RLA Aftek Trulevel Tuff Top Self Levelling Overlay

Uses

• Levelling floors in commercial, domestic, and industrial settings
• Creating smooth surfaces for floor coverings like vinyl, timber, carpet, linoleum, and tiles
• Suitable for areas with heavy traffic and high point loads (when applied at 15mm minimum thickness)
• Use in internal and external applications
• Can be used as a wear surface finish in commercial applications with a suitable coating
• Compatible with underfloor heating systems

Benefits

• Rapid-drying formula for faster project completion
• Self-levelling properties for easy application and a smooth finish
• High mechanical resistance suitable for heavy-duty use
• Suitable for a variety of floor coverings
• Can be used indoors and outdoors
• Compatible with underfloor heating

Application Guide

1. Prepare the substrate: Ensure it's clean, dry, sound, and free from contaminants.
2. Prime the substrate: Use RLA Universal Primer, diluted for porous substrates and undiluted for non-porous substrates.
3. Mix RLA TruLevel TuffTop: Combine one 20kg bag with 3.8-4.0 litres of clean water. Mix thoroughly for 3 minutes until lump-free.
4. Apply the mixture: Use a gauge rake, spreader, squeegee, screed bar, trowel, or pump to apply the mixture to the desired thickness.
5. Allow to set: The product will harden in approximately 3-4 hours at 23°C.
6. Install floor coverings: Depending on the type of flooring, installation can typically begin after 18-72 hours.

Limitations

• Not suitable for substrates with rising dampness.
• Do not apply over expansion joints.
• Extended drying times in cold temperatures.