-
Everflex WPM Elastomeric Waterproof MembraneVendor:
Use Everflex WPM for under-tile waterproofing of wet areas and balconies, meeting AS4858 Class III and AS4654.1 standards. Its rapid drying and no re-emulsification formula ensures reliable, compliant results before tiling.- $176.09
- $176.09
- Unit price
- per
-
Everflex Aqua-Ban Elastomeric Waterproof MembraneVendor:
Use Everflex Aqua-Ban for NCC compliant under-tile waterproofing in wet areas and balconies. This Class III elastomeric membrane offers 391% elongation and rapid drying for confident, compliant installations ready for tiling in 48 hours.
- $140.53
- $140.53
- Unit price
- per
-
Everflex WPUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant, UV-exposed waterproofing on roofs, balconies, and wet areas. Its Class 3 elastomeric formulation withstands maintenance foot traffic and will not re-emulsify, ensuring long-term performance.
- $177.01
- $177.01
- Unit price
- per
-
Everflex HVUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant Class 3 waterproofing on UV-exposed external and internal wet areas. This single-component, elastomeric membrane is tested to AS4858 and AS4654.1, remaining flexible and non-re-emulsifying even under full immersion after curing.
- $177.02
$0.00- $177.02
- Unit price
- per
-
Gripset 38FC MembraneVendor:
Use Gripset 38FC for rapid waterproofing of internal and external wet areas and roofs. It allows tiling in 4 hours and flood testing in 24 hours, supported by AS 4858 and AS 4654.1 compliance and >300% elongation.- From $93.63
- From $93.63
- Unit price
- per
-
Gripset LS Trafficable CoatingVendor:
Use Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.
- $230.09
- $230.09
- Unit price
- per
-
Gripset C-1P Cementitious MembraneVendor:
Use Gripset C-1P for demanding waterproofing jobs, resisting up to 5 bar positive and 1.5 bar negative hydrostatic pressure. This flexible, fibre-reinforced cementitious membrane bridges cracks up to 0.75 mm and holds AS 40200 potable water approval.
- $166.30
- $166.30
- Unit price
- per
-
Gripset 2P Class II MembraneVendor:
Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.
- $188.44
- $188.44
- Unit price
- per
-
Silcor 560 HB Low VOC MembraneVendor:
Use SILCOR 560 HB LVOC for compliant, flexible waterproofing in critical internal wet areas and covered external applications, providing seamless protection and Class III crack bridging with a very low VOC formulation.- $263.58
- $263.58
- Unit price
- per
-
Everflex Multi-Prime Acrylic PrimerVendor:
Use Everflex Multi-Prime for preparing both porous and non-porous substrates before applying waterproofing membranes, tile adhesives, or levelling compounds. It offers rapid 1-hour drying and system compatibility, reducing callbacks and speeding up project timelines.
- From $71.69
- From $71.69
- Unit price
- per
-
Polyester Reinforcing Fabric - Easy FormVendor:
Use Easy Form polyester reinforcing fabric to strengthen liquid waterproofing membranes. It prevents tenting and bridging on rough substrates and critical joints, ensuring a durable, crack-free seal.
- From $27.61
- From $27.61
- Unit price
- per
-
Polyester Reinforcing Fabric - Easy FoldVendor:
Polyester Reinforcing Fabric - Easy Fold is a versatile, non-woven polyester mat designed to reinforce corners and joints in waterproofing membrane installations. Its unique "easy fold" design makes it incredibly simple to create precise and secure folds, even in tight spaces. This fabric enhances...
- $32.76
- $32.76
- Unit price
- per
-
80mm Square Megaflex Stick Down Floor WasteVendor:ART AustraliaUse the 80mm Square Megaflex Stick Down Floor Waste for compliant, watertight drainage in wet areas. Its ABS Megaflex flange bonds directly to waterproofing membranes, supported by a durable brass grate for long-term performance.
