11
Trade quote
Custom pricing available
Tell us what you need and we'll come back with a quote.
Custom trade quote
Share your quantity and project details for a tailored quote.
Attention: This product is classified as a dangerous good. Shipping costs will be adjusted accordingly.
Everbond SP-230 is a one-component polychloroprene spray contact adhesive engineered for the high-tension demands of automotive upholstery and commercial shopfitting. This high-solids formula provides a rapid 3–5 minute flash-off time and superior resistance to high spring-back forces, ensuring that tensioned trims and edging profiles remain permanently contoured without delamination.
Its high heat-resistant properties prevent bond failure in extreme cabin temperatures, while the sprayable consistency allows for even surface film build-up on porous fabrics without substrate bleed-through.
Frequently Asked Questions About Everbond SP-230 Spray Contact
Q: Can this adhesive handle high temperatures in vehicle interiors?
A: Yes, Everbond SP-230 offers excellent heat resistance, making it ideal for bonding trims, panels, and upholstery in vehicle interiors exposed to direct sun and cabin heat.
Q: How long do I have to wait before pressing the substrates together?
A: Wait 3–5 minutes or until the adhesive is touch dry. Pressing too early can trap solvent, weakening the bond or causing blistering.
Q: Is it suitable for foam-to-metal or foam-to-vinyl bonding?
A: Absolutely. It’s specifically engineered for foam fabrication and provides strong adhesion to both rigid and flexible substrates like metal and vinyl.
Q: What’s the best way to avoid over-application?
A: Use a fine spray pattern and apply in thin, even coats to both surfaces. Avoid heavy build-up or pooling, which can lead to solvent entrapment.
Applications & Benefits
| Application / Use Case | Key Benefit | Primary Trades |
|---|---|---|
| Foam Fabrication | Secure bonding with minimal overspray and quick handling time | Upholsterers, Automotive Fitters |
| Laminate Installation | Strong tack allows vertical or overhead application | Cabinetmakers, Shopfitters |
| Transport Fit-Outs | Heat resistance prevents bond failure in high-temp environments | Vehicle Interior Specialists |
| Upholstery Repair | Adheres to flexible fabrics without bleed-through | Furniture Upholsterers |
Applying Everbond SP-230 Spray Contact: Protocols & Best Practices
General Application Steps:- Preparation: Ensure both substrates are clean, dry, and free from contaminants.
- Application: Spray or brush adhesive onto both surfaces. Wait 3–5 minutes for tack to develop.
- Bonding: Align and press surfaces firmly together using even pressure. Avoid repositioning.
- Final Curing: Protect bonded assembly from moisture or heat during initial set time.
Limitations & Safety
Product limitations and safety information
Limitations:
- Do not use in conditions below 10°C — risk of condensation reducing bond quality
- Avoid excessive application; pooling leads to solvent entrapment and bond failure
- Must be used shortly after opening to avoid material degradation
Safety & Handling:
- PPE: Gloves, protective clothing, safety goggles, and respirator
- Ventilation: Use in a well-ventilated area only
- Handling: Avoid skin contact and inhalation of vapours
- First Aid: In case of skin or eye contact, rinse thoroughly with water. Seek medical attention if irritation persists
Everbond SP-230 Spray Contact Adhesion & Preparation Guide
-
Substrate preparation guidelines
- Timber & MDF: Clean and dry surface, remove dust — Primer: No primer required.
- Plastic Laminates & Vinyl: Wipe with solvent to remove oils — Primer: No primer required.
- Foam & Fabric: Ensure dry and lint-free — Primer: No primer required.
- Concrete: Dry, clean, and stable surface — Primer: No primer required, test for compatibility.
- Metal Sheets: Degreased and lightly abraded — Primer: No primer required.
- Choosing a selection results in a full page refresh.