Buzon PB-01 is an adjustable pedestal for raised paver floors or timber and composite decks from 28 mm to 42 mm. Use it on balconies, terraces, and roofs where a low build-up is needed. It leaves a void below the finish for drainage and services.
Use PB Spacer Tabs for pavers. Use PB-KIT-5 for a compatible deck joist. PB-01 is for external pedestrian floors. Do not use it for vehicles or vibrating machinery.
What height range does the Buzon PB-01 cover?
PB-01 adjusts from 28 to 42 mm. The current Buzon PB catalogue lists it as delivered assembled.
Buzon PB-01 adjustable pedestal for raised external paver and terrace systems.
Height range: 28–42 mm.
The current Buzon PB catalogue lists this model as delivered assembled.
Place the pedestal on a solid, stable support surface at the spacing required by the raised-floor design.
Adjust to the required height within 28–42 mm, fit the compatible spacer tab or support accessory, then check level and support before placing the finished paver or decking system.
Use only within the published 28–42 mm height range.
Pedestal spacing, finish type, supporting substrate, perimeter restraint and wind/load requirements must be determined for the project; do not treat a pedestal test load as the finished floor design capacity.
Use compatible Buzon PB heads and accessories for the selected finish.
Buzon PB-01 Pedestal – 28–42 mm Physical Properties
| Property | Value |
|---|---|
| Material | Copolymer Polypropylene (CPP), 80% recycled PPC, 20% Talc |
| Adjustment Range | 28 mm to 42 mm (Extendable to 56 mm with U-PH5) |
| Top Diameter | 170 mm |
| Base Diameter | 197 mm |
| Load Capacity | 974 kg (Full surface) |
| Service Temperature | -30°C to +80°C |
| Recycled Content | Minimum 50% |
| Weight | 232 g |
| Certifications | ISO472:2013 |
| Storage Requirements | Cool, dry place, avoid direct sunlight |
| Substrate Compatibility | Raised paver floors |