Filter
7 results
50
- 10
- 15
- 20
- 25
- 30
- 50
Featured
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Everflex VBS Water-based Epoxy PrimerUse Everflex VBS as a 2-part water-based epoxy primer and negative pressure vapour barrier for damp or green concrete. It withstands up to 25m (250 kPa) hydrostatic pressure and allows overcoating in 4-24 hours, preventing moisture-related system failures and accelerating project timelines.
- $440.44
- $440.44
- Unit price
- / per
-
Gripset Xpress Primer H2O Plus PrimerUse Gripset Xpress Primer H2O Plus for fast-drying vapour barrier priming on damp or green concrete and mineral surfaces, ready for overcoating in 1 hour. Its colour change indicator confirms readiness, preventing blistering and efflorescence.
- $389.93
- $389.93
- Unit price
- / per
-
Megapoxy HUse Megapoxy H for high-strength concrete and steel repairs, especially where potable water contact or wet conditions are present. Its AS/NZS 4020:2018 compliance and hydrophilic properties ensure performance and peace of mind in critical infrastructure applications.
- From $193.22
- From $193.22
- Unit price
- / per
-
Megapoxy HXUse Megapoxy HX for deep penetration into fine concrete cracks or porous substrates. Its extra low 200 cps viscosity ensures full repair, delivering a 140 MPa compressive strength with a 60-minute work time.
- From $203.94
- From $203.94
- Unit price
- / per
-
Megapoxy LVSUse Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.
- From $216.72
- From $216.72
- Unit price
- / per
-
RLA Moisture Seal PrimerVendor:RLAUse RLA Moisture Seal as a high-performance 2-part epoxy barrier against moisture and vapour. It withstands 2.5 bar of hydrostatic pressure and can be applied to damp or "green" concrete, preventing moisture-related failures under overlaid finishes.
- $459.03
- $459.03
- Unit price
- / per
-
GCP Epocote F100W Clear Epoxy PrimerGCP Epocote F100W is a clear, two-pack, water-based epoxy primer and sealer. Designed for priming damp or green concrete, it offers an exceptionally long pot-life and fast cure, ensuring a tough, chemically resistant bond for professional waterproofing membrane systems.
- From $445.10
- From $445.10
- Unit price
- / per



