non-re-emulsifying even under full immersion after curing.
- $177.02
$0.00- $177.02
- Unit price
- per
-
Everflex JS Hybrid Acrylic SealantVendor:
Use Everflex JS for high-performance joint sealing in exterior and interior applications. It accommodates +/- 50% movement, offers superior adhesion without priming for most substrates, and resists weathering and UV without cracking.
- From $9.45
$0.00- From $9.45
- Unit price
- per
-
Everflex Multi-Prime Acrylic PrimerVendor:
Use Everflex Multi-Prime for preparing both porous and non-porous substrates before applying waterproofing membranes, tile adhesives, or levelling compounds. It offers rapid 1-hour drying and system compatibility, reducing callbacks and speeding up project timelines.
- From $71.69
- From $71.69
- Unit price
- per
-
Everflex Polyurethane SupaprimeVendor:
Use Everflex Supaprime to ensure robust adhesion for Adheseal sealants and membranes on porous substrates like concrete and timber. Its rapid cure and deep penetration prevent costly delamination, providing a reliable bond for critical applications.
- $59.51
- $59.51
- Unit price
- per
-
Everflex Primer WBPVendor:
Use Primer WBP for preparing porous concrete and screeds for Adheseal water-based membranes. It beds down dust and ensures strong adhesion, meeting Green Star criteria with very low VOCs.
- From $48.26
- From $48.26
- Unit price
- per
-
Everflex PU240 Polyurethane Adhesive and SealantVendor:
Use Adheseal PU-240 for high-strength, flexible sealing and bonding in demanding construction and marine applications. With +/- 25% movement capability and 35 Shore A hardness, it ensures a durable, waterproof, and abrasion-resistant joint.
- From $11.74
- From $11.74
- Unit price
- per
-
Everflex VBS Water-based Epoxy PrimerVendor:
Use Everflex VBS as a 2-part water-based epoxy primer and negative pressure vapour barrier for damp or green concrete. It withstands up to 25m (250 kPa) hydrostatic pressure and allows overcoating in 4-24 hours, preventing moisture-related system failures and accelerating project timelines.
- $440.44
- $440.44
- Unit price
- per
-
Everflex WPM Elastomeric Waterproof MembraneVendor:
Use Everflex WPM for under-tile waterproofing of wet areas and balconies, meeting AS4858 Class III and AS4654.1 standards. Its rapid drying and no re-emulsification formula ensures reliable, compliant results before tiling.
- $176.09
- $176.09
- Unit price
- per
-
Everflex WPUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant, UV-exposed waterproofing on roofs, balconies, and wet areas. Its Class 3 elastomeric formulation withstands maintenance foot traffic and will not re-emulsify, ensuring long-term performance.
- $177.01
- $177.01
- Unit price
- per
-
EverKrete 102Vendor:EverKreteUse EverKrete 102 as a flexible thermoset vinyl polymer binder for robust concrete mortars and slip-resistant overlays, offering fast cure and reliable priming for concrete from -18°C to +15°C.
- From $213.97
- From $213.97
- Unit price
- per
-
EverKrete AcceleratorVendor:EverKreteEverKrete Accelerator speeds up the curing of EverKrete 102 resin, ideal for cold conditions and fast project turnaround.
- $37.50
- $37.50
- Unit price
- per
-
EverKrete Concrete Repair System Trade KitVendor:EverKreteUse EverKrete Concrete Repair System Trade Kit for rapid, high-strength concrete repairs. It achieves full traffic in 45-90 minutes at 25°C and offers over 70 MPa compressive strength, significantly reducing site downtime.
- $283.33
- $283.33
- Unit price
- per
-
EverKrete PrimerVendor:EverKreteUse EverKrete Primer for critical concrete and steel preparation where a strong bond, vapour barrier, and outgassing control are essential. This single-component, fast-drying primer ensures optimal adhesion for EverKrete repair mortars and protects against corrosion and moisture.
- From $30.65
- From $30.65
- Unit price
- per
-
Fatra PVC Coated AngleVendor:FatraThe Fatranyl PVC coated termination angles come in various different dimensions depending on the purpose and application of the Fatra PVC membrane system. Fatranyl PVC coated angles can alos be fabricated to any site specific dimensions upon request.
- From $351.90
- From $351.90
- Unit price
- per
-
Fatrabond 1214 Roller Applied Polyurethane Adhesive 20LVendor:FatraUse Fatrabond 1214 for roller-applied bonding of Fatrafol felt-backed roof membranes, delivering rapid hardening and preventing blistering with its solvent-free MCPU formulation.
