SILCOR® 560 HB

One-part charcoal grey polyurethane waterproofing membrane
Vendor: GCP
SKU: SILCOR560HB/18.9
Availability: In Stock
$196.79
$196.79

Shipping & Delivery

$15.95 shipping on all orders nationwide for most products

SILCOR® 560 HB

Vendor: GCP

SILCOR® 560 HB

$196.79

Vendor: GCP

SILCOR® 560 HB

$196.79

A one-part, liquid applied, high solids, charcoal grey colour polyurethane (PU) waterproofing membrane. It is formulated for simple, high build application to horizontal and vertical substrates. After application, the product cures through reaction with ambient humidity, forming a flexible, elastomeric membrane.
SILCOR 560® HB is a certified Class III membrane and is compliant to AS4858:2004: Wet Area Membranes, when applied in accordance to AS3740:2010 waterproofing Wet Areas in Residential Buildings. SILCOR 560 HB is tested to AS4654.1 to ensure compliance with the NCC for external waterproofing in Australia.

Product Characteristics

  • Colour: Charcoal
  • Size: 22 KG Pail

Uses

New and remedial waterproofing of:

  • External Below Ground (tanking) Lift pit walls, retaining walls, basement walls, non-potable water storage tanks
  • External Above Ground (non-exposed/covered) Balconies, podiums, landscaped decks, planter boxes, roof decks, window & door reveals
  • Internal Wet Areas Bathroom floors, shower trays, laundries, toilets, foyers

Benefits

  • Seamless liquid applied and monolithic, eliminating vulnerable joins, seams and laps Fully Bonded no water tracking between membrane and substrate
  • Simple Application one-part, humidity cured. Applied by roller or brush to horizontal or vertical surfaces Cold Applied no flame or heat required for application
  • Low VOC reduced issues on site
  • Flexible long life elastomeric membrane. Accommodates normal structural movement and bridges non-structural concrete shrinkage cracks without requiring full membrane reinforcing
  • Polyurethane Chemistry free from bitumen or tar and will not bleed or stain External Above Ground meet the requirements of Australian Standard AS 4654-2012 
  • Internal Wet Areas meet the requirements ofAustralian Standard AS 3740-2010

Uses

New and remedial waterproofing of:

  • External Below Ground (tanking) Lift pit walls, retaining walls, basement walls, non-potable water storage tanks
  • External Above Ground (non-exposed/covered) Balconies, podiums, landscaped decks, planter boxes, roof decks, window & door reveals
  • Internal Wet Areas Bathroom floors, shower trays, laundries, toilets, foyers

Benefits

  • Seamless liquid applied and monolithic, eliminating vulnerable joins, seams and laps Fully Bonded no water tracking between membrane and substrate
  • Simple Application one-part, humidity cured. Applied by roller or brush to horizontal or vertical surfaces Cold Applied no flame or heat required for application
  • Low VOC reduced issues on site
  • Flexible long life elastomeric membrane. Accommodates normal structural movement and bridges non-structural concrete shrinkage cracks without requiring full membrane reinforcing
  • Polyurethane Chemistry free from bitumen or tar and will not bleed or stain External Above Ground meet the requirements of Australian Standard AS 4654-2012 
  • Internal Wet Areas meet the requirements ofAustralian Standard AS 3740-2010

Alternative Products

Need Help with SILCOR® 560 HB?

Need more information about this product? Hit the button below and reach out to one of our experts now.

Recently Viewed Products