-
Panther GCS Quick Release Float HandleVendor:PantherThe quick-release float handle for the Panther Grout Cleanup System. Click a sponge in, wash, click it out, and the next sponge goes on in seconds: no screws, no downtime in the middle of a floor.The positive-click lock holds the sponge without wobble, so...
- $8.40
- $8.40
- Unit price
- per
-
Panther Levelling System WedgesVendor:PantherThe reusable half of the Panther levelling system. The wedge locks into the base clip and pulls the two tile edges to the same height, which is how you kill lippage on large-format and rectified tiles.Clips are single use; wedges come off clean and...
- $31.83
- $31.83
- Unit price
- per
-
Panther Levelling System Base ClipsVendor:PantherBase clips for the Panther tile levelling system, 1.5mm spacing, 500 to a pack. Seat one under each tile corner as you lay, and the clip holds the joint spacing while the wedge (sold separately) pulls the tiles level while the adhesive cures.Suits tiles...
- From $27.50
- From $27.50
- Unit price
- per
-
Replacement Sponge for Panther Grout Cleanup SystemVendor:PantherThe replacement sponge for the Panther Grout Cleanup System, cut to work with the TRI-roller wringer. It holds its shape through a job of wringing and lifts residue without dumping water back into fresh joints.Two sizes: 140x280mm and 180x335mm. Sponges are consumables; keep a...
- From $10.58
- From $10.58
- Unit price
- per
-
Panther Thin Turbo Diamond BladeVendor:PantherA thin turbo diamond blade for cutting porcelain, marble, and granite without chewing the edge. The thin rim takes a smaller bite per pass, which is what keeps chips out of expensive tile, and the reinforced core runs true instead of wobbling through the...
- From $29.92
- From $29.92
- Unit price
- per
-
DTA Flat Out Levelling System Tile Clips 1.5mmVendor:
Levelling clips stop tile lippage. Slot the clip base under two adjoining tiles, insert the Flat Out wedge with the pliers, and the clip pulls the tiles level while the adhesive cures. Break the stem off along the scored line next day and reuse...- From $27.50
- From $27.50
- Unit price
- per
Frequently Asked Questions
What does a tiling job include?
A tiling job can include substrate preparation, priming, drainage, waterproofing, tile setting, edge finishing, grouting and joint sealing. Work through each step in the order your approved tile system requires.
When do I need waterproofing before tiling?
Use a tanking membrane where the tiled area is a wet area or the specified system needs an under-tile waterproof layer. Install drainage and prepare the substrate before the membrane.
What is the difference between grouting and sealing?
Grout fills tile joints after the adhesive has cured. Sealant is used later at movement joints and sanitary edges, where a flexible joint is needed.
Why is drainage a separate tiling step?
A floor waste or linear channel must be selected and installed before the tile finish is set. This lets the tile layout and falls work with the drainage outlet.
How do I choose the right tile adhesive?
Match the adhesive to the tile, the substrate, and the job exposure. Ready-mixed adhesives suit small domestic repairs. Powder adhesives mix on site and handle larger areas or wet-room work. Check the product data for the tile types and substrates each adhesive covers.
Which silicone sealant fits my job?
Pick the sealant by the joint and the exposure. Kitchen and bath silicone handles wet interior joints. Sanitary silicone resists mould at bath and shower edges. Multi-colour flexi-gap sealant fills colour-matched movement joints.