11
Trade quote
Custom pricing available
Tell us what you need and we'll come back with a quote.
Custom trade quote
Share your quantity and project details for a tailored quote.
Attention: This product is classified as a dangerous good. Shipping costs will be adjusted accordingly.
Everbond Ultra Clear Brush Contact is a high-performance polychloroprene contact adhesive specifically engineered for automotive upholstery and transport interior manufacturing where invisible bond lines are critical. This thixotropic liquid provides high initial strength and rapid 3-5 minute flash-off times, effectively securing headliners, seat brackets, and side wall coverings against high spring-back forces.
When used with the 2P additive, the chemistry maintains bond integrity in environments exceeding 120°C, preventing failure in high-heat vehicle cabins. To ensure a professional finish and avoid surface blistering, technicians must Degrease substrates and ensure ambient temperatures remain above 10°C to prevent moisture condensation.
Applying an even coating via brush or Trowel is essential to prevent solvent entrapment, which can occur if the adhesive is allowed to pool or if surfaces are joined before the material is touch-dry.
Frequently Asked Questions About Everbond Ultra Clear Brush Contact Adhesive
Q: Can this adhesive be used on vehicle interiors exposed to heat?
A: Yes. With its high-temperature resistance exceeding 120°C (when used with 2P additive), it’s ideal for automotive interiors exposed to direct sunlight and heat cycling.
Q: Will it bleed through fabric or porous substrates?
A: It may bleed through open-weave fabrics. In such cases, use Adheseal Spray Contact for a controlled, surface-only application without soak-through.
Q: How long should I wait before pressing the substrates together?
A: Wait until the surface is touch-dry—typically 3–5 minutes—before applying pressure. Early bonding may cause solvent entrapment and bond failure.
Q: What is the best method to clean tools after use?
A: Use acetone to clean tools and surfaces immediately after application. Allowing the adhesive to dry will make removal more difficult.
Applications & Benefits
| Application / Use Case | Key Benefit | Primary Trades |
|---|---|---|
| Upholstery of automotive interiors | High tack and clarity under temperature stress | Upholsterers, Auto Trimmers |
| Laminating cloth-backed vinyl to cabinetry | Invisible bond line with strong grip | Cabinetmakers, Joiners |
| Fabrication of neoprene drink coolers | Fast drying, flexible adhesive for curved surfaces | Manufacturers, Custom Printers |
| Adhering foam to composite panels | Prevents delamination under rebound stress | Fitout Contractors, OEM Assemblers |
Applying Everbond Ultra Clear Brush Contact Adhesive: Protocols & Best Practices
General Application Steps:- Preparation: Ensure the substrate is clean, dry, and prepared as per the Adhesion & Preparation Guide. Avoid porous substrates unless tested or use spray contact.
- Application: Apply evenly with brush or trowel to both surfaces. Do not pool adhesive.
- Tooling & Finishing: Wait 3–5 minutes for flash-off. Then bring surfaces together with firm, even pressure.
- Curing: Bond forms immediately under pressure. Protect from stress, heat, or water during initial set period.
For Upholsterers: Automotive Trim Application
The Engineering Challenge: Creating invisible, heat-resistant bonds on flexible interior surfaces.
The System-Based Solution with Everbond Ultra Clear: Thin clear layer prevents delamination and maintains clean lines.
Best Practice Note: Use mechanical rollers for even pressure distribution.
For Cabinetmakers: Edge Bonding Veneers
The Engineering Challenge: Laminating detailed trims without bleed-through or warping.
The System-Based Solution with Everbond Ultra Clear: Transparent finish and consistent tack enhance visual presentation.
Best Practice Note: Mask surrounding surfaces before application to avoid overspill.
Limitations & Safety
Product limitations and safety information
Limitations:
- Not suitable for bonding below 10°C due to condensation risk.
- Avoid pooling of adhesive to prevent solvent entrapment and bond failure.
- Not designed for structural load-bearing applications.
Safety & Handling:
- PPE: Gloves and eye protection recommended.
- Ventilation: Ensure adequate ventilation during use.
- Handling: Avoid prolonged skin contact. Use in well-ventilated area away from flame or spark.
- First Aid: In case of contact, rinse skin/eyes with water. Seek medical attention if irritation persists.
Everbond Ultra Clear Brush Contact Adhesive Adhesion & Preparation Guide
-
Substrate preparation guidelines
- Timber / MDF: Clean and dry. Remove dust and loose particles – Primer: Not required.
- Rubber / Neoprene: Degrease and abrade lightly – Primer: Not required.
- Vinyl / Fabric: Test for bleed-through. Avoid pooling – Primer: Use spray adhesive on porous weaves.
- Concrete: Dry and dust-free – Primer: Not required.
- Glass / Metal: Degreased and dry – Primer: Not required.
- Choosing a selection results in a full page refresh.