11
Trade pricing
Better rates for larger orders
Send your quantity and we'll confirm the best trade price.
Standard
$6.24
Bulk
$5.62
Save
$0.62
Corflute Protection Board is a high-strength corrugated polypropylene shield designed to protect waterproofing membranes from mechanical damage during backfilling and site fitouts. This 2mm polyolefin-based thermoplastic provides a puncture-resistant barrier that cushions against aggregate impact, ensuring maintained watertight integrity and delamination prevention.
Using these 1805mm x 1210mm sheets streamlines workflow on large commercial footprints while eliminating the risk of membrane failure caused by site traffic or dropped equipment. Contractors must verify that the membrane is fully cured before board placement to prevent damage to liquid-applied coatings.
Frequently Asked Questions About Corflute Protection Board (1805mm x 1210mm x 2mm)
Q: How is the Corflute Protection Board applied?
A: Simply place the board directly over the waterproofing membrane before backfilling or applying pressure. Use tape or adhesive for vertical applications to keep it in place.
Q: How durable is the board under heavy construction conditions?
A: The 2mm corrugated polypropylene structure provides high resistance to puncture, impact, and abrasion—ideal for heavy-duty trade environments.
Q: Is this product compatible with all waterproofing membranes?
A: Yes, it’s chemically inert and non-reactive, making it suitable for use with most sheet and liquid-applied waterproofing membranes.
Q: What should I do if the board bends or warps during storage?
A: Lay the board flat in a shaded area with weight on top to restore shape. Avoid storing near heat sources to prevent warping in future.
Q: How should I safely dispose of damaged boards?
A: Dispose of in general industrial waste. Corflute is recyclable under many local council guidelines; check for local recycling options.
Use Corflute Protection Board (1805mm x 1210mm x 2mm) for:
- Temporary protection of waterproofing membranes during construction
- Shielding membranes from punctures during backfilling
- Floor and wall protection during site fitouts and traffic
- Slab preparation and joint detailing protection
Why Use Corflute Protection Board (1805mm x 1210mm x 2mm):
- Minimises membrane damage and reapplication costs
- Improves job site efficiency with easy handling and coverage
- Durable and reusable—eco-conscious alternative to disposable options
How to apply Corflute Protection Board (1805mm x 1210mm x 2mm):
- Ensure membrane is fully cured before applying protection board
- Lay sheets flat over membrane surface, overlapping edges slightly
- Use compatible adhesive tape or spot fix with sealant if vertical application is required
- Cut to fit corners or penetrations using a utility knife
- Proceed with backfilling or further site works as needed
Corflute Protection Board (1805mm x 1210mm x 2mm) limitations:
- Not suitable as a long-term UV-exposed barrier
- Should not be used as a structural load-bearing surface
- May warp under excessive heat if not stored flat
Safety precautions when using Corflute Protection Board (1805mm x 1210mm x 2mm):
- Personal Protective Equipment: Cut-resistant gloves recommended when trimming
- Ventilation: Not required—material is non-toxic
- Handling: Carry flat to avoid bending; edges can be sharp when cut
- Store away from open flame or direct sunlight to prevent degradation
Corflute Protection Board (1805mm x 1210mm x 2mm) can be used on the following substrates:
- Liquid-applied waterproofing membranes (polyurethane, acrylic, bitumen)
- Sheet membranes (torch-on, PVC, TPO)
- Concrete surfaces (cured, primed)
- Timber formwork (for temporary protection)
- Choosing a selection results in a full page refresh.