- From $25.60
$0.00- From $25.60
- Unit price
- per
-
80mm Round Megaflex Stick Down Floor WasteVendor:ART AustraliaDurable floor waste with solid brass grate and ABS Megaflex™ flange for low-profile installation. Choose 50mm or 80mm outlet for versatile applications.
- From $30.69
$0.00- From $30.69
- Unit price
- per
-
316 Stainless Steel Square Tile Insert with Megaflex OutletVendor:ART AustraliaUse the 316 Stainless Steel Square Tile Insert with Megaflex Outlet for discreet, corrosion-resistant floor drainage. Its 316 marine-grade steel construction ensures long-term integrity, while the Megaflex ABS base simplifies connection for precise alignment.
- $50.80
- $50.80
- Unit price
- per
-
100mm Round Megaflex Stick Down Floor WasteVendor:ART AustraliaUse the 100mm Round Megaflex Stick Down Floor Waste for compliant, high-capacity drainage in commercial wet areas. Its ABS Megaflex flange securely integrates with waterproofing membranes, preventing leaks, and the WaterMark certification ensures it meets Australian standards for plumbing installations.
- From $42.97
- From $42.97
- Unit price
- per
-
100mm Square Megaflex Stick Down Floor WasteVendor:ART AustraliaUse the 100mm Square Megaflex Stick Down Floor Waste for high-capacity drainage in wet areas, integrating directly with waterproofing membranes. Its AS/NZS 3500 compliance and robust ABS flange prevent leaks and ensure long-term reliability.
- $41.85
- $41.85
- Unit price
- per
-
Megaflex™ Puddle FlangeVendor:ART AustraliaUse Megaflex™ Puddle Flange to create a watertight seal at pipe penetrations in concrete slabs. Its high-grade PVC design acts as a water-stop, preventing moisture tracking, compliant with AS/NZS 1260.
- From $7.68
- From $7.68
- Unit price
- per
-
Gripset P39 MembraneVendor:
Use Gripset P39 for compliant waterproofing in permanently wet areas, exposed roofs, and under tile. Its hybrid polyurethane formula ensures >300% Class III flexibility and will not re-emulsify, meeting AS 4858 and AS 4654.1 standards.
- $232.47
- $232.47
- Unit price
- per
-
Gripset Elastoproof Prefabricated CornersVendor:
Use Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.
- $90.65
- $90.65
- Unit price
- per
-
RLA 2 Part Cementitious MembraneVendor:RLAUse RLA 2 Part Cementitious Membrane for demanding immersion and potable water applications. This Class II flexible membrane is AS 4020 certified for drinking water and offers 214% elongation, ensuring a durable, compliant waterproof barrier under tiles.
- $251.23
- $251.23
- Unit price
- per
-
Gripset BRW PFNVendor:
Use Gripset BRW PFN for compliant internal and external floor waterproofing, including anti-fracture over cracked substrates. This self-adhesive butyl rubber sheet delivers >60% elongation and performs from -30°C to 80°C, passing AS 4858 and AS 4654.1.
- $481.10
- $481.10
- Unit price
- per
-
Sikalastic®-1K MortarVendor:
Use Sikalastic-1K for flexible waterproofing and concrete protection. It provides crack-bridging ability up to 0.75 mm and resists negative pressure up to 2.5 bar for 72 hours, offering certified performance for drinking water contact and external membranes.- $213.07
- $213.07
- Unit price
- per
-
Duram 195Vendor:
Use Duram 195 as a Class III elastomeric waterproofing membrane for non-exposed areas, providing 400% elongation and Green Star compliant low VOCs. It requires a dry substrate and must be covered or top-coated with Multithane ATC for UV exposure.- $319.58
- $319.58
- Unit price
- per
-
Duram Azcothane ReoVendor:
Use Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.
- $167.05
- $167.05
- Unit price
- per
-
GCP Epocote F100W Clear Epoxy PrimerVendor:
GCP Epocote F100W is a clear, two-pack, water-based epoxy primer and sealer. Designed for priming damp or green concrete, it offers an exceptionally long pot-life and fast cure, ensuring a tough, chemically resistant bond for professional waterproofing membrane systems.
