Gripset 11Y

Gripset 11Y represents the latest advancement in SBR latex technology. Specifically formulated for use in cement-based compounds, Gripset 11Y enhances adhesion, strength, and waterproof properties of screeds, renders, and general cementitious toppings. It offers excellent performance in areas exposed to weather, chemicals, continuous immersion, as well as internal and underground environments. Gripset 11Y, when used with Gripset DM, is certified to AS/NZ 4020 for use in potable water storage facilities. It is suitable for both remedial applications and new construction projects.

Product Characteristics:

• Colour: White Thin Liquid
• Sizes: 5 Litres, 15 Litres

Features & Benefits:

• Improved adhesion strength
• Reduced water/cement ratio
• Increased flexural strength and durability
• Improved water resistance and waterproof properties
• Improved crack, frost, and salt resistance
• Reduction of permeability to gases and liquids
• Higher early strength development & reduced shrinkage
• Improved resistance to aggressive conditions
• Excellent resistance against freeze/thaw cycles and de-icing salts
• Improved workability at reduced water demand
• Improved abrasion resistance
• Solvent-free, non-toxic, and environmentally safe

Application:

Gripset 11Y is suitable for a wide range of applications in commercial, industrial, mining, and residential settings.

Substrates:

Substrates suitable for Gripset 11Y applications include:

• Masonry surfaces, renders, screeds
• Concrete blocks and aerated concrete
• Clay bricks and pavers
• Dense concrete
• Cement sheeting, plasterboard, and general wet area linings
• Marine plywood and wet area particle board
• Asphalt and cured bitumen surfaces
• Existing acrylic coatings and Gripset membranes

Surface Preparation:

Thorough surface preparation is crucial before applying Gripset 11Y. All substrates must be structurally sound, smooth, stable, dry, and clean. Rough surfaces and voids should be evened or filled, and brick/block surfaces should be pointed flush. General surface defects should be repaired. Building surfaces must adhere to the manufacturer's recommendations and relevant building standards in force at the time of product application. Surfaces should be free of sharp protruding objects, loose material, de-bonded coatings, curing membranes/agents, release agents, wax residues, foreign particles, laitance, algae and moss, grime, oils, animal fats, or grease remains. Mechanically remove structurally unsound layers and surface contaminants through abrasive blasting, blast tracking, grinding, or equivalent methods.

Storage Conditions:

• Best stored at room temperature
• Avoid cold freezing conditions and off concrete floors
• Do not store in direct sunlight
• Shelf life: 12 months in unopened container

Additional Product Downloads:

• Download TDS
• Download SDS