-
Everflex WPUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant, UV-exposed waterproofing on roofs, balconies, and wet areas. Its Class 3 elastomeric formulation withstands maintenance foot traffic and will not re-emulsify, ensuring long-term performance.- $177.01
- $177.01
- Unit price
- per
-
Everflex HVUV Elastomeric Waterproof MembraneVendor:
Use Everflex WPUV for compliant Class 3 waterproofing on UV-exposed external and internal wet areas. This single-component, elastomeric membrane is tested to AS4858 and AS4654.1, remaining flexible and non-re-emulsifying even under full immersion after curing.
- $177.02
$0.00- $177.02
- Unit price
- per
-
Gripset 2P Class II MembraneVendor:
Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.- $188.44
- $188.44
- Unit price
- per
-
Silcor 560 HB Low VOC MembraneVendor:
Use SILCOR 560 HB LVOC for compliant, flexible waterproofing in critical internal wet areas and covered external applications, providing seamless protection and Class III crack bridging with a very low VOC formulation.- $263.58
- $263.58
- Unit price
- per
-
Everflex Primer WBPVendor:
Use Primer WBP for preparing porous concrete and screeds for Adheseal water-based membranes. It beds down dust and ensures strong adhesion, meeting Green Star criteria with very low VOCs.
- From $48.26
- From $48.26
- Unit price
- per
-
Everflex VBS Water-based Epoxy PrimerVendor:
Use Everflex VBS as a 2-part water-based epoxy primer and negative pressure vapour barrier for damp or green concrete. It withstands up to 25m (250 kPa) hydrostatic pressure and allows overcoating in 4-24 hours, preventing moisture-related system failures and accelerating project timelines.
- $440.44
- $440.44
- Unit price
- per
-
Gripset GP PrimerVendor:
Use Gripset GP Primer for enhancing adhesion of Gripset membranes and tile adhesives on porous substrates. It dries in 30 minutes, covers 8-10m² per litre, and is crucial for preventing callbacks due to poor bonding.
- From $87.36
- From $87.36
- Unit price
- per
-
Gripset Elastoproof Prefabricated CornersVendor:
Use Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.
- $90.65
- $90.65
- Unit price
- per
-
Gripset C-PlugVendor:
Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.
- From $51.96
- From $51.96
- Unit price
- per
-
Gripset E-60 Epoxy PrimerVendor:
Use Gripset E-60 as a two-component epoxy primer and moisture barrier for concrete and masonry. It withstands up to 2.5 bar hydrostatic pressure, applies to damp and green concrete, and is AS 4020 compliant for potable water.
- From $106.24
- From $106.24
- Unit price
- per
-
Gripset BRW HDVendor:
Use Gripset BRW HD for instant, flexible subterranean and wet area waterproofing. Its self-adhesive butyl rubber and HDPE construction eliminates curing delays, resists extreme temperatures from -30°C to 80°C, and stands up to ground salts.
- $462.21
- $462.21
- Unit price
- per
-
Megapoxy LVSVendor:
Use Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.- From $216.72
- From $216.72
- Unit price
- per
-
Sikalastic®-1K MortarVendor:
Use Sikalastic-1K for flexible waterproofing and concrete protection. It provides crack-bridging ability up to 0.75 mm and resists negative pressure up to 2.5 bar for 72 hours, offering certified performance for drinking water contact and external membranes.- $213.07
- $213.07
- Unit price
- per
-
Gripset 51 MembraneVendor:
Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.
- From $71.51
- From $71.51
- Unit price
- per
-
Pasco AquastopVendor:
Use Pasco Aquastop for waterproofing non-moving concrete construction joints and penetrations. It expands up to 300%, withstands over 70m hydrostatic head, and remains active and self-healing in potable water.- From $69.70
- From $69.70
- Unit price
- per
-
RLA Moisture Seal PrimerVendor:RLAUse RLA Moisture Seal as a high-performance 2-part epoxy barrier against moisture and vapour. It withstands 2.5 bar of hydrostatic pressure and can be applied to damp or "green" concrete, preventing moisture-related failures under overlaid finishes.
- $459.03
- $459.03
- Unit price
- per
-
Silcor 575 MembraneVendor:
Use SILCOR 575 LB for Class III compliant waterproofing on horizontal balconies, green roofs, and internal wet areas. Its 800%+ elongation and seamless application prevent callbacks from movement or joints.
- $316.77
- $316.77
- Unit price
- per
-
Silcor 580 MembraneVendor:
Use SILCOR 580 for certified heavy-duty trafficable waterproofing on car parks, balconies, and internal wet areas. This two-part polyurethane delivers over 700% elongation and 7MPa tensile strength, ensuring crack bridging and long-term performance under demanding conditions.
- $659.77
- $659.77
- Unit price
- per
-
Pasco Hypersil 912 Silicone SealantVendor:
Use Pasco Hypersil 912 for sealing wet areas like showers, kitchens, and laundries. This neutral cure, 100% silicone sealant resists mould and mildew, offers ±25% joint movement, and will not corrode metal.
- $138.80
- $138.80
- Unit price
- per
-
Mapei Mapeproof Swell SealantVendor:
Use Mapei Mapeproof Swell Sealant for watertight sealing of confined joints, cracks, and penetrations in concrete. This hydro-expansive paste swells by ≥100% on water contact, resisting up to 1 atm of hydrostatic pressure for reliable protection against leaks.- $332.94
- $332.94
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
Use Mapei Lamposilex to instantly stop active water leaks in concrete and masonry. It sets in 90 seconds, withstands pressurised water, and is AS/NZS 4020:2018 certified for potable water contact.
- From $49.53
- From $49.53
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Waterproofing Materials
Wet areas, balconies, rooftops, retaining walls, planter boxes — this range covers the waterproofing membranes and sealants that keep water where it belongs on Australian sites. Class III elastomeric membranes tested to AS 4858 and AS 4654.1 sit alongside polyurethane and MS polymer sealants rated for ±25–50% movement, so you...
Wet areas, balconies, rooftops, retaining walls, planter boxes — this range covers the waterproofing membranes and sealants that keep water where it belongs on Australian sites. Class III elastomeric membranes tested to AS 4858 and AS 4654.1 sit alongside polyurethane and MS polymer sealants rated for ±25–50% movement, so you can match the product to the substrate, exposure, and curing window your job demands.
From rapid-cure membranes that let you tile in four hours to UV-stable trafficable coatings and potable-water certified sealants, every product in this range is selected for predictable performance on concrete, blockwork, timber, aluminium and ceramics — without primer in most cases.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.