Couldn't load pickup availability
Flat-rate shipping $17.95 + GST (metro and standard zones). Excludes remote/regional/high-cost postcodes and certain items (DG, oversized, long-length, or bagged products 15 kg+). If your order includes any of these, we will contact you to arrange additional freight charges. Online purchases only.
A leaking shower tray or external tiled area doesn't always demand demolition. When water finds its way through porous grout or substrate, you need a way to stop it without lifting a single tile. Adheseal Showerseal penetrates deep, forming a clear, internal hydrophobic barrier. It inhibits water ingress without altering the surface appearance or requiring disruptive repair work.
Adheseal Showerseal provides an economic alternative to traditional, invasive leak repair. It is a clear, deep-penetrating siloxane/silane solution engineered to create an internal hydrophobic barrier within porous substrates. This stops leaks from the surface inward, without the need for demolition or tile removal. It also resists high pH conditions found in new concrete and lime-based mortars, ensuring durability. This penetrative action makes porous surfaces hydrophobic, allowing the substrate to 'breathe' while preventing water damage and reducing efflorescence.
Prepare the surface by ensuring it is structurally sound, clean, and completely dry. Remove any loose or cracked grout, mortar, or existing sealants, then allow the substrate to dry thoroughly. The drier the surface, the better the penetration. Apply Showerseal evenly by brush, roller, or spray, ensuring thorough saturation. For walls, start at the top and work downwards, letting the liquid run evenly. Allow the product to cure for 24 to 48 hours before using the treated area. After Showerseal has fully dried, replace any removed sealants using a product like Adheseal S100 Sanitary Silicone Sealant to complete the waterproof system at movement joints and corners. Clean tools and skin with appropriate solvents or Adheseal Hand Wipes.
Yes, Adheseal Showerseal penetrates porous surfaces to form a hydrophobic barrier, inhibiting water ingress without requiring tile removal. This offers an economic solution to sealing leaks in tiled areas.
No, Showerseal dries clear with no or low gloss, maintaining the original appearance of the surface. It works by creating a barrier inside the substrate, not on top of it.
No, Adheseal Showerseal is a penetrative sealer, not a filler. It cannot bridge existing cracks or fill voids. Loose or cracked grout should be replaced before application.
The shower recess can typically be used 24 to 48 hours after applying the final coat. This allows sufficient time for the product to fully cure and establish the hydrophobic barrier.
| Application | Key benefit | Primary trades |
|---|---|---|
| Treating leaking tiled showers and wet areas | Seals water leaks by creating an internal hydrophobic barrier without the cost and disruption of tile removal. | Plumbers, Tilers, Renovators |
| Protecting external concrete, render, brick, and block walls | Makes porous surfaces hydrophobic, inhibiting water ingress and reducing the risk of efflorescence. | Builders, Landscapers, Property Maintenance |
| Sealing porous pavers and stone | Provides long-lasting water protection without altering the surface appearance or creating a gloss finish. | Landscapers, Tilers |
| Hydrophobic treatment for porous FC sheeting and painted surfaces | Inhibits water absorption while allowing the substrate to breathe, extending surface life. | Painters, Property Maintenance |
Ensure the surface is completely clean, dry, and sound. For showers, stop use for 48 hours prior. Remove any loose grout, oils, or soap scum. Old sealants must be removed and the joint cleaned to ensure proper penetration.
Apply using a brush, roller, or low-pressure sprayer. It is essential to fully saturate the substrate.
Apply 3 soaking coats, focusing on the grout lines. 250ml to 500ml is typically sufficient for a standard shower.
Start at the top and work down, allowing the liquid to run evenly down the wall to ensure complete saturation.
Allow the final coat to cure. The area can typically return to service after 24 to 48 hours. Any new sealant can be applied after the Showerseal has fully dried. Immediately wipe any liquid product off glass or glazed surfaces to prevent etching.
This material is classified as a Dangerous Good, Class 3, due to its flammability. Always ensure adequate ventilation and eliminate ignition sources when handling.
Wear rubber boots, overalls, gloves, safety glasses, and a respirator. If inhalation risk exists, use an organic vapour/particulate respirator meeting AS/NZS 1715 and AS/NZS 1716 standards.
Use only in well-ventilated areas, preferably outdoors. Ensure adequate ventilation to maintain air concentrations below exposure standards. Avoid working in confined spaces without checking the atmosphere.
Store in a cool, dry place, away from all ignition sources. Keep containers securely sealed and locked up. Plastic containers must be approved for flammable liquids. Ventilate sealed containers periodically to prevent pressure build-up. Shelf life is up to 12 months in unopened containers. Dispose of contents and containers according to local regulations.
Proper substrate preparation is critical for Adheseal Showerseal to penetrate effectively and form a lasting hydrophobic barrier.
Surface prep: Ensure surfaces are structurally sound, stable, dry, and clean. Remove all dust, loose material, oils, grease, and other contaminants that may prevent absorption. Concrete must be cured for at least 28 days. Loose or cracked grout and old sealants must be replaced and allowed to dry completely before application.
Primer: Not required. Adheseal Showerseal is designed to penetrate directly into porous substrates.
Surface prep: Surface must be dry, clean, and free of flaking or friable paint. Ensure the painted surface is porous enough to allow penetration. Conduct a test area to confirm absorption and compatibility.
Primer: Not required. Adheseal Showerseal penetrates suitable painted surfaces.
| Property | Value |
|---|---|
| General Coverage Rate | 5 m²/L |
| Coverage for Standard Shower Recess | 250-500mL (3 soaking coats) |
| Touch Dry (per coat) | 2-4 hours |
| Set (per coat) | 4-8 hours |
| Full Cure (Shower Use) | 24-48 hours after final coat |
| Service Temperature | 10°C to 50°C |
| Application Temperature | 5°C to 30°C |
| Colour | Clear |
| Packaging | 3 Lt, 15 Lt pails |
| Shelf Life | Up to 12 months in unopened containers |
| Dangerous Goods Class | 3 |
| Packing Group | III |
| UN Number | UN1300 |
| Hazchem Code | 3Y |
| UN Proper Shipping Name | TURPENTINE SUBSTITUTE |
Here are some common examples on where Adheseal Showerseal Sealer used by our customers.
Waterproofing
When existing tiled showers leak through porous grout or tile beds, avoiding costly demolition.
Deep-penetrating silane/siloxane creates an internal hydrophobic barrier, stopping leaks without costly, disruptive tile removal or altering appearance.
Masonry
Protecting porous concrete, render, brick, or stone surfaces from water ingress and efflorescence build-up.
Forms an invisible, internal hydrophobic barrier, preventing water damage and reducing salt spotting without altering the surface aesthetic.
Waterproofing
Stopping water leaks from external tiled decks, terraces, or balconies without removing existing tiles.
Invisibly penetrates porous grout and tile beds, forming an internal water barrier to seal leaks and protect structural integrity.
Need more information about this product? Hit the button below and reach out to one of our experts now.
Thanks for subscribing!
This email has been registered!
| Product | SKU | Description | Collection | Availability | Product Type | Other Details |
|---|
| Colour: |
|
| RAL Code: | |
| Finish: |
