S100 Designer Silicone - Dark Grey (CLEARANCE)
Neutral Curing Sanitary Anti-Fungal Silicone Sealant.
- $3.50
$6.86- $3.50
- Unit price
- per
Prices do not include GST
Physical Properties
Type of product:
Polysiloxanes
Curing system:
Oxime
Density (specific gravity):
Trans 1.03
Shore a hardness:
20
Elongation at break (iso 8339):
300%
Application temperature:
+5°c to +35°c
Storage:
Cool, dry between 10°c and 35°c
Temperature resistance:
-50°c to +150°c
Voc:
43gm/lt
Conforms to:
Californian bureau of air quality management rule 1168
Shelf life:
12 months in original packaging
Clean up:
Uncured - white spirit or turps
Movement capability:
±30%
Elastic recovery:
>90%
Couldn't load pickup availability
Shipping & Delivery
**$15.95 + GST for Australia-wide shipping, excluding DG, oversized or long-length items, and bagged items weighing 15kg or above. If your order includes any of these, you will be contacted to arrange additional freight fees
Sanitary S100 is a neutral curing, anti-fungal silicone sealant ideal for bathrooms, laundries, kitchens, and food preparation areas. It provides excellent adhesion to most building and engineering materials like glass, aluminium, steel, ABS, and stainless steel. Sanitary S100 is UV stable and colour stable, making it suitable for both indoor and outdoor use.
Key Features:
- Anti-Fungal Properties
- Neutral Cure
- Excellent Adhesion
- UV Stable
- Colour Stable
- Food Safe
Suitable Substrates:
- Glass
- Aluminium
- Steel
- ABS
- Stainless Steel
- Most common building materials (testing recommended)
Certifications:
- Conforms to Californian Bureau of Air Quality Management Rule 1168
Uses
- Sealing joints in bathrooms, laundries, and kitchens
- Food preparation areas and commercial kitchens
- Indoor and outdoor applications
- Sealing joints in glass, aluminium, steel, ABS, and stainless steel
Benefits
- Neutral curing
- Anti-fungal properties
- Excellent adhesion to common building materials
- UV stable
- Colour stable
- Suitable for indoor and outdoor use
Application Guide
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust or grease. Use MEK, alcohol, or ethanol to degrease if necessary.
- Priming (Optional): Primer is generally not required, but adhesion testing is recommended. If needed, use an appropriate primer.
- Backer Rod (Optional): Use Adhefoam open-cell or closed-cell backer rod where required. For joints without backer rod, use bond breaker tape to prevent three-sided adhesion.
- Application: Fill the joint completely, avoiding air entrapment. Dry tool immediately before the sealant skins (within 10 minutes, depending on conditions).
- Cleaning: Clean uncured material with white spirit or solvent. Clean tools with white spirit or solvent. Clean surfaces with silicone cleaner. Cured material can only be removed mechanically.
Limitations
- Adhesion testing is highly recommended for optimal performance.
Alternative Products
Need Help with S100 Designer Silicone - Dark Grey (CLEARANCE)?
Need more information about this product? Hit the button below and reach out to one of our experts now.
Recently Viewed Products
- Choosing a selection results in a full page refresh.