Download Product Data
The ART Australia 100×100mm Lowline Megaflex Square is a lower-profile tile-insert floor waste for showers and other tiled wet areas where the available floor build-up is limited. It provides the discreet square Bermuda finish while allowing the installer to plan around a shallower drainage assembly.
When to select Lowline
Use the Lowline family when the required installation depth differs from ART's standard Bermuda Megaflex waste. The recessed top receives a matching floor tile and drains around the insert, so the waste remains visually integrated with the surrounding tiled surface. Product options cover nominal 50 mm, 80 mm and 100 mm outlets as listed.
Do not select by tile-insert size alone
Confirm available slab or screed depth, pipe connection, grout and tile thickness, waterproofing interface and removable strainer access. ART's low-profile assembly uses a solid-brass upper fitting with an ABS Megaflex base. Choose the correct outlet and finish; raw polished brass will develop patina over time. The drain is one part of the finished waterproofing and drainage system.
100x100mm Lowline Megaflex™ Square Physical Properties
| Property | Value |
|---|---|
| Product Type | Lowline square Bermuda Megaflex tile-insert waste |
| Nominal Face | 100 × 100 mm |
| Listed Outlet Sizes | 50, 80 and 100 mm |
| Material | Solid-brass upper body with ABS Megaflex base |
| Included Components | Stainless steel strainer |
| Profile | Lowline / lower floor build-up |
| Manufacturer Reference | 11213/11214/11215 outlet families |
| Finish Note | Raw polished brass naturally patinates |


















