{"product_id":"anodized-aluminum-balcony-drip-angle-12mm-x-5m","title":"Anodized Aluminum Balcony Drip Angle (12mm x 5m)","description":"\u003csection\u003e\n\u003ch3\u003eWhy Choose Anodized Aluminum Balcony Drip Angle (12mm)\u003c\/h3\u003e\n\u003cp\u003eUse Anodized Aluminum Balcony Drip Angle (12mm) to shield balcony fascias from water damage while delivering a clean edge finish and directing runoff away from external cladding or render. This profile is purpose-built for durability in exposed environments, combining anodised aluminium corrosion resistance with a precision-angled drip lip that prevents water from tracking back onto the facade. It is the reliable choice for builders and waterproofers prioritising long-term moisture management and a sharp architectural transition.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eAnodized Aluminum Balcony Drip Angle (12mm) Common Uses\u003c\/h3\u003e\n\u003cp\u003eBalcony Drip Trim is selected to protect balcony fascias, deliver a clean edge finish, and direct runoff away from external cladding or render. Its design integrates seamlessly with tiled or rendered balcony systems where moisture control and aesthetic continuity are critical.\u003cimg\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProtecting balcony fascias from water penetration and staining.\u003c\/li\u003e\n\u003cli\u003eDelivering a clean, continuous edge finish on tiled or rendered balconies.\u003c\/li\u003e\n\u003cli\u003eDirecting runoff away from external cladding to preserve surface integrity.\u003c\/li\u003e\n\u003cli\u003eReducing long-term maintenance by preventing grout washout and substrate deterioration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eWhere Anodized Aluminum Balcony Drip Angle (12mm) Performs Best\u003c\/h3\u003e\n\u003cp\u003eThis profile performs best on concrete screed and waterproofed substrates in outdoor balcony environments where corrosion resistance and precise water diversion are required. It is suited to residential, commercial, and multi-storey construction projects where membrane integrity at the slab edge must be preserved.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eCoverage, Skin Time \u0026amp; Cure\u003c\/h3\u003e\n\u003cp\u003eThe 12mm profile is sized for 12mm tile and adhesive assemblies, with lengths available in 3.0m and 5.0m units that should be stored flat to prevent kinking. Anodised aluminium provides inherent corrosion resistance, and the system supports long-term aesthetic integrity in exposed conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProfile height: 12mm, matched to 12mm tile and adhesive assemblies.\u003c\/li\u003e\n\u003cli\u003eAvailable lengths: 3.0m and 5.0m; store flat to avoid kinking.\u003c\/li\u003e\n\u003cli\u003eMaterial: Anodised aluminium for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eShelf life: Indefinite when stored in dry, non-corrosive conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eSurface Prep \u0026amp; Application\u003c\/h3\u003e\n\u003cp\u003eSubstrate preparation is essential to ensure durable adhesion and membrane continuity. The surface must be dust-free and dry for adhesive-fixed applications, and the waterproof membrane should be fully cured before mechanical fixing of the trim. Proper alignment of internal and external corner profiles maintains a seamless edge detail.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure substrate is dust-free and dry before installing the trim edge.\u003c\/li\u003e\n\u003cli\u003eAllow waterproof membrane to fully cure before mechanical fixing.\u003c\/li\u003e\n\u003cli\u003eCut trim to required length and secure with compatible adhesive or mechanical fixings.\u003c\/li\u003e\n\u003cli\u003ePosition the drip lip facing outward and verify alignment with perimeter edges.\u003c\/li\u003e\n\u003cli\u003eWhen possible, lap the membrane over internal upturns to maintain continuity.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eBest Practices for Using Anodized Aluminum Balcony Drip Angle (12mm)\u003c\/h3\u003e\n\u003cp\u003eIntegrate the system with compatible adhesive or mechanical fixings and ensure membrane curing to avoid bond failure. Consider additional marine-grade coating in extreme coastal or high-salinity zones to preserve the anodised finish and long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only with fully cured waterproof membranes to prevent chemical interference.\u003c\/li\u003e\n\u003cli\u003eSelect internal or external corner profiles for consistent perimeter detailing.\u003c\/li\u003e\n\u003cli\u003eIn extreme coastal conditions, evaluate the need for supplementary marine-grade coating.\u003c\/li\u003e\n\u003cli\u003eMaintain a clean, dust-free substrate to ensure reliable adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch3\u003eHandling \u0026amp; Storage\u003c\/h3\u003e\n\u003cp\u003eHandle with attention to prevent kinking or bending, particularly with longer 5.0m lengths that must retain a clean architectural edge line. Appropriate storage preserves the anodised surface and dimensional stability of the profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear appropriate PPE and ensure ventilation when cutting or modifying profiles.\u003c\/li\u003e\n\u003cli\u003eStore materials flat in a dry, non-corrosive environment to avoid deformation.\u003c\/li\u003e\n\u003cli\u003eTransport and handle 5.0m lengths carefully to prevent kinking.\u003c\/li\u003e\n\u003cli\u003eDispose of offcuts in accordance with local regulations and site waste management protocols.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"Adheseal","offers":[{"title":"12mm x 5mt Length","offer_id":48495146664128,"sku":"BALALAN12\/5","price":134.33,"currency_code":"AUD","in_stock":true},{"title":"Internal Corner (90°) For 5m Length Only","offer_id":48495146696896,"sku":"BALALAN12\/5INT","price":25.05,"currency_code":"AUD","in_stock":true},{"title":"External Corner (90°) For 5m Length Only","offer_id":48495146729664,"sku":"BALALAN12\/5EXT","price":25.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/anodized-balcony-drip-angle-12mm-waterproofing-adheseal.jpg?v=1763707397","url":"https:\/\/adheseal.com.au\/products\/anodized-aluminum-balcony-drip-angle-12mm-x-5m","provider":"Adheseal","version":"1.0","type":"link"}