11
Use EverKrete 102 Advanced Thermoset Vinyl Polymer for: High-performance concrete repair, overlays and priming in extreme temperature conditions.
EverKrete 102 is a flexible, micro fibre reinforced Thermoset Vinyl Polymer designed for superior bonding in concrete repair and resurfacing. It offers outstanding performance across Australia’s diverse climates, from the tropics to sub-zero southern regions. Used as a binder, overlay base, or primer, it sets quickly — allowing full traffic use in just 45–90 minutes. Ideal for tradies working on driveways, factory floors, and structural repair jobs.
Primer Information: EverKrete 102 pairs with EverKrete 2P Primer to ensure optimal adhesion. The primer must dry to a tacky state and remain clean for same-day mortar application. Avoid over-drying for best bonding results.
Cure Time: Fast curing in just 45–90 minutes ensures quick job turnaround. Pot life varies based on temperature, giving flexibility on site: approx. 20 mins at 25°C with aggregate; 13 mins without.
Coverage Rate: Refer to the EverKrete Instruction Manual for detailed coverage rates, which vary depending on sand-to-resin ratio and surface texture.
Application Temperature Range: Operates from -18°C to +35°C (-0.4°F to 95°F), far exceeding typical market ranges. This is critical for cold-state or hot-slab environments.
Chemical Properties: A high-solid, low-viscosity vinyl polymer (99% solids by weight) with excellent water resistance, low shrinkage (1.1%), and rapid cure characteristics. Does not re-emulsify once cured, offering long-term durability.
Key Features of EverKrete 102 Advanced Thermoset Vinyl Polymer
- Extremely fast cure time — full traffic use in under 90 minutes
- Wide application range from -18°C to +35°C — unmatched versatility
- Micro fibre reinforcement — added toughness and flexibility
- Non-re-emulsifying — ensures long-term stability and adhesion
Why Choose EverKrete 102 Advanced Thermoset Vinyl Polymer:
- Reduces project downtime significantly with rapid curing
- Minimises material waste due to long pot life control options
- Performs reliably in extreme heat or cold climates across Australia
- Adheres to a wide variety of substrates commonly found in Australian construction
When to Choose EverKrete 102 versus Alternatives:
- Choose EverKrete 102 over epoxy systems when: Rapid job turnaround or cold climate application is critical.
- Consider other options when: Surface is damp or rain is imminent — product must be used in dry conditions only.
Trade-Specific Applications for EverKrete 102:
For Builders and Carpenters:
- Use for structural slab repairs and joint patching
- Adheres to concrete, masonry and pre-cast without shrinkage
- Ideal for overlays in high-traffic areas
For Waterproofers:
- Prime substrates with 2P primer before applying overlays
- Provides slip-resistant, sealed surface overlays
- Handles thermal movement without failure
Application Information
- Required Tools: Stainless trowels, heavy-duty power mixer, acetone, brushes/rollers, leaf blower
- Trade-Specific Tips: Use acetone on trowels for smooth finishes; pre-warm substrate for faster primer cure
- Common Issues and Solutions: Avoid moisture contamination — always apply to dry surfaces; use race tape for clean edges
Storage and Shelf Life
- Storage Requirements: Store in cool, dry areas between 10°C and 25°C
- Shelf Life Information: Minimum 6 months from date of manufacture
- Temperature Considerations: Protect from freezing and extreme heat during storage
Certifications and Compliance
- Meets internal quality standards for industrial use
- Manufactured for compliance with Australian site safety protocols
- Refer to SDS for site-specific compliance
Frequently Asked Questions About EverKrete 102 Advanced Thermoset Vinyl Polymer
Q: Can I apply EverKrete 102 during winter months?
A: Yes. EverKrete 102 can be applied in temperatures as low as -18°C, making it ideal for colder southern Australian states and winter work.
Q: What substrates is EverKrete 102 compatible with?
A: It works with concrete, render, screeds, masonry, brickwork, Hebel, and pre-cast surfaces, provided they are dry and properly cured.
Q: How quickly can I return an area to service?
A: Areas treated with EverKrete 102 are ready for full traffic use in just 45–90 minutes, significantly reducing downtime.
Q: Is it suitable for feather edging?
A: Yes. Use finer sand mesh (40–60) and a pumice stone for smooth feather edging. Add EverKrete LVF to adjust finish colour and texture.
Use EverKrete 102 for:
- Concrete repair and patching
- Creating slip-resistant surface overlays
- Priming concrete surfaces for subsequent coatings
- Repairing masonry and brickwork
- Patching and leveling screeds and pre-cast concrete
Why Use EverKrete 102:
- Fast Curing: Minimizes downtime with quick return to service, crucial for time-sensitive projects.
- Wide Temperature Range: Adaptable for use in various weather conditions, including cold environments with the accelerator.
- Excellent Adhesion: Bonds strongly to multiple substrates, ensuring long-lasting repairs.
- Durable Finish: Provides a tough, weather-resistant surface that withstands environmental wear.
- Versatile Application: Suitable for both repair and overlay applications, offering flexibility on site.
- Micro Fibre Reinforced: Increases strength and durability, enhancing the structural integrity of repairs.
How to apply EverKrete 102 Advanced Thermoset Vinyl Polymer:
- Ensure surface is clean, dry, and within recommended temperature range.
- Pre-mix EverKrete 102 using a power mixer at low speed.
- Add EverKrete Catalyst (2–3% ratio) and mix thoroughly.
- Optionally add EverKrete Accelerator if rapid curing is needed.
- Mix in kiln-dried sand or aggregate and apply using trowel.
- Feather edges and smooth with stainless tools; clean with acetone.
EverKrete 102 Advanced Thermoset Vinyl Polymer limitations:
- Not suitable for damp or wet surfaces — always apply dry.
- Do not use if rain is imminent or during high humidity without heating surface.
- Must be applied on same day as priming for effective bonding.
Safety precautions when using EverKrete 102 Advanced Thermoset Vinyl Polymer:
- Personal Protective Equipment: Gloves, goggles, and coveralls per Australian safety standards
- Ventilation: Apply in well-ventilated areas or use extraction systems
- Handling: Avoid contact with skin and eyes; do not mix with catalyst and accelerator simultaneously
- First Aid: Rinse with water, contact Poisons Centre (131 126 AU), do not induce vomiting if ingested
EverKrete 102 Advanced Thermoset Vinyl Polymer can be used on the following substrates:
- Concrete (28-day cured)
- Sand cement screeds (3:1 ratio)
- Render/masonry (minimum 4-day cure)
- Pre-cast concrete (once release agent removed)
- Brickwork and Hebel
- Choosing a selection results in a full page refresh.