Filter
30 results
50
- 10
- 15
- 20
- 25
- 30
- 50
Featured
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Everflex WPUV Elastomeric Waterproof MembraneUse Everflex WPUV for compliant, UV-exposed waterproofing on roofs, balconies, and wet areas. Its Class 3 elastomeric formulation withstands maintenance foot traffic and will not re-emulsify, ensuring long-term performance.
- $177.01
- $177.01
- Unit price
- / per
-
Everflex HVUV Elastomeric Waterproof MembraneUse Everflex WPUV for compliant Class 3 waterproofing on UV-exposed external and internal wet areas. This single-component, elastomeric membrane is tested to AS4858 and AS4654.1, remaining flexible and non-re-emulsifying even under full immersion after curing.
- $177.02
$0.00- $177.02
- Unit price
- / per
-
Gripset 38FC MembraneUse Gripset 38FC for rapid waterproofing of internal and external wet areas and roofs. It allows tiling in 4 hours and flood testing in 24 hours, supported by AS 4858 and AS 4654.1 compliance and >300% elongation.
- From $93.63
- From $93.63
- Unit price
- / per
-
Gripset LS Trafficable CoatingUse Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.
- $230.09
- $230.09
- Unit price
- / per
-
Gripset C-1P Cementitious MembraneUse Gripset C-1P for demanding waterproofing jobs, resisting up to 5 bar positive and 1.5 bar negative hydrostatic pressure. This flexible, fibre-reinforced cementitious membrane bridges cracks up to 0.75 mm and holds AS 40200 potable water approval.
- $166.30
- $166.30
- Unit price
- / per
-
Silcor 560 HB Low VOC MembraneUse SILCOR 560 HB LVOC for compliant, flexible waterproofing in critical internal wet areas and covered external applications, providing seamless protection and Class III crack bridging with a very low VOC formulation.
- $263.58
- $263.58
- Unit price
- / per
-
Gripset BRW PF SquareUse Gripset BRW PF Squares for instant, primer-less sealing of penetrations and joint intersections, allowing immediate overcoating with membranes and finishes. Its 0.8mm butyl rubber provides a flexible, high-adhesion detail that prevents moisture ingress in critical areas, operating from -40°C to 100°C.
- From $9.99
- From $9.99
- Unit price
- / per
-
Gripset Elastoproof Base CollarsPre-formed, stretchable waterproofing collars for sealing around pipe and service penetrations. Made from Gripset’s Elastoproof fabric with a central elastomeric zone, ensuring a watertight, flexible seal that integrates with liquid membranes. Available in multiple sizes for various pipe diameters.
- From $22.52
- From $22.52
- Unit price
- / per
-
Gripset P39 MembraneUse Gripset P39 for compliant waterproofing in permanently wet areas, exposed roofs, and under tile. Its hybrid polyurethane formula ensures >300% Class III flexibility and will not re-emulsify, meeting AS 4858 and AS 4654.1 standards.
- $232.47
- $232.47
- Unit price
- / per
-
Gripset Elastoproof Prefabricated CornersUse Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.
- $90.65
- $90.65
- Unit price
- / per
-
Fatrafol 810v Reinforced PVC Roofing MembraneVendor:FatraFatrafol 810v is a high-quality, reinforced PVC roofing membrane designed for single-ply flat roofing applications. It's UV resistant, mechanically anchored, and suitable for a wide range of projects.
- From $1,504.00
- From $1,504.00
- Unit price
- / per
-
Fatrafol 807v Reinforced Waterproofing MembraneVendor:FatraUse Fatrafol 807v for adhered roofing systems where its 120 g/m² non-woven PES-textile backing ensures a secure bond. It provides reliable, UV-resistant waterproofing for long-term performance.
- From $1,674.64
- From $1,674.64
- Unit price
- / per
-
Fatrafol 804 Unreinforced Waterproofing MembraneVendor:FatraFatrafol 804 is a UV-resistant, unreinforced PVC waterproofing membrane designed for detailed finishing and joining within Fatrafol reinforced roofing systems. It's ideal for use on roofs and must be installed by trained professionals.
- From $960.00
- From $960.00
- Unit price
- / per
-
Fatra PVC Coated AngleVendor:FatraThe Fatranyl PVC coated termination angles come in various different dimensions depending on the purpose and application of the Fatra PVC membrane system. Fatranyl PVC coated angles can alos be fabricated to any site specific dimensions upon request.
- From $351.90
- From $351.90
- Unit price
- / per
-
Gripset BRW PFNUse Gripset BRW PFN for compliant internal and external floor waterproofing, including anti-fracture over cracked substrates. This self-adhesive butyl rubber sheet delivers >60% elongation and performs from -30°C to 80°C, passing AS 4858 and AS 4654.1.
