12
Use E P Waterproofing System for: Long-term waterproofing, hardening, and preservation of concrete and masonry surfaces, indoors or outdoors
E P Waterproofing System is an advanced polyester polymer-based solution designed to permanently waterproof, harden, and preserve concrete, brick, plaster, and all masonry structures. Unlike surface coatings, this product penetrates deep into the substrate, initiating a chemical reaction that solidifies internal components, neutralises free lime and alkali, and enhances tensile strength. Ideal for use across industrial, commercial, and residential projects, it is non-toxic, non-flammable, and eco-friendly, providing unmatched durability and protection. Available in 5L and 20L containers, E P Waterproofing System™ ensures long-lasting results even in harsh Australian conditions.
...Frequently Asked Questions About E P Waterproofing System™
Q: How do I apply E P Waterproofing System™?
A: Use a low-pressure sprayer (around 20 psi), applying approximately 1 litre per 5–7 m². Ensure the surface is clean and dry before application and allow sufficient time for curing.
Q: How does E P Waterproofing System™ work?
A: It penetrates masonry and initiates a chemical reaction that solidifies internal structures, waterproofs from within, and neutralises lime and alkali for enhanced durability.
Q: Is it compatible with all masonry materials?
A: Yes, it works on concrete, brick, plaster, mortar, and natural stone. However, it should not be applied over previous silicone or solvent-based coatings.
Q: What should I do if the surface doesn't absorb E P Waterproofing System™?
A: If absorption does not occur, do not apply. This could indicate prior treatment with incompatible coatings. Consider using EP Concrete Block Sealer for large porous areas.
Q: Is special safety equipment required during application?
A: No special PPE is needed. The product is non-toxic, non-flammable, and odourless. Standard safety precautions like eye protection are recommended.
Use E P Waterproofing System™ for:
- Waterproofing basements, tunnels, subways and retaining walls
- Preserving concrete roofs, R.C. gutters, and balconies
- Improving durability of warehouse and factory floors
Why Use E P Waterproofing System™:
- Permanent waterproofing without surface coating – zero maintenance
- Enhances strength, reduces cracking, and prevents surface deterioration
- Eco-friendly, safe to use, and compliant with Australian standards
How to apply E P Waterproofing System™:
- Ensure surface is clean and dry. Rinse with water to remove dust and allow to dry.
- Apply using low-pressure sprayer at 20 psi, ensuring full saturation (1L per 5–7 m²).
- Allow product to cure for 12–24 hours; foot traffic can resume after drying.
- For painting, allow full cure (4–5 days). Ensure surface is dry for best adhesion.
E P Waterproofing System™ limitations:
- Do not apply to surfaces previously treated with silicone or solvent-based coatings
- Not suitable for filling holes or significant cracks – use EP Concrete Block Sealer
- Requires ambient temperature above 10°C during application and curing
Safety precautions when using E P Waterproofing System™:
- Personal Protective Equipment: Safety glasses, gloves recommended
- Ventilation: Adequate ventilation for enclosed spaces, although product is odourless
- Handling: Avoid contact with skin and eyes; rinse thoroughly if contact occurs
- Store out of direct sunlight and away from freezing conditions
E P Waterproofing System can be used on the following substrates:
- Concrete – enhances strength and prevents moisture penetration
- Brick – preserves structure and prevents efflorescence
- Plaster and Mortar – prevents cracking and dusting
- Natural Stone – protects against weathering and staining
- Choosing a selection results in a full page refresh.