13
Use Lauxes Waste Corner Joiner 90° Pair for: Creating seamless and rustproof 90° turns in extended Lauxes linear grate installations
The Lauxes Waste Corner Joiner 90° Pair provides a simple, durable solution for forming 90° corners in Lauxes linear grate installations. These anodised aluminium joiners are rustproof and visually coordinated with Lauxes grate systems, making them the ideal choice for builders, waterproofers, and landscapers installing long drainage runs around corners. Available in Silk Silver, Midnight Black, and Matte Gold, they maintain clean design lines and high performance in any Australian climate.
Primer Information: No primer or adhesive required. Joiners fit mechanically into Lauxes grate ends for secure, flush alignment.
Cure Time: None. Immediate structural fit and function upon installation.
Coverage Rate: One pair covers a single 90° corner.
Application Temperature Range: -40°C to 90°C (-40°F to 194°F) – suited to all Australian climates.
Chemical Properties: Made from anodised aluminium for long-term resistance to UV, salt, water, and urban pollutants, making them ideal for coastal, poolside, and wet area installations.
Key Features of Lauxes Waste Corner Joiner 90° Pair
- Crafted from anodised aluminium for corrosion resistance
- Available in Silk Silver, Midnight Black, and Matte Gold
- Fits perfectly with all compatible Lauxes grate systems
- Tool-free installation with a secure, seamless fit
Why Choose Lauxes Waste Corner Joiner 90° Pair:
- Enables neat, professional corner joins without cutting or welding
- Backed by a Lifetime Rustproof Warranty for peace of mind
- Perfect for both indoor and outdoor drainage projects
- Improves aesthetic consistency and speeds up installation
When to Choose Lauxes Waste Corner Joiner 90° Pair versus Alternatives:
- Choose this product over mitre-cutting when: You need a fast, precise, rustproof solution for corners in Lauxes grates
- Consider alternatives when: A custom angle is required (non-90°), or when using non-Lauxes grates
Trade-Specific Applications for Lauxes Waste Corner Joiner 90° Pair:
For Builders and Carpenters:
- Install at deck or patio corners with minimal labour
- Ensures structural alignment and clean joins on timber and concrete substrates
- Speeds up grate installation with a consistent finish
For Waterproofers:
- Use in tiled showers, balconies, or pool surrounds for continuous drainage paths
- Maintains waterproof integrity with no cutting required
- Non-reactive anodised finish is compatible with membranes and sealants
Application Information
- Required Tools: Rubber mallet, measuring tape, Lauxes-compatible cutting tool (for grate only if needed)
- Trade-Specific Tips: Always dry-fit and square both sides for a perfect 90° corner
- Common Issues and Solutions: Minor misalignments – adjust before tapping joiners fully into place
Storage and Shelf Life
- Storage Requirements: Keep dry; anodised finish resists oxidation in coastal and humid climates
- Shelf Life Information: Unlimited under normal indoor conditions
- Temperature Considerations: Withstands typical Australian extremes without performance degradation
Certifications and Compliance
- Conforms to Australian Building Code for drainage hardware
- Suitable for AS/NZS 3500 drainage system use
- Covered under Lauxes Lifetime Rustproof Warranty
Frequently Asked Questions About Lauxes Waste Corner Joiner 90° Pair
Q: Do these joiners fit all Lauxes grates?
A: Yes, the 90° joiners are compatible with a wide range of Lauxes grate profiles including NXT, ST, SFG, and more. Always confirm your profile before purchase.
Q: Can they be used for outdoor installations?
A: Yes, they are ideal for outdoor use. The anodised aluminium construction resists rust and corrosion even in coastal and wet conditions.
Q: Is silicone required during installation?
A: No, the joiners fit securely without adhesives. However, in high-moisture or sealed environments, silicone may be used for added protection.
Q: Can I adjust the angle from 90°?
A: No, these joiners are fixed at 90° only. For other angles, custom cutting of the grates will be required.
Q: Do I need special tools for installation?
A: Just a rubber mallet and measuring tape. A mitre saw may be needed if the grate requires trimming before inserting the joiners.
Use Lauxes Waste Corner Joiner 90° Pair for:
- Balcony drainage corners
- Poolside and outdoor paving transitions
- Bathroom and wet area 90° installations
Why Use Lauxes Waste Corner Joiner 90° Pair for:
- Seamless corner transitions without onsite cutting
- Superior corrosion protection even in coastal areas
- Time-saving installation with architectural consistency
How to apply 90° Aluminium Joiners:
- Mark the 90° corner and trim the Lauxes grate ends as required using a mitre saw or aluminium cutter.
- Dry-fit the joiners to confirm correct alignment and flow direction.
- Tap the joiners into the ends of the grates using a rubber mallet for a snug fit.
- Check water flow and alignment before securing final installation.
Lauxes Waste Corner Joiner 90° Pair limitations:
- Only suitable for 90° connections—does not support other angles
- Designed specifically for use with Lauxes grate systems
Safety precautions when using Lauxes Waste Corner Joiner 90° Pair:
- Personal Protective Equipment: Use gloves and eye protection when cutting aluminium grates
- Ventilation: Not applicable—no solvents or adhesives used
- Handling: Avoid sharp edges; use tools to reduce hand strain
- First Aid: Clean and dress any cuts immediately with antiseptic
90° Aluminium Joiners can be used on the following substrates:
- aluminium — matches anodised Lauxes grates
- anodised aluminium — perfectly compatible with all Lauxes profiles
- Choosing a selection results in a full page refresh.