-
RLA 2 Part Cementitious MembraneVendor:
RLA 2Part is a versatile, Class II flexible cementitious waterproofing membrane for wet areas, balconies, planter boxes, retaining walls and immersed applications such as pools and water features. It cures to a tough, durable finish with high adhesion and a tile-ready surface. Certified to AS 4858 and AS 4654.1, and AS 4020 potable-water approved.- $205.08
- $205.08
- Unit price
- per
-
Silcor 580Vendor:
Silcor 580 delivers Class III waterproofing for heavy-duty decks and roofs. This tough 2-part PU stretches >700% and cures fast. Mix 1:1 and seal it for good.- $573.42
- $573.42
- Unit price
- per
-
Megapoxy 154Vendor:
A high-performance, water-based epoxy primer and sealer for concrete and masonry. Engineered to penetrate and achieve superior adhesion on damp and green concrete, acting as a critical moisture barrier and accelerating project timelines.- $630.00
- $630.00
- Unit price
- per
-
Everflex VBSVendor:
Stop moisture failures. Primer VBS is a professional 2-part vapour barrier and primer. It creates a reliable seal, ensuring your flooring or coating job lasts.- $364.85
- $364.85
- Unit price
- per
-
Everflex WPMVendor:
Everflex WPM is a high-performance, elastomeric waterproof membrane designed for Class 3 under-tile applications. Reinforced with microfibres for strength and durability, it is ideal for wet areas, balconies, and decks. This water-based membrane is non-toxic, low-VOC, and forms a seamless, fully bonded barrier that remains flexible and doesn’t re-emulsify. Compliant with NCC, AS4858 and AS4654.1 standards, Everflex WPM provides long-lasting waterproof protection with easy water clean-up and excellent compatibility across substrates including concrete, timber, cement sheeting, and more.
- $143.75
- $143.75
- Unit price
- per
-
Everflex WPUVVendor:
Everflex WPUV is a premium-grade, Class 3 water-based polyurethane waterproof membrane engineered for exposed external and UV-affected areas. Designed for demanding conditions, it provides a flexible, seamless, and elastomeric barrier over concrete, masonry, cement sheet, and approved wet area surfaces. With excellent adhesion and high elongation, WPUV is ideal for roofs, balconies, planter boxes, retaining walls, and podium decks. The cured film is resistant to UV, weathering, ponding water, and microbial growth. Non-flammable and low in VOCs, it’s suitable for both residential and commercial applications where reliable long-term waterproofing is essential.
- $144.50
- $144.50
- Unit price
- per
-
Duram Azcothane ReoVendor:
Water-based, internally microfibre-reinforced waterproofing membrane for protected applications. Class III performance to AS 4654.1 and compliant with AS 4858. Single-pack, low VOC, seamless, suited to direct stick tile/render, easy water clean-up.- $150.35
- $150.35
- Unit price
- per
-
Duram S900Vendor:
Clear, high-pH siloxane sealer that penetrates porous masonry to form a sub-surface weatherproof barrier while allowing vapour diffusion. Suited to concrete, render, face brick, sandstone and porous pavers. Wet-on-wet saturation application; dries clear. Typical cure 12–24 h.
- $229.46
- $229.46
- Unit price
- per
-
Gripset 38FCVendor:
Fast-curing, fibre-reinforced elastomeric waterproof membrane for internal and external applications. Class III flexible (elongation >300%), high tensile strength, excellent crack-bridging, and early recoat time (1 hour). Suitable for under-tile and exposed systems.- From $83.33
- From $83.33
- Unit price
- per
-
Gripset 51Vendor:
Gripset 51 is a high-quality, water-based bituminous waterproofing membrane designed for long-term protection of structures exposed to continuous dampness and mild chemicals. It offers outstanding crack-bridging properties, adhesion to concrete/masonry, and durability in underground and external applications. Ideal for retaining walls, planter boxes, wet areas, and general substructure waterproofing.
- From $63.65
- From $63.65
- Unit price
- per
-
Gripset 2PVendor:
Gripset 2P is a two-component (liquid + powder) cementitious waterproofing membrane delivering toughness, flexibility and high adhesion. Fast to recoat in cool or humid conditions, it’s suitable for under-tile, immersed (pools/water features) and subterranean works, and forms a compatible base for renders, screeds and tile adhesives. Complies with AS4858/AS4654.1 and is certified to AS/NZS 4020 for potable water.