- $936.00
- $936.00
- Unit price
- per
-
Fatrafol 804 Unreinforced Waterproofing MembraneVendor:FatraFatrafol 804 is a UV-resistant, unreinforced PVC waterproofing membrane designed for detailed finishing and joining within Fatrafol reinforced roofing systems. It's ideal for use on roofs and must be installed by trained professionals.
- From $960.00
- From $960.00
- Unit price
- per
-
Fatrafol 807v Reinforced Waterproofing MembraneVendor:FatraUse Fatrafol 807v for adhered roofing systems where its 120 g/m² non-woven PES-textile backing ensures a secure bond. It provides reliable, UV-resistant waterproofing for long-term performance.
- From $1,674.64
- From $1,674.64
- Unit price
- per
-
Fatrafol 810v Reinforced PVC Roofing MembraneVendor:FatraFatrafol 810v is a high-quality, reinforced PVC roofing membrane designed for single-ply flat roofing applications. It's UV resistant, mechanically anchored, and suitable for a wide range of projects.
- From $1,504.00
- From $1,504.00
- Unit price
- per
-
Fibreglass Reinforcing Mat 225gsmVendor:
Use Fibreglass Reinforcing Mat 225gsm for reinforcing corners and joints in waterproofing applications. Its 225gsm weight provides balanced strength and flexibility to prevent cracking and water intrusion at critical stress points.
- From $39.75
- From $39.75
- Unit price
- per
-
Floor / Wall Scraper 125mmVendor:B.A.TUse the 125mm Floor / Wall Scraper for rapid removal of old adhesives and paint. Its high-carbon steel blade and 500mm handle provide leverage for efficient surface preparation.
- $38.08
- $38.08
- Unit price
- per
-
GCP Epocote F100W Clear Epoxy PrimerVendor:
GCP Epocote F100W is a clear, two-pack, water-based epoxy primer and sealer. Designed for priming damp or green concrete, it offers an exceptionally long pot-life and fast cure, ensuring a tough, chemically resistant bond for professional waterproofing membrane systems.- From $445.10
- From $445.10
- Unit price
- per
-
General Purpose Masking TapeVendor:KwikmaskUse Kwikmask General Purpose Masking Tape for clean paint lines and temporary holding on cured painted surfaces. Its pressure-sensitive adhesive ensures reliable bonding and residue-free removal, preventing rework.
- From $4.33
- From $4.33
- Unit price
- per
-
General Purpose Polyester Paint BrushVendor:Adheseal ToolsUse this polyester paint brush for consistent application across general painting, staining, and varnishing projects. Its shed-resistant filaments deliver smooth finishes without brush marks.
- From $6.26
- From $6.26
- Unit price
- per
-
Glaziers SpatulaVendor:Adheseal ToolsUse the Glaziers Spatula for precise application and smoothing of sealants and putties during glass installation, featuring multiple corner configurations and a clear finish for accuracy.
- $11.50
- $11.50
- Unit price
- per
-
Glaziers SpatulaVendor:Adheseal ToolsQuality silicone scraper for applicators for typical trade applications. Commonly used for removing excess silicone and sealants in glazier applications.
- From $9.95
- From $9.95
- Unit price
- per
-
Great Aussie Tradie Cleanup WipesVendor:Great Aussie WipesUse Great Aussie Tradie Cleanup Wipes for industrial-strength removal of bitumen, sealants, and grease. They are 100% plastic-free, compostable, and feature a non-scratch formula to prevent surface damage.
- From $25.00
- From $25.00
- Unit price
- per
-
Gripset 11Y AdmixtureVendor:
Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.- From $99.49
- From $99.49
- Unit price
- per
-
Gripset 2P Class II MembraneVendor:
Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.
- $188.44
- $188.44
- Unit price
- per
-
Gripset 38FC MembraneVendor:
Use Gripset 38FC for rapid waterproofing of internal and external wet areas and roofs. It allows tiling in 4 hours and flood testing in 24 hours, supported by AS 4858 and AS 4654.1 compliance and >300% elongation.
- From $93.63
- From $93.63
- Unit price
- per
-
Gripset 51 MembraneVendor:
Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.
- From $71.51
- From $71.51
- Unit price
- per
-
Gripset B09 Bituminous Surface TreatmentVendor:
Use Gripset B09 to rejuvenate oxidised asphalt and re-surface pitted layers, providing a non-slip, durable coating. Its unique polymer technology and cement cross-linking property deliver fast drying and extended asset life.
- $191.42
- $191.42
- Unit price
- per
-
Gripset B26 Asphalt Crack FillerVendor:
Use GRIPSET B26 for cold-applied asphalt and bitumen crack sealing. Its fast-drying, flexible formulation allows traffic in 15 minutes, avoiding the need for heating equipment and resisting sulphates.
- $187.64
- $187.64
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Products
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.