EP Supreme - Penetrating Waterproofing System
EP Waterproof Supreme™ is a premium waterproofing sealer formulated with advanced urethane and polyester polymer technology.
- $150.00
- $150.00
- Unit price
- per
Prices do not include GST
Physical Properties
Colour:
Translucent
State:
Liquid
Specific gravity (water = 1):
1.34 @ 20°c
Solubility in water:
Dilutable
Ph:
6.0
Boiling point:
100°c (water)
Freezing point:
0°c (water)
Theoretical coverage:
4-6m² per litre
Application method:
Hand or mechanical sprayer
Packaging:
5l, 20l, and 200l drums
Shelf life:
12 months minimum (in protected storage between 5-38°c)
Couldn't load pickup availability
Shipping & Delivery
**$15.95 + GST for Australia-wide shipping, excluding DG, oversized or long-length items, and bagged items weighing 15kg or above. If your order includes any of these, you will be contacted to arrange additional freight fees
EP Waterproof Supreme™ is a premium waterproofing sealer formulated with advanced urethane and polyester polymer technology. Designed specifically for masonry and concrete surfaces, it offers superior performance compared to other aliphatic solutions. This unique, non-toxic, and non-flammable formula penetrates deep into the substrate, hardening and waterproofing from within.
Key Features
- Advanced urethane and polyester polymer technology
- High surface tension for easier stain removal
- Single-coat application for simplified use
- Non-toxic, non-hazardous, and non-flammable
- High chemical resistance
- Prevents fretting mortar and strengthens concrete
- Compatible with sealants, adhesives, and paints
Uses
- Waterproofing concrete, brick, plaster, mortar, and most natural stone
- Protecting against rust in reinforced concrete
- Improving bonding between old and new concrete
- Neutralizing lime and alkali in masonry, preventing paint saponification
- Preventing hairline cracking and uneven shrinkage in existing structures
Benefits
- Superior waterproofing performance
- Easier cleaning due to high surface tension
- Increases tensile strength and wear resistance of concrete
- Enhances adhesion and longevity of paints and coatings
- Prevents moisture damage and deterioration of masonry
- Safe and environmentally friendly formula
Application Guide
- For new concrete structures: Apply after 2-3 days of curing.
- For older concrete: Apply at any time.
- Use a low-pressure sprayer (handheld or backpack) at a maximum of 20 PSI.
- Spray the entire surface area using approximately 1 litre per 4-6 square meters.
- Allow to dry completely before applying paint (if desired).
Alternative Products
Need Help with EP Supreme - Penetrating Waterproofing System?
Need more information about this product? Hit the button below and reach out to one of our experts now.
Recently Viewed Products
- Choosing a selection results in a full page refresh.