Products

GCP Epocote F100W is a clear, two-pack, water-based epoxy primer and sealer. Designed for priming damp or green concrete, it offers an exceptionally long pot-life and fast cure, ensuring a tough, chemically resistant bond for professional waterproofing membrane systems.

Use Kwikmask General Purpose Masking Tape for clean paint lines and temporary holding on cured painted surfaces. Its pressure-sensitive adhesive ensures reliable bonding and residue-free removal, preventing rework.

Use this polyester paint brush for consistent application across general painting, staining, and varnishing projects. Its shed-resistant filaments deliver smooth finishes without brush marks.

Use the Glaziers Spatula for precise application and smoothing of sealants and putties during glass installation, featuring multiple corner configurations and a clear finish for accuracy.

Quality silicone scraper for applicators for typical trade applications. Commonly used for removing excess silicone and sealants in glazier applications.

Quality silicone scraper for applicators for typical trade applications. Commonly used for removing excess silicone and sealants in glazier applications.

Use Great Aussie Tradie Cleanup Wipes for industrial-strength removal of bitumen, sealants, and grease. They are 100% plastic-free, compostable, and feature a non-scratch formula to prevent surface damage.

Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.

Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.

Use Gripset 38FC for rapid waterproofing of internal and external wet areas and roofs. It allows tiling in 4 hours and flood testing in 24 hours, supported by AS 4858 and AS 4654.1 compliance and >300% elongation.

Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.

Use Gripset B09 to rejuvenate oxidised asphalt and re-surface pitted layers, providing a non-slip, durable coating. Its unique polymer technology and cement cross-linking property deliver fast drying and extended asset life.

Use GRIPSET B26 for cold-applied asphalt and bitumen crack sealing. Its fast-drying, flexible formulation allows traffic in 15 minutes, avoiding the need for heating equipment and resisting sulphates.

Use Gripset BRW HD for instant, flexible subterranean and wet area waterproofing. Its self-adhesive butyl rubber and HDPE construction eliminates curing delays, resists extreme temperatures from -30°C to 80°C, and stands up to ground salts.

Use Gripset BRW PF Squares for instant, primer-less sealing of penetrations and joint intersections, allowing immediate overcoating with membranes and finishes. Its 0.8mm butyl rubber provides a flexible, high-adhesion detail that prevents moisture ingress in critical areas, operating from -40°C to 100°C.

Use Gripset BRW PF Tape for instant, self-adhesive sealing of junctions, penetrations, and flashings, offering immediate overcoating and eliminating drying time compared to liquid options.

Use Gripset BRW PFN for compliant internal and external floor waterproofing, including anti-fracture over cracked substrates. This self-adhesive butyl rubber sheet delivers >60% elongation and performs from -30°C to 80°C, passing AS 4858 and AS 4654.1.

Use Gripset C-1P for demanding waterproofing jobs, resisting up to 5 bar positive and 1.5 bar negative hydrostatic pressure. This flexible, fibre-reinforced cementitious membrane bridges cracks up to 0.75 mm and holds AS 40200 potable water approval.

Use Gripset C-Bed for stable, shrinkage-compensated tile beds that are trafficable in 24 hours. Its polymer-modified formulation reduces efflorescence and bonds reliably to primed substrates and membranes.

Use Gripset C-Lite for critical tiling jobs that demand durability and flexibility, such as immersed areas, large format tiles, and underfloor heating. Its C2TES2 classification ensures high bond strength and deformability in challenging conditions.

Use Gripset C-Mastic for high-performance tiling applications, delivering C2S1TE classified bond strength, non-slump characteristics for large format tiles, and a respirable silica-free formulation.

Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.

Use Gripset C-Rubber for demanding internal and external tiling jobs, including wet areas, where C2TES1 performance is required. Its flexible, non-slump formulation and respirable silica free composition provide a reliable and safer installation.

Use Gripset E-60 as a two-component epoxy primer and moisture barrier for concrete and masonry. It withstands up to 2.5 bar hydrostatic pressure, applies to damp and green concrete, and is AS 4020 compliant for potable water.

Elastoproof B50 is a high-performance joint band for waterproofing detail work at junctions, corners, control and expansion joints. The central “Flexible Zone” accommodates movement in multiple directions with up to 100% elastic recovery, while the fleece edges embed into a wet liquid membrane to create a seamless, durable seal. Designed for trade use in commercial, industrial, and residential wet areas.

