EP Waterproofing - Penetrating Waterproofing System
E P Waterproofing System™ permanently waterproofs and preserves concrete, brick, block and all masonry surfaces.
- $480.00
- $480.00
- Unit price
- per
Prices do not include GST
Physical Properties
Colour:
Translucent
State:
Liquid
Specific gravity (water = 1):
1.34 @ 20°c
Solubility in water:
Dilutable
Ph:
6.0
Boiling point:
100°c (water)
Freezing point:
0°c (water)
Theoretical coverage:
5-7 m²/litre
Application method:
Hand or mechanical sprayer
Packaging:
5l, 20l, and 200l drums
Shelf life:
12 months minimum (in protected storage between 5-38°c)
Couldn't load pickup availability
Shipping & Delivery
**$15.95 + GST for Australia-wide shipping, excluding DG, oversized or long-length items, and bagged items weighing 15kg or above. If your order includes any of these, you will be contacted to arrange additional freight fees
EP Waterproofing System™ is a revolutionary, non-toxic, and non-flammable waterproofing solution formulated with advanced polyester polymer technology. Unlike surface coatings, EP Waterproofing System™ penetrates deep into the pores of concrete, brick, plaster, mortar, and natural stone, providing long-lasting protection from water damage and deterioration. This unique formula hardens and strengthens the substrate from within, increasing its density and durability.
Key Features
- Advanced polyester polymer technology
- Non-toxic, non-flammable, non-caustic
- Single-coat application
- Deeply penetrating, not just a surface coating
- Prevents water damage, cracking, and deterioration
- Increases tensile strength and wear resistance
- Neutralizes lime and alkali, preventing paint saponification
- Improves bonding between old and new concrete
- Suitable for various surfaces: concrete, brick, plaster, mortar, natural stone
Uses
- Industrial, commercial, and residential applications
- Homes, warehouses, commercial buildings, factories
- Roads, tunnels, bridge decks, parking structures
- Hydroelectric dams, concrete roofs, subways, basements, reservoirs
- Indoor and outdoor use on new or old masonry
Benefits
- Permanent waterproofing solution
- Prevents leaks, cracks, and deterioration
- Increases strength and durability of concrete and masonry
- Enhances paint adhesion and longevity
- Non-toxic and environmentally friendly
- Easy application with brush, roller, sprayer, mop, or flushing
Application Guide
- Ensure surfaces are clean and dry. Remove dirt, dust, oil, grease, etc.
- Apply using a low-pressure sprayer at 20 PSI.
- Spray the entire surface area, using approximately 1 litre per 5-7 m².
- Allow to dry completely (12-24 hours for new plaster, 4-5 days for complete curing).
- If painting, allow the surface to dry completely before applying paint.
Limitations
- Not suitable for surfaces previously coated with silicone, siloxane, or solvent-based materials.
- Not recommended for quick-stage block walls with very large holes or pores (use EP™ Concrete Block Sealer).
Alternative Products
Need Help with EP Waterproofing - Penetrating Waterproofing System?
Need more information about this product? Hit the button below and reach out to one of our experts now.
Recently Viewed Products
- Choosing a selection results in a full page refresh.