- $481.10
- $481.10
- Unit price
- / per
-
Duram Azcothane ReoUse Duram Azcothane Reo for protected wet area and balcony waterproofing where AS 4858 compliance is required. Its internal microfibre reinforcement provides 311% elongation and passes cyclic movement tests, allowing for direct stick tiling without external fabric in most cases.
- $167.05
- $167.05
- Unit price
- / per
-
Everflex Polyurethane SupaprimeUse Everflex Supaprime to ensure robust adhesion for Adheseal sealants and membranes on porous substrates like concrete and timber. Its rapid cure and deep penetration prevent costly delamination, providing a reliable bond for critical applications.
- $59.51
- $59.51
- Unit price
- / per
-
Fatrabond 1214 Roller Applied Polyurethane Adhesive 20LVendor:FatraUse Fatrabond 1214 for roller-applied bonding of Fatrafol felt-backed roof membranes, delivering rapid hardening and preventing blistering with its solvent-free MCPU formulation.
- $936.00
- $936.00
- Unit price
- / per
-
Gripset 51 MembraneUse Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.
- From $71.51
- From $71.51
- Unit price
- / per
-
Silcor 575 MembraneUse SILCOR 575 LB for Class III compliant waterproofing on horizontal balconies, green roofs, and internal wet areas. Its 800%+ elongation and seamless application prevent callbacks from movement or joints.
- $316.77
- $316.77
- Unit price
- / per
-
Silcor 580 MembraneUse SILCOR 580 for certified heavy-duty trafficable waterproofing on car parks, balconies, and internal wet areas. This two-part polyurethane delivers over 700% elongation and 7MPa tensile strength, ensuring crack bridging and long-term performance under demanding conditions.
- $659.77
- $659.77
- Unit price
- / per
-
Silcor Primer BSUse SILCOR Primer BS for reliable adhesion of SILCOR polyurethane membranes to most rigid construction substrates. Its fast-drying (30-60 min) modified polyurethane resin ensures a strong bond and water resistance, critical for weather-interrupted jobs.
- $282.35
- $282.35
- Unit price
- / per
-
Leister UNIDRIVE 500 Semi-Automatic Welding MachineVendor:LeisterUse the Leister UNIDRIVE 500 for consistent, high-speed welding of thermoplastic membranes on roofs and for critical detailing. Its digital control and 4.5 m/min speed prevent seam failure and increase productivity over manual methods.
- $10,179.60
- $10,179.60
- Unit price
- / per
-
Adheseal Matt Seal S-250 Sanitary SIlicone SealantUse Adheseal Matt Seal S-250 for flexible, mould-resistant joint sealing in wet areas like showers or kitchens. Its neutral cure prevents corrosion on metals like galvanised steel, and it accommodates ±30% joint movement.
- From $6.86
$0.00- From $6.86
- Unit price
- / per
-
Adheseal N40 Silicone Sealant Aluminium GreyUse Adheseal N40 Silicone for flexible, anti-fungal sealing in wet areas and high-movement joints. Its neutral cure prevents corrosion on metals like Zincalume, a key differentiator over acid-cure alternatives.
- From $6.94
- From $6.94
- Unit price
- / per
-
MapePUR Universal Foam M/GUse MapePUR Universal Foam M/G for critical thermal and acoustic gap filling around windows, doors, and pipes. It offers 58 dB soundproofing and cures quickly, allowing cutting within 25-30 minutes.
- From $22.20
- From $22.20
- Unit price
- / per
-
Adheseal IPA CleanerUse Adheseal IPA Cleaner for critical surface preparation, removing oils, grime, and fluxes without leaving residue. This ensures sealants and adhesives achieve maximum bond strength and cure correctly across a wide range of surfaces.
- From $17.50
- From $17.50
- Unit price
- / per
-
Adheseal S100 Sanitary Silicone SealantUse Adheseal S100 for sealing movement joints in wet areas, achieving a waterproof, anti-fungal seal that accommodates ±30% movement. Its neutral cure prevents corrosion, and it remains UV stable and colour fast for durable internal or external use.
- From $6.86
$0.00- From $6.86
- Unit price
- / per
-
Adheseal N40 Slicone SealantUse Adheseal N-40 for flexible, anti-fungal sealing in wet areas and high-movement joints, resisting temperatures from -50°C to +150°C without corroding galvanised steel.
- From $6.40
- From $6.40
- Unit price
- / per
-
Everflex PU240 Polyurethane Adhesive and SealantUse Adheseal PU-240 for high-strength, flexible sealing and bonding in demanding construction and marine applications. With +/- 25% movement capability and 35 Shore A hardness, it ensures a durable, waterproof, and abrasion-resistant joint.
- From $11.74
- From $11.74
- Unit price
- / per






