RLA SAFE2O is a single-component, liquid-applied waterproofing membrane that cures via atmospheric moisture and is based on Silyl Modified Polymer (SMP) technology. Designed as a safe alternative to traditional solvent-based membranes, SAFE2O is Green Tag certified and completely free from isocyanates. It provides excellent mechanical durability and adhesion across a wide range of substrates including concrete, render, screed, masonry, and fibre cement. Ideal for internal and external above-ground waterproofing applications, it complies with AS 4858 and AS 4654.1 standards, rated as a Class III membrane. Its ability to be applied in a single coat on horizontal surfaces makes it a cost-effective and time-saving solution for professional trades.
Q: How should RLA SAFE2O be applied for best waterproofing results?
A: On horizontal surfaces, apply a single even coat at a wet film thickness of 1.2mm. For vertical applications, apply two coats at 0.6mm each. Always use a wet film gauge to verify correct thickness.
Q: How does RLA SAFE2O perform in terms of durability and water resistance?
A: RLA SAFE2O has outstanding durability with >300% elongation and a tensile strength of >1 MPa. It meets Class III waterproofing requirements under AS 4858 and AS 4654.1 for internal and external applications.
Q: What substrates are compatible with RLA SAFE2O?
A: SAFE2O adheres well to concrete, screed, render, masonry, compressed/fibre cement sheets, and PAA structural/marine plywood. Metal or non-porous surfaces should be tested prior to application.
Q: What should I do if the membrane doesn’t adhere properly?
A: Ensure the surface is properly cleaned, cured, and primed. For cracks over 1mm, use RLA MAX SMP 25 to fill and prepare the substrate. Always test adhesion on smooth or non-porous surfaces.
Q: Is RLA SAFE2O safe to use indoors or in enclosed areas?
A: Yes. RLA SAFE2O is solvent and isocyanate-free, making it safe for indoor and confined applications. However, ensure adequate ventilation during application and curing.