11
Trade quote
Custom pricing available
Tell us what you need and we'll come back with a quote.
Custom trade quote
Share your quantity and project details for a tailored quote.
Attention: This product is classified as a dangerous good. Shipping costs will be adjusted accordingly.
Adheseal Methylated Spirits 95% is a high-purity denatured alcohol solvent engineered for professional substrate preparation and adhesive thinning in commercial glazing and industrial assembly. This 95% ethanol formula provides rapid flash-off and leaves zero film, effectively stripping oils and factory residues from non-porous surfaces like glass and stainless steel to prevent costly delamination.
The water-thin consistency and 0.9 specific gravity ensure the solvent penetrates tight gaps for comprehensive cleaning, maintaining tool integrity and preparing surfaces for permanent sealant application.
Frequently Asked Questions About Methylated Spirits 95%
Q: Can I use this to clean substrates before applying a sealant?
A: Yes, Methylated Spirits 95% is ideal for removing surface contaminants before sealant application. It evaporates quickly, leaving no residue that could impair adhesion.
Q: Is it safe to use on painted or plastic surfaces?
A: Always test on an inconspicuous area first. Some painted or plastic surfaces may be sensitive to ethanol and could discolour or craze upon contact.
Q: What’s the best way to apply Methylated Spirits 95% on surfaces?
A: Use a lint-free cloth or solvent-safe spray bottle. Wipe in one direction to lift contaminants, then allow full evaporation before proceeding with adhesive or sealant.
Q: Can I thin adhesives with this product?
A: Yes, it’s commonly used as a thinner for compatible adhesives. Check the adhesive's TDS for specific recommendations before mixing.
Applications & Benefits
| Application / Use Case | Key Benefit | Primary Trades |
|---|---|---|
| Surface cleaning before bonding | Promotes strong adhesion by removing contaminants | Glaziers, Waterproofers, Builders |
| Adhesive thinning | Improves spreadability and flow of compatible adhesives | Fabricators, Joiners |
| Tool cleaning | Prevents material build-up and prolongs tool life | All Trades |
Applying Methylated Spirits 95%: Protocols & Best Practices
General Application Steps:- Preparation: Ensure the surface is non-porous and free of sensitive finishes. Wear PPE and ventilate the area.
- Application: Apply via spray or cloth to the surface or tool to be cleaned. Avoid pooling or saturation.
- Drying: Let the product evaporate fully before proceeding with adhesives or sealants.
Limitations & Safety
Product limitations and safety information
Limitations:
- Not suitable for use on porous or sensitive materials
- Should not be used near open flames due to flammability
- Evaporation may cause condensation in enclosed areas
Safety & Handling:
- PPE: Impervious gloves, safety glasses, protective clothing
- Ventilation: Use in well-ventilated spaces only
- Handling: Avoid skin and eye contact. Keep container sealed
- First Aid: Eye contact – rinse for 15 minutes. Inhalation – move to fresh air. Ingestion – do not induce vomiting, seek medical advice.
Methylated Spirits 95% Adhesion & Preparation Guide
-
Substrate preparation guidelines
- Glass & Metal: Wipe clean using a lint-free cloth and Methylated Spirits. Allow complete evaporation. – Primer: No primer required.
- Non-porous plastics: Test first in an inconspicuous area. May not be compatible with some finishes. – Primer: No primer required (if suitable).
- Tools & Equipment: Clean thoroughly with product and allow to air dry. – Primer: Not applicable.
- Choosing a selection results in a full page refresh.