Civil Construction Range

Use Bostik Seal 'N' Flex One Plus P590 for construction and expansion joints needing high movement capability. It offers +100% / -50% joint movement with bubble-free curing and AS/NZS 4020:2018 potable water certification.

Use Bostik Fireban One for fire-rated and acoustic sealing of construction joints. It offers up to 4 hours of fire resistance, 50% joint movement capability, and excellent durability, ensuring compliant and lasting performance.

Use Pasco Aquastop for waterproofing non-moving concrete construction joints and penetrations. It expands up to 300%, withstands over 70m hydrostatic head, and remains active and self-healing in potable water.

Use ARDEX RA 88 PLUS for high-performance epoxy bonding and non-moving repairs on concrete and other materials, offering 87 MPa compressive strength and AS/NZS4020 potable water compliance in a non-sag, trowelable format.

Use ARDEX RA 142 for structural concrete crack injection and bonding, specifically targeting hairline to 3mm cracks. Its 190 cps low viscosity ensures deep penetration, delivering 70 MPa compressive strength to restore integrity.

Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.

Use Gripset C-Bed for stable, shrinkage-compensated tile beds that are trafficable in 24 hours. Its polymer-modified formulation reduces efflorescence and bonds reliably to primed substrates and membranes.

Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.

Use Gripset GP Primer for enhancing adhesion of Gripset membranes and tile adhesives on porous substrates. It dries in 30 minutes, covers 8-10m² per litre, and is crucial for preventing callbacks due to poor bonding.

Use Gripset OP Primer for reliable adhesion on challenging non-porous surfaces like metal, existing tiles, and PVC. This solvent-free, low VOC primer delivers a textured finish and dries in 30 minutes, ensuring a strong bond for Gripset membranes and tile adhesives.

Use Gripset Xpress Primer H2O Plus for fast-drying vapour barrier priming on damp or green concrete and mineral surfaces, ready for overcoating in 1 hour. Its colour change indicator confirms readiness, preventing blistering and efflorescence.

Use Gripset Xpress SP to prime challenging non-porous and porous substrates, ensuring strong adhesion without etching and drying in 30 minutes for faster job completion.

Use Gripset E-60 as a two-component epoxy primer and moisture barrier for concrete and masonry. It withstands up to 2.5 bar hydrostatic pressure, applies to damp and green concrete, and is AS 4020 compliant for potable water.

Elastoproof B50 is a high-performance joint band for waterproofing detail work at junctions, corners, control and expansion joints. The central “Flexible Zone” accommodates movement in multiple directions with up to 100% elastic recovery, while the fleece edges embed into a wet liquid membrane to create a seamless, durable seal. Designed for trade use in commercial, industrial, and residential wet areas.

Pre-formed, stretchable waterproofing collars for sealing around pipe and service penetrations. Made from Gripset’s Elastoproof fabric with a central elastomeric zone, ensuring a watertight, flexible seal that integrates with liquid membranes. Available in multiple sizes for various pipe diameters.

Use Gripset BRW PF Squares for instant, primer-less sealing of penetrations and joint intersections, allowing immediate overcoating with membranes and finishes. Its 0.8mm butyl rubber provides a flexible, high-adhesion detail that prevents moisture ingress in critical areas, operating from -40°C to 100°C.

Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.

Use Gripset 38FC for rapid waterproofing of internal and external wet areas and roofs. It allows tiling in 4 hours and flood testing in 24 hours, supported by AS 4858 and AS 4654.1 compliance and >300% elongation.

Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.

Use Gripset P39 for compliant waterproofing in permanently wet areas, exposed roofs, and under tile. Its hybrid polyurethane formula ensures >300% Class III flexibility and will not re-emulsify, meeting AS 4858 and AS 4654.1 standards.

Use Gripset C-1P for demanding waterproofing jobs, resisting up to 5 bar positive and 1.5 bar negative hydrostatic pressure. This flexible, fibre-reinforced cementitious membrane bridges cracks up to 0.75 mm and holds AS 40200 potable water approval.

Use Gripset BRW PFN for compliant internal and external floor waterproofing, including anti-fracture over cracked substrates. This self-adhesive butyl rubber sheet delivers >60% elongation and performs from -30°C to 80°C, passing AS 4858 and AS 4654.1.

Use Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.

Use RLA Penapatch Fairing Coat Mortar for thin-layer concrete repairs up to 5mm, providing a smooth, durable finish. Its fast 25-minute working time and negligible shrinkage ensure efficient, quality results for exposed or over-coated applications.

Penapatch HB50 is a polymer-modified, fibre-reinforced, shrinkage-compensated structural repair mortar formulated for vertical, overhead and horizontal concrete repairs. Achieve high build in a single pass with excellent adhesion, low permeability and high ultimate strength — just add water.

Use RLA Penapatch HB80 for high-strength structural concrete repairs requiring up to 68 MPa compressive strength. It allows high-build applications in a single pass and offers excellent resistance to chloride attack and carbonation, making it suitable for durable long-term reinstatement.

