-
Adheseal Unobond Polyurethane AdhesiveVendor:
Adheseal Unobond is a single-pack, solvent-free, moisture-curing D4 polyurethane adhesive for structural timber bonding, joinery, furniture and cabinet manufacture, exterior woodwork and wooden boat building. Its gel consistency makes this cartridge-applied polyurethane glue easy to control on close-fitting joints, while the cured bond is...- From $17.65
- From $17.65
- Unit price
- per
-
Adheseal High Power 609 Instant Grab AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or movement, High Power 609 Instant Grab Adhesive provides a 1-second immediate grab that reduces the need for temporary mechanical supports. This single-part MS hybrid polymer cures via atmospheric moisture, forming an elastic...
- From $15.70
- From $15.70
- Unit price
- per
-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably...
- From $11.03
- From $11.03
- Unit price
- per
-
Adheseal Autoshield ActivatorVendor:
For automotive and industrial glazing jobs where polyurethane adhesives must bond reliably to smooth, non-porous surfaces, Autoshield Activator AP1001 prepares the substrate to prevent adhesive failure. This clear wipe-on adhesion promoter chemically alters the surface energy of glass and lacquer to secure a strong...
- From $48.66
- From $48.66
- Unit price
- per
-
Adheseal Multi-Tack Acrylic SealantVendor:
For fixing wallboards, timber flooring, and interior mouldings where joint movement can cause squeaks or structural warping, Adheseal Multi-Tack Acrylic Sealant provides a high-strength, flexible bond. This water-based adhesive complies with AS:2753 for fixing plasterboard wallboards and AS:2329 for fixing other wallboards, ensuring compliant...
- From $3.83
$3.65- From $3.83
- Unit price
- per
-
Adheseal Primer 50AVendor:
For high-liability installations on non-porous substrates where maximum performance and longevity are required, Primer 50A is a fast-drying adhesion promoter. This clear alcohol solution is a single-pack, ready-to-use wipe that prepares difficult-to-bond surfaces for Polyurethane, MS, Silicone, and acrylic sealants and adhesives. How it...
- $53.03
- $53.03
- Unit price
- per
-
Everflex Polyurethane SupaprimeVendor:
Everflex Polyurethane Supaprime is a porous substrate primer for caulking, civil construction, and waterproofing. One litre covers 5 to 10 square metres depending on porosity, and its very low viscosity sinks deep into concrete, masonry, and timber to give sealants and membranes a stable,...
- $59.51
- $59.51
- Unit price
- per
-
Autoshield GB Autoglass PrimerVendor:
For pre-treating auto glass and vehicle body bond faces before applying Adheseal Autoshield 1-FC single-component polyurethane, Autoshield GB Autoglass Primer provides a secure bond link and critical UV blockout protection. This solvent-based black primer reacts with atmospheric moisture to form a thin, receptive layer...
- $56.25
- $56.25
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
For woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions...
- From $72.58
- From $72.58
- Unit price
- per
-
Everbond Spray Contact SP-230Vendor:
For laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces,...
- From $183.65
- From $183.65
- Unit price
- per
-
Everbond Brush Contact AdhesiveVendor:
For laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims...
- From $81.85
- From $81.85
- Unit price
- per
-
Everbond Ultra Clear Brush ContactVendor:
For automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for...
- $298.28
- $298.28
- Unit price
- per
-
Everbond Styrobond STVendor:
For bonding sheet metals, fibre cement sheet, plywood, and particle board to expanded polystyrene foam, Everbond Styrobond ST is a spray-grade contact adhesive formulated with specialised solvents that will not melt or degrade the polystyrene substrate. Its low viscosity allows application through conventional spray...
- $279.60
- $279.60
- Unit price
- per
-
Biyseal Bitumen Impregnated FoamVendor:
For sealing metal cladding, expansion joints, roof valleys, and building penetrations against weather, dust, and vermin, Biyseal Bitumen Impregnated Foam provides a compressible, pre-formed barrier that expands and contracts without losing its recovery properties. Impregnated with bitumen, this flexible polyurethane strip exerts continuous outward...
- From $134.19
- From $134.19
- Unit price
- per
-
Diggers AcetoneVendor:DiggersUse Diggers Acetone when you need a fast-evaporating solvent for cleaning PVC pipe before gluing, removing stubborn adhesives or cleaning fibreglass tools. It dries quickly, mixes completely with water and is intended for cleaning rather than surface coating or protection. Why this product exists...
- From $22.17
- From $22.17
- Unit price
- per
-
Adheseal IPA CleanerVendor:
For prep work prior to applying adhesives, sealants, or surface primers, Adheseal IPA Cleaner removes surface contaminants to ensure a clean substrate and a reliable bond. This 100% isopropyl alcohol cleaner removes fluxes, light oils, grime, and oxides, then evaporates within seconds without leaving...
- From $17.50
- From $17.50
- Unit price
- per
-
Methylated Spirits 95%Vendor:
For preparing substrates before adhesive or sealant application, removing wet adhesives, and cleaning tools, Adheseal Methylated Spirits 95% is a denatured alcohol formulated for use on non-porous surfaces. It functions as a rapid-evaporating solvent that leaves no residue, ensuring a clean surface for optimal...
