13
Trade quote
Custom pricing available
Tell us what you need and we'll come back with a quote.
Custom trade quote
Share your quantity and project details for a tailored quote.
Lauxes Grates Waste Joiner 180° Pair is a precision-engineered anodised aluminium fitting designed for the structural extension of linear grate profiles in demanding architectural and coastal drainage systems. This mechanical press-fit system eliminates the need for primers or adhesives, preventing alignment drift and ensuring a rustproof connection that withstands chlorinated water and salt air exposure.
The colour-matched finishes including Silk Silver, Midnight Black, and Matte Gold provide seamless visual integration across long spans while maintaining the integrity of the designer anodised finish.
Frequently Asked Questions About 180° Joiners
Q: Do 180° Joiners require sealant?
A: No, these are mechanical joiners. However, for high-waterflow areas, silicone sealant may be used for added waterproofing.
Q: Are these compatible with older Lauxes grates?
A: Only certain models are supported. Please confirm compatibility with your specific grate profile from the listed model numbers.
Q: Can these be used in coastal areas?
A: Yes, they are made from anodised aluminium with full corrosion resistance, making them ideal for salty or humid environments.
Q: What if my grates are longer than 11 metres?
A: Multiple joiners can be used sequentially to link extended lengths of grates safely and securely.
Q: How do I choose between colour options?
A: Choose a finish that matches your installed Lauxes grate profile for a seamless appearance—Silver for standard, Black or Gold for premium finishes.
Use 180° Joiners for:
- Extending linear drainage systems in commercial and residential spaces
- Joining grates in pool areas, driveways, patios, and courtyards
- Maintaining structural alignment over long spans
Why Use 180° Joiners for:
- Reliable rustproof connection even in harsh Australian conditions
- Faster installation with no adhesive or waiting times
- Designer colour options to match premium finishes
How to apply 180° Joiners:
- Ensure both grates to be joined are of the same profile and compatible.
- Slide each end of the 180° Joiner into the respective ends of the grates until flush.
- Align carefully and secure in place using a small mallet or screwdriver if needed.
- Seal with silicone (optional) if required for additional waterproofing in wet zones.
180° Joiners limitations:
- Not compatible with non-Lauxes grate systems
- Cannot be bent or customised – fixed 180° angle only
Safety precautions when using 180° Joiners:
- Personal Protective Equipment: Gloves may be worn to avoid sharp metal edges
- Ventilation: Not required – no adhesives or chemicals involved
- Handling: Safe for manual handling; lift with care to avoid scratching finishes
- First Aid: In case of cuts, treat with antiseptic and bandage; seek medical advice if necessary
180° Joiners can be used on the following substrates:
- aluminium – for direct integration with Lauxes grates
- Choosing a selection results in a full page refresh.