Use RLA TruLevel BulkFill UT to correct deep imperfections on internal concrete substrates, achieving a strong, level surface from 3mm to 70mm. It provides a robust, pumpable base with high mechanical resistance, ready for most floor coverings in 24-36 hours.

Use RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.

Use RLA Penatech HES Grout for critical support and anchoring applications requiring fast load bearing. It delivers over 60 MPa compressive strength in 24 hours with dual-stage shrinkage compensation and AS1478 Class C compliance.

Use RLA Penaflow Panel Grout for high-strength, non-shrink structural support, achieving over 55 MPa compressive strength at 28 days with controlled plastic state expansion for reliable load transfer.

Use RLA Penaflow Panel Grout for critical non-shrink grouting of precast elements, anchor bolts, and voids. It delivers over 55 MPa strength at 28 days with 0% bleed and consistent plastic state expansion.

Use RLA TruLevel EconoScreed Rapid for rapid subfloor preparation where floor coverings need to go down fast. It achieves 65 MPa compressive strength and allows ceramic tiles in 4-6 hours, making it ideal for high-traffic and wet areas.

Use RLA TruLevel Flexi for internal levelling of concrete and timber subfloors from 1-20mm. Its fibre-reinforced, flexible formulation prevents cracking, achieves foot traffic in 2-3 hours, and allows floor covering installation in 12-24 hours.

Use RLA Penapatch Panel LW for fire-rated, non-structural concrete repairs on vertical and overhead surfaces. It provides a 4-hour fire rating to AS1530.4 at 35mm, allows single-application builds up to 100mm overhead, and achieves 20 MPa compressive strength.

Use RLA Moisture Seal as a high-performance 2-part epoxy barrier against moisture and vapour. It withstands 2.5 bar of hydrostatic pressure and can be applied to damp or "green" concrete, preventing moisture-related failures under overlaid finishes.

Use RLA 2 Part Cementitious Membrane for demanding immersion and potable water applications. This Class II flexible membrane is AS 4020 certified for drinking water and offers 214% elongation, ensuring a durable, compliant waterproof barrier under tiles.

Use RLA Foam Filler for high-yield filling and sealing of irregular gaps and cavities. It expands up to 45 times to form a stable, airtight seal, reducing callbacks from drafts and noise without distorting frames.

Use Mapei Mapeproof Swell Sealant for watertight sealing of confined joints, cracks, and penetrations in concrete. This hydro-expansive paste swells by ≥100% on water contact, resisting up to 1 atm of hydrostatic pressure for reliable protection against leaks.

Use Mapegrout T40 for R3 structural concrete repairs requiring medium mechanical performance. This 40 MPa, shrinkage-compensated, fibre-reinforced mortar applies without slump on vertical surfaces, ensuring durable and compliant repairs.

Use Planitop Fine Finish for feather-edge skim coating and levelling concrete surfaces up to 3mm. It delivers a breathable, uniform finish that is paintable in 7 days, avoiding surface imperfections under coatings.

Use Mapegrout Fast-Set Rapido for rapid structural concrete repairs. It achieves over 10 MPa compressive strength in 3 hours, holds 20-25 mm vertically without slump, and is classified R3 for efficient site turnaround.

Use MapePUR Universal Foam M/G for critical thermal and acoustic gap filling around windows, doors, and pipes. It offers 58 dB soundproofing and cures quickly, allowing cutting within 25-30 minutes.

Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.

White SBR latex admixture for cement screeds, renders and bonding slurries; EN 1542 adhesion exceeds 2.0 MPa after 28 days in the reference mortar.

Protect exposed SILCOR membrane roofs, decks and balconies with a UV-resistant non-slip top coat, 0.15 mm DFT and 2 hour drying at 25°C.

Use SILCOR 560 HB for Class III non-exposed waterproofing in internal wet areas and external under-screed applications. This high-build, polyurethane membrane is certified to AS 4654.1 and AS/NZS 4858, providing over 700% elongation for lasting performance.

Use SILCOR 560 HB LVOC for compliant, flexible waterproofing in critical internal wet areas and covered external applications, providing seamless protection and Class III crack bridging with a very low VOC formulation.

Use SILCOR 580 for certified heavy-duty trafficable waterproofing on car parks, balconies, and internal wet areas. This two-part polyurethane delivers over 700% elongation and 7MPa tensile strength, ensuring crack bridging and long-term performance under demanding conditions.

Use Mountain Grout Gel Foam for active water leak repairs in concrete. Its hydrophilic chemistry ensures up to 25 times expansion and high elongation for durable, flexible seals, especially under continuous water exposure.

Use Mountain Grout Flexible for permanent crack sealing in concrete infrastructure. This hydrophobic polyurethane expands up to 30 times into a closed-cell foam, remaining flexible (44% elongation) and resistant to wet/dry cycles without shrinkage.