Epocote F100W Clear is a two-pack, water-based epoxy primer and sealer. It has an exceptionally long pot life but cures quickly to a fully bonded primer or tough, chemically resistant sealer. It can be used as a primer on damp or "green" concrete substrates prior to waterproofing with membranes. It is also an effective sealer to prevent efflorescence and staining on tiles and steps.
Product Characteristics
- Colour: Clear
- Size: 20 Kg
Uses
- Primer on damp or “green” concrete before waterproofing with membranes
- Sealer to prevent efflorescence and staining on tiles and steps
Benefits
- Very low VOC and low odour
- Long pot life, fast cure, no waste
- Can be applied to damp or green concrete (max 10% moisture)
- Simple and economical application
- Easily mixed in full sets, easy clean-up
- Compliant with AS 3600 and AS 3740
Suitable Substrates
- Concrete (min strength grade 25 MPa)
- Tiles
- Steps
Coverage
0.25 kg/m2 (4 m2/litre) depending on substrate condition
Drying and Cure Time
Tack free time: 2-4 hours at 25°C / 60% RH Maximum recoat time: 24 hrs at 20°C
Handling
Wear protective clothing, gloves and goggles when handling. Discard material that has started to gel. Pot life reduces in hot weather. Cold weather or cold surfaces slow cure time.
Cleaning
Uncured product can be cleaned with water. Xylene may assist removal of cured product.
Storage
Store in a dry, cool place. Shelf life is 12 months from date of manufacture in unopened containers.
