100mm CP Clearout Square Grate

Why Choose 100mm CP Clearout Square Grate

Use 100mm CP Clearout Square Grate for reliable floor drainage in high-traffic commercial and residential wet areas where a secure, tool-free entry to standard 100mm outlets is required.

100mm CP Clearout Square Grate Common Uses

This grate is selected when a flush, low-profile drainage solution must integrate with finished flooring and meet AS 3740 compliance in wet areas.

• Wet areas in commercial and residential buildings where floor finishes must remain continuous.
• Retrofit projects requiring access to existing 100mm standard floor drains without mechanical fasteners.

Where 100mm CP Clearout Square Grate Performs Best

Performs reliably on rigid, stable substrates with minimal deflection, where temperature remains between 5°C and 40°C and the grate remains protected from sustained dynamic point loads.

Coverage, Skin Time & Cure

Yield and coverage are defined by the 100mm square configuration and 100mm outlet compatibility, allowing one unit to service a standard drain location with minimal on-site trimming.

• Skin time begins once the Megaflex base is seated; avoid heavy service loading until the adhesive or surrounding seal reaches handling strength.
• Cure to full structural performance is reached after sustained service conditions have stabilized bonded interfaces, typically following standard adhesive or sealant cure cycles per job specifics.

Surface Prep & Application

Prepare a clean, dry, and level substrate free of debris and contamination to ensure a robust friction fit and long-term moisture protection.

1. Clean the drain opening and remove any old sealant or debris.
2. Verify the outlet is a standard 100mm pipe and the surrounding slab is sound.
3. Insert the grate firmly into place until secure.
4. Apply silicone around the base if additional stability is required in high-vibration areas.

Best Practices for Using 100mm CP Clearout Square Grate

Maintain long-term drainage integrity by pairing the grate with compatible adhesives and sealants that match the substrate and environmental exposure.

• Use with compatible ceramic, porcelain, and natural stone tiles to embed a flush surface finish.
• Avoid installation methods that require mechanical fasteners, as this unit relies on friction fit.
• In high-vibration areas, verify the Megaflex base seating and supplement with silicone if movement is observed.

Handling & Storage

Handle with standard PPE and store in conditions that protect the brass and A.B.S. Megaflex base from corrosive materials and temperature extremes.

• Store at 5°C to 40°C in a dry environment away from corrosive materials.
• Wear appropriate PPE when handling to prevent contamination and surface damage.
• Keep packaging intact until installation to avoid exposure to moisture or impact.