Pre-formed, stretchable waterproofing collars for sealing around pipe and service penetrations. Made from Gripset’s Elastoproof fabric with a central elastomeric zone, ensuring a watertight, flexible seal that integrates with liquid membranes. Available in multiple sizes for various pipe diameters.

Use Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.

Use Gripset GP Primer for enhancing adhesion of Gripset membranes and tile adhesives on porous substrates. It dries in 30 minutes, covers 8-10m² per litre, and is crucial for preventing callbacks due to poor bonding.

Use Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.

Use Gripset OP Primer for reliable adhesion on challenging non-porous surfaces like metal, existing tiles, and PVC. This solvent-free, low VOC primer delivers a textured finish and dries in 30 minutes, ensuring a strong bond for Gripset membranes and tile adhesives.

Use Gripset P39 for compliant waterproofing in permanently wet areas, exposed roofs, and under tile. Its hybrid polyurethane formula ensures >300% Class III flexibility and will not re-emulsify, meeting AS 4858 and AS 4654.1 standards.

Use Gripset Xpress Multi Pro for waterproofing roofs, balconies, and wet areas where fast project turnaround is critical. It's rain-resistant in 3 hours, withstands ponding water, and remains highly flexible for lasting protection.

Use Gripset Xpress Primer H2O Plus for fast-drying vapour barrier priming on damp or green concrete and mineral surfaces, ready for overcoating in 1 hour. Its colour change indicator confirms readiness, preventing blistering and efflorescence.

Use Gripset Xpress SP to prime challenging non-porous and porous substrates, ensuring strong adhesion without etching and drying in 30 minutes for faster job completion.

Use Gripset XpressLay for rapid internal wet area waterproofing and anti-fracture protection. It allows immediate tiling and meets AS 4858, eliminating cure time delays on site.

Use FulasealPRO 840NS for permanently plastic, non-skinning seals in static, low-temperature environments like cool rooms. It offers moisture resistance and performs from -40°C to +50°C.

Handyman Cartridge Caulking Gun Type 20 is a metal-framed manual applicator optimized for light-duty sealant and adhesive tasks in residential maintenance. The steel frame and handle provide a rigid cradle that prevents cartridge bypass under pressure, ensuring consistent bead delivery for interior trim and...

Use the Handyman Sausage Caulking Gun Type 1 for consistent, clean application of 600ml sausage pack sealants and adhesives, built with a durable plastic frame and aluminium-alloy handle for reliable daily use.

Use Heavy Duty Cartridge Caulking Gun Type 35 for precise application of 310ml sealant cartridges. Its aluminium alloy construction and 360-degree rotating cradle ensure consistent beads and durability on site.

The heavy-duty 100mm Deluxe Wall Scraper is designed for professional use in construction and renovation projects. Featuring a 1.2mm thick steel blade bent for extra leverage, it effectively removes old paint, wallpaper, and other materials from walls. The rubber contoured handle with a steel cap provides extra strength for tough jobs.

Use this 230mm heavy-duty roller frame for consistent paint application across large surfaces, ensuring reliable performance and easy extension pole attachment.

The Adheseal Plastic Bucket & Lid is a robust and versatile solution for the storage and transportation of various materials.

Husky Acribond Acrylic Foam Tape is a high-performance double-sided tape engineered for demanding bonding and mounting applications.

This cost-effective hog bristle brush with a wooden handle is perfect for demanding industrial and marine applications. Buy in bulk and save on various sizes

Use Rags for critical cleaning and polishing where lint and colour transfer are unacceptable. The premium white recycled cotton ensures a streak-free, colour-safe finish on delicate surfaces, preventing rework.

Use this 230mm industrial grade painter's tray for professional roller painting. Its recycled PP plastic construction resists cracking, snapping, and most harsh chemicals, ensuring durability and efficiency with its grooved ramp and corner spout.

Use the Injection Gun for precise, consistent delivery of epoxy and polyurethane resins into concrete cracks, ensuring reliable structural and waterproofing repairs by preventing inconsistent mix ratios and incomplete filling.

Use Injection Gun Nipple Coupler With Threaded Extension Pipe for: connecting compatible injection guns to crack injection fittings while providing additional reach and access during injection work. Injection Gun Nipple Coupler With Threaded Extension Pipe: A Product Overview The Injection Gun Nipple Coupler With...

250 mm replacement injection hose for the Adheseal Injection Gun (SKU INJGUN/RES). Designed to connect the gun to standard injection balloons for crack injection repairs — quick swap spare part for professional contractors.

Injection Packer Hammer In - Specifically designed for wider cracks, this hammer-in packer provides an efficient and reliable solution for crack injection applications.