{"title":"Roof Membranes","description":"\u003cp\u003eSheet and liquid membranes for exposed roofs. Fatrafol reinforced PVC sheets for adhered or mechanically fixed systems, Fatrabond membrane adhesive, and Everflex and Gripset liquid membranes for roller-applied barriers. Pick by roof design, substrate, and exposure, and follow the maker's system instructions.\u003c\/p\u003e","products":[{"product_id":"everflex-wpuv","title":"Everflex WPUV Elastomeric Waterproof Membrane","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor exposed roofs, balconies, and wet areas complying with NCC requirements, Everflex WPUV Elastomeric Waterproof Membrane provides a seamless, Class III high-elasticity barrier. Formulated to resist UV exposure without degrading, this micro-fibre reinforced membrane remains flexible over time and will not re-emulsify when subjected to prolonged water ponding or immersion.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverflex WPUV is a single-component, water-based copolymer that cures to form a fully bonded, elastomeric barrier. It is micro-fibre reinforced to improve film strength and tensile durability. Achieving Class III high elasticity allows the cured membrane to accommodate structural movement in joint, wall, and floor transitions without rupturing. It also incorporates biological inhibitors to prevent the growth of mould and mildew in damp internal or external environments.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass III:\u003c\/strong\u003e High elasticity classification under AS-4858:2004 and AS4654.1:2012, allowing maximum joint and substrate movement accommodation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0mm DFT:\u003c\/strong\u003e The minimum dry film thickness required for internal installations, achieved in at least two coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.3mm DFT:\u003c\/strong\u003e The minimum dry film thickness required for external installations to withstand environmental exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.2g\/m²\/24h:\u003c\/strong\u003e Moisture vapour permeability rating, controlling water transmission through the cured film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;2g\/L VOC:\u003c\/strong\u003e Low volatile organic compound content, meeting Green Star environmental criteria for indoor air quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eEverflex WPUV is suitable for both internal and external substrates, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExposed roofs and under-pedestal deck systems.\u003c\/li\u003e\n\u003cli\u003ePatios, terraces, balconies, and decks.\u003c\/li\u003e\n\u003cli\u003eWet areas, shower recesses, laundries, toilets, and kitchens.\u003c\/li\u003e\n\u003cli\u003eUnder-tile installations using solvent-free tile adhesives such as RLA or Gripset C-Lite, C-Mastic, Unigrip, and Mastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcceptable substrates\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete cured for at least 28 days.\u003c\/li\u003e\n\u003cli\u003eMasonry and cement render cured for at least 4 days.\u003c\/li\u003e\n\u003cli\u003e3:1 sand cement screeds or \u003ca href=\"\/products\/gripset-c-bed\"\u003eGripset C-Bed\u003c\/a\u003e engineered screeds.\u003c\/li\u003e\n\u003cli\u003eCement sheeting, underlay, external weatherboard, and blue board.\u003c\/li\u003e\n\u003cli\u003ePre-cast concrete once release agents are completely removed.\u003c\/li\u003e\n\u003cli\u003eWet area plasterboard and Villaboard.\u003c\/li\u003e\n\u003cli\u003eTimber flooring including Type A structural plywood (PAA JAS-ANZ).\u003c\/li\u003e\n\u003cli\u003eBrickwork and Hebel aggregate blocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation limits and preparation\u003c\/h3\u003e\n\u003cp\u003eAll surfaces must be structurally sound, dry, clean, and free of oils, grease, curing compounds, and loose materials. Ground-surface protrusions must be removed to prevent thin spots in the membrane. Non-structural cracks and holes must be filled prior to application. WPUV cannot span open gaps.\u003c\/p\u003e\n\u003cp\u003eFor internal priming, apply Everflex WBP. For external balconies and roof decks, prime with \u003ca href=\"\/products\/everflex-vbs\"\u003eEverflex VBS\u003c\/a\u003e. Apply Everflex WPUV within 2 to 24 hours of the primer becoming touch-dry.