Everflex Multi Prime is a Single Part rapid drying solvent free low VOC water-based acrylic primer, suitable for Porous and Non-Porous Substrates. Multi-Prime is compatible with most Adheseal supplied Tile Adhesives, Floor Levelling Compounds, Grouts and Waterproofing Membranes.
Product Characteristics:
- Colour: Green
- Sizes: 5 Litres, 20 Litres
Acceptable Substrates:
- Concrete after curing period of 28 days
- 3:1 sand cement screed or C-Bed
- Masonry / render after curing period of at least 4 days
- Cement sheeting / underlay / external weatherboard / blue board
- Pre-cast concrete once release agent has been removed/ dissipated
- Wet area plasterboard / Villaboard
- Timber flooring including structural ply-wood Type A (PAA JAS-ANZ)
- Brickwork, Hebel (aggregate block)
- Some Plastics
- Ceramic Tiles
- Burnished Concrete
Coverage:
Approximately 5 to 10m per litre. Coverage rate varies depending on substrate porosity.
Cure Time:
Allow the primer to dry to a translucent film (approx. 1 hour @ 23°C). Once Multi-Prime is a tack-free translucent film, subsequent coatings/compounds can be applied over the primer. Please note all cure times vary depending on atmospheric conditions and porosity of the substrate.
Clean Up:
While the product is still wet, tools and spills can be efficiently cleaned with water. For cured product removal, consider using mechanical means.