- $153.83
- $153.83
- Unit price
- per
-
Adheseal Roofers Flash 'N' PatchVendor:
Roofers Flash 'N' Patch is a high-performance hybrid acrylic flashing compound designed for long-lasting waterproofing of roof penetrations, gutters, damaged membranes, and more. Offering exceptional elasticity and UV stability, it maintains flexibility across harsh Australian weather extremes. With strong adhesion to common building substrates like Colorbond®, timber, and PVC, this paintable, non-hazardous compound is ideal for professional roofing and remedial applications.
- $151.69
- $151.69
- Unit price
- per
-
Gripset LSVendor:
Gripset LS is a hard-wearing, non-slip top coat designed for roofs, podiums, balconies, and walkways. Applied over Gripset base membranes, it delivers UV stability, weather resistance, and light foot-traffic durability without additional aggregate. Ideal for Australian conditions.
- $184.32
- $184.32
- Unit price
- per
-
Gripset P39Vendor:
Gripset P39 is a cold-applied, solvent-free rubber bitumen emulsion membrane for positive and negative pressure waterproofing. Designed for underground structures, retaining walls, planter boxes, and podium decks, P39 offers high adhesion to concrete, masonry, and primed timber. It resists ponding water, salts, and ground chemicals, remains flexible, and is safe for use in sensitive environments. Meets AS4654 for external above-ground membranes and AS4020 for potable water contact.
- $186.23
- $186.23
- Unit price
- per
-
Everflex Fire-FillVendor:
High-performance, intumescent acrylic fire-rated joint sealant for internal/external use. Tested to AS1530.4 & AS4072.1 with up to 4 hr FRL. Excellent UV/weather resistance, flexible, paintable, and easy to apply.
- From $9.92
- From $9.92
- Unit price
- per
-
X’traseal MS-608Vendor:
X’traseal MS-608 is a professional-grade MS polymer flooring adhesive designed for high-strength bonding of parquet, timber, and engineered wood to nearly all subfloors. It provides excellent flexibility, waterproofing, UV resistance, and sound dampening — with a long open time that suits both indoor and outdoor use. Odourless and free from solvents and isocyanates, it’s safe for enclosed areas and remains permanently elastic. Trusted by flooring contractors for its bond integrity and clean application.
- From $10.90
- From $10.90
- Unit price
- per
-
EverKrete 102Vendor:EverKreteEverKrete 102 is the high-performance resin binder at the core of the EverKrete rapid concrete repair system. This advanced, low-viscosity thermoset vinyl polymer is engineered for creating tough, durable repair mortars and overlays that cure in as little as 45 minutes, even in sub-zero temperatures. It provides exceptional penetration and a tenacious bond to concrete substrates for a permanent, high-strength repair.
- From $213.97
- From $213.97
- Unit price
- per
-
Everflex HVUVVendor:
Everflex HVUV is a single-component, microfibre-reinforced Class 3 waterproof membrane engineered for UV-exposed areas such as rooftop decks, balconies, and terraces. Compliant with AS4858 and AS4654.1, HVUV forms a seamless, durable barrier that resists re-emulsification, supports tile installations, and withstands light foot traffic. Suitable for both internal and external applications with low VOC and fast-drying properties.
- $144.50
- $144.50
- Unit price
- per
-
Everflex Aqua-BanVendor:
Everflex Aqua-Ban is a single-component, SBR-based, microfibre-reinforced Class III waterproofing membrane designed for under-tile applications. Fully compliant with AS4858 and AS4654.1, it forms a tough, seamless, and flexible barrier for wet areas including bathrooms, balconies, kitchens, and external decks. Its low VOC formula, rapid drying time, and high adhesion to building substrates make it ideal for both residential and commercial waterproofing systems.
- $114.72
- $114.72
- Unit price
- per
-
Duram 195Vendor:
Single-pack, liquid-applied, moisture-curing polyurethane Class III membrane for non-exposed waterproofing. Seamless, self-levelling, flexible, low VOC, with excellent chemical and hydrostatic resistance. Topcoat with Multithane ATC if exposed.
