SA Sanitary Silicone Sealant
SA Sanitary Silicone Sealant is a neutral curing adhesive with anti-fungal properties, perfect for sealing kitchens, bathrooms, and other wet areas.
- $7.40
- $7.40
- Unit price
- per
Prices do not include GST
Physical Properties
Cure method:
Neutral (oxime)
Colour:
Taupe
Sag/slump:
Non slump (0.1% max)
Hardness (astm d2240):
28 shore a
Tensile strength:
1.7 mpa
Dynamic joint movement:
±25%
Skin time @25°c/50% rh:
5-10 min
Cure time 10mm @25°c/50% rh:
5-7 days
Operating temperature:
-62°c to 180°c
Specific gravity:
1.03
Couldn't load pickup availability
Shipping & Delivery
$15.95 + GST for Australia-wide shipping, excluding DG, oversized, long-length, and bagged items over 15kg. Remote areas and site deliveries are also ineligible. If your order includes any of these, we’ll contact you to arrange additional freight fees. Online purchases only.
SA Sanitary Silicone Sealant
SA Sanitary Silicone Sealant is a one-part, 100% oxime, neutral curing adhesive/sealant containing anti-fungicide to prevent mould growth. It resists mildew when exposed to prolonged hot and humid environments and is suitable for sealing in kitchens, vanities, bathrooms, shower screens, and any other wet area applications.
Key Features
- Non-slump
- Mildew resistant
- One part, ready to use
- Outstanding weatherability
- Excellent adhesion
- Excellent UV resistance
- 5-star VOC compliant
Suitable Substrates
- Glass
- Ceramics
- Aluminium
- Masonry
- Stone
- Concrete
- Most metals
- Many plastics
Uses
- Sealing in kitchens and vanities
- Bathrooms and shower screens
- Wet area applications
- General glazing and weatherproofing
- Humid environments
- Adheres to glass, ceramics, aluminium, masonry, stone, concrete, most metals, and many plastics
Benefits
- Prevents mould and mildew growth
- Resists hot and humid conditions
- Provides durable and reliable sealing
- Easy to apply and maintain
- Suitable for a wide range of substrates
Application Guide
- Cut nozzle at a 45-degree angle to the desired bead width, and apply to substrate with a sealant gun.
- Tool within 5-10 minutes.
- Uncured sealant can be cleaned up with mineral turpentine.
- Some surfaces may need a primer; if so, allow primer to dry before applying sealant.
- Use approved backing material for joints over 10mm deep.
- For a neat appearance, use masking tape and remove it before the sealant skins over.
Surface Preparation
Surfaces must be clean, dry, and free of dirt, grease, oil, rust, and water. Use white spirits or mechanical cleaning with a lint-free cloth. Do not use soap or detergent. For plastics, contact Sealants Australasia for a recommended cleaning solvent. When used on remedial work, all existing sealant must be removed before applying new material.
Limitations
- Not recommended for submerged joints where porous substrates permit water to the bond interface.
- Not for certain rubber products where bleeding of plasticiser may occur.
- Not suitable for horizontal walkways where sealant will be subject to abrasion.
- Cannot be painted, as paint will not adhere to sealant.
- Not recommended for use on polycarbonate plastic.
- Suitability for other types of plastic, including extruded gutter profiles, should be tested before application.
Alternative Products
Need Help with SA Sanitary Silicone Sealant?
Need more information about this product? Hit the button below and reach out to one of our experts now.
Recently Viewed Products
- Choosing a selection results in a full page refresh.