S100 Kitchen & Bathroom Silicone 300ml

SILADS100AG/CTG

Buy in Bulk and Save!
Price Per Unit Price Per Box (20)
$6.86 $6.17

Sanitary S100 is an anti-fungal silicone sealant suitable for use in bathrooms, laundries, kitchens, or wherever sanitary properties are required. It exhibits good adhesion without primer on a wide range of building and engineering materials, including glass, aluminium, steel, ABS, and stainless steel. Sanitary S100 is also suitable for use in food preparation areas, such as commercial kitchens. It is UV stable and colour stable, making it suitable for outdoor areas as well.

PRODUCT CHARACTERISTICS:

  • Colour: Ashville Grey, Dark Grey, Eva Grey, Lydia Grey, Koala Grey, Off-White, Tile Grey, Travertine, Clear, Stark White
  • Size: 300ml

Surfaces

All surfaces should be dry, clean, and free from dust or grease. If necessary, degrease with MEK, alcohol, or ethanol. Use primer when necessary. It is recommended to carry out adhesion tests to determine the suitability of the product for its application.

Primers

Sanitary S100 exhibits good adhesion to most common building materials without the use of a primer. However, testing is highly recommended.

Backer Rod

Use Adhefoam open-cell backer rod where required. Closed-cell backer rod is also suitable, but care must be taken not to damage the outer skin of the rod, as this can cause gassing (bubbles) in the sealant. When the depth of the joint does not allow for backer rod, a bond breaker tape is required to prevent three-sided adhesion.

Application

Fill the prepared joint completely, taking care not to entrap air (entrapped air may cause bubbles in the sealant). Dry tool immediately before the sealant skins. The tooling time is a minimum of 10 minutes, depending on temperature and humidity.

Cleaning

For uncured sealant, use white spirit or solvent for tools and silicone cleaner for surfaces. For cured sealant, clean mechanically.

Shelf Life

12 months if kept in the original packaging and stored in cool and dry conditions.

Packaging

Available in 300ml cartridges.

Physical Properties

  • Type of product: Polysiloxanes
  • Curing system: Oxime
  • Density (specific gravity): Trans 1.03
  • Shore A hardness: 20
  • Elongation at break (ISO 8339): 300%
  • Application temperature: +5°C to +35°C
  • Storage: Cool, dry between 10°C and 35°C
  • Temperature resistance: -50°C to +150°C
  • VOC: 43gm/lt
  • Conforms to: Californian Bureau of Air Quality Management Rule 1168
  • Shelf life: 12 months in original packaging
  • Clean up: Uncured - white spirit or turps
  • Movement Capability: ±30%
  • Elastic recovery: >90%

Additional Product Downloads:

$6.86

Prices do not include GST
$6.86

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tim Allcock

S100 Kitchen & Bathroom Silicone

t
tori hubbard
S100 kitchen and bathroom silicone

Great product

Your cart

×