- $287.62
- $287.62
- Unit price
- per
-
Adheseal Showerseal SealerVendor:
Adheseal Showerseal is a clear, penetrating siloxane/silane sealer that creates a durable hydrophobic barrier in porous substrates. It's the ideal economic solution for stopping leaks in tiled showers and balconies without lifting tiles, while remaining breathable and preserving the surface's look.
- $65.00
- $65.00
- Unit price
- per
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
What's Popular
Vendor:
Adheseal PU-15 is a professional-grade, low modulus polyurethane joint sealant designed for Australian trade professionals. It delivers exceptional flexibility with a movement capability of ±25%, ensuring a durable, weatherproof, and mould-resistant seal for expansion joints, window perimeters, and precast panels. This single-component, moisture-curing formula is easy to apply and tool, providing a reliable, paintable finish that you can stand behind.
- From $11.10
- From $11.10
- Unit price
- / per
Vendor:
Adheseal PU-25FC is the trade's choice for a fast-curing, paintable PU sealant. ±25% movement & AS 4020 certified for zero doubt.
- From $10.30
- From $10.30
- Unit price
- / per
Vendor:
Adheseal PU-50FC is a high-strength, fast-curing polyurethane adhesive sealant engineered for the most demanding applications. With an exceptional Shore A hardness of 50, it serves as a formidable anti-pick sealant for high-security areas like prisons and schools. Its powerful bond strength and permanent flexibility make it the professional choice for structural bonding in truck bodies, marine manufacturing, and construction where vibration and high stress are constant.
- From $13.85
- From $13.85
- Unit price
- / per
UV Stable Membranes
Use UV Stable Membrane for: Protecting surfaces from UV damage, water ingress, and environmental degradation in outdoor applications. UV stable membranes are engineered to provide long-lasting protection against ultraviolet radiation, moisture, and environmental factors. These membranes are ideal for roofing, waterproofing, and cladding applications, ensuring durability and extending the lifespan...
Use UV Stable Membrane for: Protecting surfaces from UV damage, water ingress, and environmental degradation in outdoor applications.
UV stable membranes are engineered to provide long-lasting protection against ultraviolet radiation, moisture, and environmental factors. These membranes are ideal for roofing, waterproofing, and cladding applications, ensuring durability and extending the lifespan of structures. Designed to withstand harsh Australian conditions, UV stable membranes offer reliable performance and maintain their integrity over time.
Key Features
- High UV resistance
- Waterproof and weather-resistant
- Durable and long-lasting
- Flexible and easy to install
- Excellent adhesion to various substrates
- Resistant to mould and mildew
- Maintains structural integrity under thermal stress
Trade Professional Information
- Required Tools: Membrane rollers, seam rollers, cutting tools, adhesive applicators, heat guns (for certain types), measuring tapes, safety glasses, gloves.
- Trade-Specific Tips: Ensure the substrate is clean, dry, and free from sharp edges. Overlap membrane sheets according to manufacturer specifications. Use seam rollers to ensure proper adhesion. Apply adhesives evenly and consistently. Allow sufficient curing time. Inspect for air pockets and ensure proper ventilation.
-
Common Issues and Solutions:
- Issue: Membrane peeling or blistering. Solution: Ensure proper surface preparation and adhesive application. Verify substrate compatibility.
- Issue: Seam failures. Solution: Use seam rollers to ensure adequate adhesion. Follow manufacturer's specifications for overlap.
- Issue: UV degradation over time. Solution: Select high-quality, UV-resistant membranes and ensure proper installation.
Frequently Asked Questions About UV Stable Membrane
- What are the benefits of using a UV stable membrane? UV stable membranes protect against UV damage, water ingress, and environmental degradation, extending the lifespan of structures.
- Where can UV stable membranes be used? UV stable membranes are suitable for roofing, waterproofing, cladding, and other outdoor applications.
- How do I prepare the surface before installing a UV stable membrane? Ensure the surface is clean, dry, and free from sharp edges and debris.
- What type of adhesive should I use with a UV stable membrane? Use an adhesive recommended by the membrane manufacturer for optimal adhesion and compatibility.
- How long does a UV stable membrane last? The lifespan of a UV stable membrane depends on the product quality and environmental conditions. Refer to the manufacturer's specifications.
- Can UV stable membranes be used in all weather conditions? Yes, high-quality UV stable membranes are designed to withstand various weather conditions, including extreme temperatures and UV exposure.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.