Adheseal Everflex Multi-Prime

Everflex Multi-Prime is a Single Part rapid dry-ing solvent free low VOC water-based acrylic primer, suitable for Porous and Non-Porous Substrates.
Multi-Prime is compatible with most Adheseal supplied Tile Adhesives, Floor Levelling Com-pounds, Grouts and Waterproofing Mem-branes.

Product Characteristics:

• Colour: Green
• Sizes: 5 Litres, 20 Litres

Uses:

• For use over porous and non-porous substrates
• Primer for Everflex Waterproofing Mem-branes
• Painted surfaces (water-based only)
• Compatible with cement-based ceramic tile adhesives and grouts
• Primer for Self-levelling compounds

Benefits:

• Fast drying
• Suitable for Porous & Non-Porous substrates
• Can be a primer for Waterproof mem-branes, Self-leveling compounds, Tile adhesives and Grouts
• Excellent adhesion to most common building materials (preliminary tests suggested)
• Ready to use, Single pack, user friendly
• Non-corrosive
• Proven long term durability and resilient
• Non-toxic, low VOC, meets “green star” environmental criteria
• Inhibits mould and biological growth
• Suitable for internal & external applications
• Resists mould & mildew in hot and humid environments
• Low odour

Limitations:

• Do not apply when temperatures are below 10oc or above 35oc
• Limited UV resistance (not designed for long term UV exposure and must be overcoated)
• Do not apply on damp, wet or contami-nated substrates, if it is raining or if rain is imminent
• Not suitable for areas subject to hydro-static pressure or rising damp, Everflex VBS is recommended
• Foot traffic

Acceptable Substrates:

• Concrete after curing period of 28 days
• 3:1 sand cement screed or C-Bed
• Masonry / render after curing period of at least 4 days
• Cement sheeting / underlay / external weatherboard / blue board
• Pre-cast concrete once release agent has been removed/ dissipated
• Wet area plasterboard / Villaboard
• Timber flooring including structural ply-wood Type A (PAA JAS-ANZ)
• Brickwork, Hebel (aggregate block)
• Some Plastics
• Ceramic Tiles
• Burnished Concrete

Coverage:

Approximately 5 to 10m per litre. Coverage rate varies depending on substrate porosity.

Cure Time:

Allow the primer to dry to a translucent film (approx. 1 hour @ 23°C). Once Multi-Prime is a tack-free translucent film, subsequent coatings/compounds can be applied over the primer. Please note all cure times vary depending on atmospheric conditions and porosity of the substrate.

Clean Up:

While the product is still wet, tools and spills can be efficiently cleaned with water. For cured product removal, consider using mechanical means.

Additional Product Downloads:

• Download TDS