- From $445.10
- From $445.10
- Unit price
- per
-
Silcor 575 MembraneVendor:
Use SILCOR 575 LB for Class III compliant waterproofing on horizontal balconies, green roofs, and internal wet areas. Its 800%+ elongation and seamless application prevent callbacks from movement or joints.
- $316.77
- $316.77
- Unit price
- per
-
Silcor Primer BSVendor:
Use SILCOR Primer BS for reliable adhesion of SILCOR polyurethane membranes to most rigid construction substrates. Its fast-drying (30-60 min) modified polyurethane resin ensures a strong bond and water resistance, critical for weather-interrupted jobs.
- $282.35
- $282.35
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Use Kerapoxy Adhesive for demanding tile and stone installations where strength and chemical resistance are critical. Its R2T classification provides no vertical slip and excellent long-term bond, preventing failures in pools and external areas.- $181.98
- $181.98
- Unit price
- per
-
Gripset C-Lite Tile AdhesiveVendor:
Use Gripset C-Lite for critical tiling jobs that demand durability and flexibility, such as immersed areas, large format tiles, and underfloor heating. Its C2TES2 classification ensures high bond strength and deformability in challenging conditions.
- $45.47
- $45.47
- Unit price
- per
-
100mm Brass Round Push In PVC GrateVendor:ART AustraliaUse for compliant drainage in wet areas with a quick, tool-free push-in installation. Its solid brass core and chrome plate finish ensure durability and AS/NZS 1192-2004 compliance.
- From $20.37
- From $20.37
- Unit price
- per
-
Adheseal Backing Rod Closed Cell - RoundVendor:
Adheseal Closed Cell Backing Rod is a high-quality polyethylene foam filler designed for construction joints, providing excellent support and preventing 3-sided adhesion for sealants.
- From $12.30
- From $12.30
- Unit price
- per
-
Mapei Kerapoxy Easy Design Grout and AdhesiveVendor:
Use Mapei Kerapoxy Easy Design for grouting 1-15mm joints and adhering tiles in demanding environments. This acid-resistant, bacteriostatic epoxy is certified for hygiene, delivers high mechanical strength, and offers decorative flexibility with add-ins.
- From $95.50
- From $95.50
- Unit price
- per
-
Balcony Drip Angle 90° Internal CornerVendor:
Why Choose Balcony Drip Angle 90° Internal Corner Use Balcony Drip Angle 90° Internal Corner for critical junctions where a factory-precise 90° internal corner is required to stop water tracking and provide a rigid substrate for membrane termination. This anodised aluminium component delivers a...
- $23.63
- $23.63
- Unit price
- per
-
Mapei Keraflex Maxi S1 Cementitious AdhesiveVendor:
Use Keraflex Maxi S1 for large format tiles and natural stone on walls and floors. Its C2TE S1 rating ensures no vertical slip and excellent deformability, making it reliable for challenging installations that need extended open time.
- From $43.33
- From $43.33
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Waterproofing Materials
Wet areas, balconies, rooftops, retaining walls, planter boxes — this range covers the waterproofing membranes and sealants that keep water where it belongs on Australian sites. Class III elastomeric membranes tested to AS 4858 and AS 4654.1 sit alongside polyurethane and MS polymer sealants rated for ±25–50% movement, so you...
Wet areas, balconies, rooftops, retaining walls, planter boxes — this range covers the waterproofing membranes and sealants that keep water where it belongs on Australian sites. Class III elastomeric membranes tested to AS 4858 and AS 4654.1 sit alongside polyurethane and MS polymer sealants rated for ±25–50% movement, so you can match the product to the substrate, exposure, and curing window your job demands.
From rapid-cure membranes that let you tile in four hours to UV-stable trafficable coatings and potable-water certified sealants, every product in this range is selected for predictable performance on concrete, blockwork, timber, aluminium and ceramics — without primer in most cases.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.