- $146.73
- $146.73
- Unit price
- per
-
Megapoxy 108Vendor:
For civil engineering applications requiring rapid structural strength, Megapoxy 108 is a rapid-setting liquid epoxy binder formulated for splicing bridge piles and executing high-strength repairs to precast concrete. Its fast compressive and impact strength development allows pile driving operations to resume with minimal downtime,...- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 69Vendor:
For high-load structural joinery, marine assembly, and stone fabrication where components are subject to repeated high-impact forces, Megapoxy 69 provides a permanent bond with a non-sag, gel-type consistency. It secures metals, timber, granite, marble, and fibreglass on vertical and overhead surfaces without slumped joints...
- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy HVendor:
For structural concrete repairs, steel anchoring, and wet-to-dry concrete bonding, Megapoxy H is a low-viscosity, solvent-free hydrophilic epoxy resin that creates permanent bonds stronger than the concrete itself. It complies with AS/NZS 4020:2018 for potable water contact, making it suitable for drinking water structures,...
- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy HTVendor:
For wet-to-dry concrete bonding, structural repairs, and underwater or splashzone applications, Megapoxy HT is a hydrophilic epoxy gel adhesive that forms permanent bonds on concrete, metal, and steel surfaces. Its formulation is solvent-free, contains no volatile organic compounds (Nil V.O.C.), and resists hydrogen sulphide...
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy P1Vendor:
For high-strength structural bonding and concrete repair, Megapoxy P1 is a two-component gap-filling epoxy paste formulated for vertical, overhead, and damp-condition applications. It is chemically resistant to hydrogen sulphide in sewage systems and complies with AS/NZS 4020:2018 for contact with potable drinking water, making...
- From $84.10
- From $84.10
- Unit price
- per
-
Sikaflex Pro Polyurethane Sealant 600ml Sausages - BlackVendor:
For movement and connection joints in concrete and masonry facades, Sikaflex PRO is a one-component, moisture-curing polyurethane sealant. It provides a reliable seal for expansion joints on porous substrates and is suitable for both indoor and outdoor general sealing applications, including potable water systems...- From $16.48
- From $16.48
- Unit price
- per
-
Black
-
Dark Grey
-
Japan Beige
-
Off White
-
Sika Primer-3 N Epoxy PrimerVendor:
For sealing and bonding jobs on porous surfaces or metals, Sika Primer-3 N Epoxy Primer is the single-component, solvent-based primer required to prepare the substrate before applying Sikaflex, SikaHyflex, SikaBond, or Sikasil adhesives and sealants. Adhesion promotion mechanism The primer functions as an adhesion...
- From $71.45
$0.00- From $71.45
- Unit price
- per
-
Industrial Cleaning Rags 10kg - White T-ShirtVendor:Adheseal ToolsWiping rags in 10kg bags, the workshop staple. Pick the grade to suit the job: premium white cotton for glass, coatings, and finishing where lint and colour would show, or coloured and white t-shirt material for general cleanup, polishing, and maintenance.Recycled cotton with low...
- From $36.80
- From $36.80
- Unit price
- per
-
White T-Shirt
-
Coloured Mixed T-Shirt
-
White Cotton Shirt
-
Handyman Cartridge Caulking Gun Type 20Vendor:Adheseal ToolsA steel-framed manual cartridge gun for maintenance sealing: bathroom silicone, acrylic gaps, trim adhesive. The rigid cradle stops the cartridge sliding under pressure, so the bead stays even for the length of the tube.A step up from plastic guns for toolboxes that get used...
- $21.99
- $21.99
- Unit price
- per
-
Cordless Sausage Caulking Gun M8504Vendor:Adheseal ToolsA cordless sausage gun for the days the trigger hand gives out before the joints do. The high-thrust motor pushes stiff PU and hybrid sealants from 600ml packs at a steady rate, and the variable speed trigger sets the bead pace, not your grip...
- $343.20
- $343.20
- Unit price
- per
-
Acribond Acrylic Double Sided Foam Tape - Clear - ClearVendor:Husky TapeHusky Acribond A4000 Clear Acrylic Foam Tape is a clear high-bond double-sided acrylic foam tape for acrylic, glass, signage and display work where a visible grey foam bond line is not wanted. The current A4100C construction uses 1.0 mm clear acrylic foam with strong...
- $68.45
- $68.45
- Unit price
- per
-
Clear
-
Husky Tape Acribond Acrylic Foam Tape - Grey - GreyVendor:Husky TapeHusky Acribond A3000 Grey Acrylic Foam Tape is a high-bond double-sided acrylic foam tape for mounting and joining sheet metal, exterior cladding and composite panels, signage, automotive trim and other compatible assemblies. The current A3110G construction uses 1.1 mm grey acrylic foam with strong...
- $63.62
- $63.62
- Unit price
- per
-
Grey
Frequently Asked Questions
How do I choose an adhesive or sealant for marine work?
Start with the substrates, joint movement and exposure. Check the product technical data for marine use, water exposure and material compatibility. Use the specified primer or cleaner, and follow the stated application and cure limits.
Can I use one sealant on every boat surface?
No. Aluminium, glass, timber, plastics and coated surfaces can need different products. Confirm compatibility with each substrate and coating. Test a small area when the product technical data does not give a clear answer.
Do I need a primer before I bond or seal?
Use a primer only when the product technical data specifies one for the substrate and exposure. Clean and dry the surface first. Apply the primer at the stated rate and complete the work within its stated open time.
What should I use to clean the surface?
Use the cleaner that the adhesive or sealant manufacturer specifies. A strong solvent can damage plastics, paint and coatings. Remove loose dirt first, use clean lint-free material, and let the surface dry before application.
Can I apply these products below the waterline?
Only use a product below the waterline when its current technical data permits that exposure. Do not infer immersion resistance from a marine label. Check the substrate, cure conditions and required service time before launch.