A fixed 19mm nozzle for sausage guns, in a 10-pack. Wide beads for expansion joints and masonry sealing need a nozzle that holds its aperture: this one extrudes a steady 19mm bead without the stutter that comes from rough-bored or loose-fitting nozzles.
The smooth bore keeps extrusion pressure even, and the secure fit stops back-pressure leaks at the gun junction. One nozzle per joint run keeps beads consistent; ten in the box covers the job.
Frequently Asked Questions About 19mm Sausage Gun Nozzle
Q: How do I clean the 19mm Sausage Gun Nozzle?
A: Remove the nozzle from the sausage gun and wipe away excess sealant with a clean cloth. Use a suitable solvent to remove any remaining residue. Ensure the nozzle is completely dry before reuse.
Q: Is the 19mm Sausage Gun Nozzle compatible with all sausage guns?
A: It is designed to be compatible with most standard sausage guns. However, always check the compatibility of the nozzle with your specific sausage gun model to ensure a secure fit.
Q: What type of sealants can I use with this nozzle?
A: This nozzle is compatible with a wide range of sealants and adhesives dispensed from sausage cartridges, including silicone, polyurethane, and acrylic-based products.
Q: How do I prevent sealant from hardening inside the nozzle?
A: Clean the nozzle immediately after use. If you must stop for a short period of time while using the product, extrude a small amount of sealant past the tip of the nozzle, and allow to harden. Then before restarting, pull the hardened plug of sealant from the tip. For long term storage, cleaning is the best method.
19mm Sausage Gun Nozzle can be used on the following substrates:
- Concrete (for joint sealing)
- Tile (for grouting and sealing)
- Metal (for weatherproofing)
- Wood (for joint and gap filling)
Note: Always ensure the sealant used is compatible with the substrate for optimal adhesion.