When the job demands the power of an acid but not the risk, SynSafe Acid steps in. Forget fuming, corrosive liquids and the constant threat of skin burns or respiratory irritation. This product delivers powerful descaling, etching, and cleaning performance, all while being non-toxic, non-fuming, and safe for user contact. It’s the right tool for demanding tasks where safety and environmental responsibility are non-negotiable.
SynSafe Acid provides a fundamental shift in how contractors approach acid-based tasks. Traditional acids carry inherent risks: corrosive burns, toxic fumes, and environmental damage. This product offers a direct, safer replacement. It achieves the same powerful results for tasks like concrete etching or rust removal, but without the significant health and safety hazards. Its formulation uses ingredients from the EPA's Design for the Environment (DfE) safe chemical list, ensuring both user protection and environmental compliance.
SynSafe Acid functions with a pH level of <1, delivering the aggressive action of a strong acid for descaling and etching. However, unlike conventional strong acids, it contains 0 VOCs and is non-fuming, eliminating respiratory hazards during application. Its 100% solubility ensures complete dispersion and efficient cleaning, leaving no residue. With an initial freezing point of -31.6°C, it maintains workability and storage stability across a broad range of site conditions, making it reliable year-round.
Handling SynSafe Acid removes much of the stress associated with corrosive chemicals. It is non-fuming and will not cause acid burns on direct skin contact, making application significantly safer. This product can be used at full strength for tough jobs or diluted for lighter cleaning, offering versatility without compromising effectiveness. For pumping, use only manufacturer-approved hose couplings and fittings made from 316 stainless steel, polypropylene, or polyethylene. Always test on a small, inconspicuous area first to confirm compatibility with the specific material.
SynSafe Acid's multi-functional design makes it invaluable across several trades:
Yes, SynSafe Acid is specifically designed for cleaning and etching brick and masonry. It is non-corrosive and biodegradable, allowing for safe removal of mortar residue and surface contaminants.
The product has low odour and contains no VOCs, making it suitable for enclosed or poorly ventilated spaces. However, general ventilation is always recommended for optimal working conditions.
Use equipment made from 316 stainless steel, polypropylene, or polyethylene. Avoid aluminium fittings, as they may cause discolouration or etching, and always conduct a small test before full application.
It remains stable in temperatures up to 100°C due to its high boiling point. This makes it suitable for use across Australia's varied climates, provided it's stored out of direct sunlight.
| Application | Key benefit | Primary trades |
|---|---|---|
| Concrete etching before sealing or coating | Safer alternative to hydrochloric acid without fuming or skin burn risk. | Concretors, landscapers |
| Rust removal on stainless steel and tools | Effective rust and degreasing action without harsh fumes or pitting. | Maintenance, fabricators |
| Grout haze removal | Leaves tiled surfaces clean and streak-free. | Tilers |
| Brick and masonry cleaning | Removes slurry, mortar, and residue easily without substrate damage. | Builders, bricklayers |
| Weed killing in pathways and paving joints | Organic and non-carcinogenic formulation for targeted weed control. | Landscapers, councils |
Safety glasses and chemical-resistant gloves are recommended, especially for prolonged use.
Use in a well-ventilated area. While the product has low fumes and is suitable for enclosed environments, good ventilation improves safety.
Store the product sealed and away from direct sunlight. Use only approved fittings made of 316 stainless steel, polypropylene, or polyethylene for pumping or transfer to maintain product integrity and safety.
Proper substrate preparation is critical for effective cleaning and etching, ensuring the product performs as specified.
Surface prep: Clean surface of loose debris. Apply to etch before sealing or coating.
Primer: Not required; SynSafe Acid functions as the etching agent.
Surface prep: Remove large debris. Apply to safely remove mortar, dirt, grime, and slurry.
Primer: Not required.
Surface prep: Clean surface. Apply for rust removal and degreasing.
Primer: Not required.
Surface prep: Ensure equipment is clean before use.
Primer: Not applicable; these are suitable materials for transfer and storage equipment.
| Property | Value |
|---|---|
| Base Chemistry | Organic Compound |
| pH | <1 |
| Classification | Triple Zero Hazardous Index Score |
| Certifications | CleanIngredient EPA Approved |
| Standards | Non-toxic, Non-fuming, 100% Biodegradable, No VOCs, Biodegrades in Less Than 10 Days |
| Temperature Stability | Up to 100°C |
| Packaging | 1 Litre, 5 Litre, 20 Litre |
Here are some common examples on where BAT Eco SynSafe Acid used by our customers.