\u003c\/p\u003e\n\u003cp\u003eThoroughly mix Everflex WPUV before application. Apply the first coat with a brush or roller at approximately 0.75mm wet film thickness (WFT). Apply the second coat at a right angle to the first at 0.75mm WFT. Always verify wet film thickness during application with a WFT gauge to ensure specified dry film thickness (DFT) targets are met. Allow 48 hours curing time at 25°C and 50% relative humidity before tiling.\u003c\/p\u003e\n\u003ch3\u003eSystem detailing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor wastes and puddle flanges:\u003c\/strong\u003e Rebate into the floor to ensure positive drainage. Seal gaps and perimeters with Adheseal Hi-Flex MS sealant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterstops and plastic corner angles:\u003c\/strong\u003e Seal and secure using Hi-Flex MS sealant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGaps, joints, and internal corners:\u003c\/strong\u003e Apply a fillet of Hi-Flex MS sealant or a suitable bond breaker in accordance with Australian Standards. For dynamic cracks, expansion joints, and control joints, use Adheseal Elastoband or Butyl Tape systems. Polyester reinforcing fabric can be embedded into the first membrane coat at joints and corners if required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional protection:\u003c\/strong\u003e Apply LS slip-resistant UV protective coating where further mechanical and UV wear protection is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply if ambient or substrate temperatures are below 10°C or above 35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply on damp, wet, or contaminated substrates, or if rain is imminent.\u003c\/li\u003e\n\u003cli\u003eNot suitable for areas subject to negative hydrostatic pressure or rising damp.\u003c\/li\u003e\n\u003cli\u003eNot suitable for foot traffic greater than regular maintenance access.\u003c\/li\u003e\n\u003cli\u003eLight Grey has a Solar Reflectance Index (SRI) of approximately 0.32. Adding up to 75ml of black Glycol tint will alter the cured colour but will change the SRI rating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":46183855685824,"sku":"WPUV\/15","price":177.01,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everflex-wpuv-waterproofing-balconies-decks-adheseal.png?v=1763706991"},{"product_id":"gripset-p39-polyurethane-hybrid-membrane","title":"Gripset P39 Membrane","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor internal and external wet areas, balconies, and roofs where pooling water or UV exposure typically threatens membrane integrity, P39 Membrane provides a water-based hybrid polyurethane barrier. It cures to handle early water ponding and permanently wet conditions without re-emulsifying, protecting substrates including concrete, fibre cement sheeting, and wet-area timber sheeting.\u003c\/p\u003e\n\n \u003ch3\u003eHow it works\u003c\/h3\u003e\n \u003cp\u003eP39 Membrane combines hybrid polyurethane chemistry with fibre reinforcement to achieve high elasticity and a low vapour transmission rate. This formulation prevents water absorption in constantly wet environments, such as laundries, bathrooms, podiums, and parapets. The cured film withstands light foot traffic and resists UV degradation on exposed external surfaces, or it can serve as an under-tile membrane beneath polymer-modified cement adhesives.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e\u0026gt;300% Class III elongation:\u003c\/strong\u003e Accommodates thermal movement and structural shifting in aerated concrete blocks, balconies, and joint transitions without cracking.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e\u0026gt;3MPa tensile strength:\u003c\/strong\u003e Provides high tear resistance under light foot traffic and overlaid screeds or toppings.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.6g\/m² \/ 24 hours vapour transmission:\u003c\/strong\u003e Restricts moisture vapour movement through the subfloor to protect internal spaces from rising damp.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.0mm minimum dry film thickness (DFT):\u003c\/strong\u003e The required specification for under-tile applications, achieved by applying a minimum of two coats at 1.5 litres\/m² total coverage.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.2mm minimum dry film thickness (DFT):\u003c\/strong\u003e The required specification for exposed, trafficable roofs, achieved by applying three coats at 2.0 litres\/m² total coverage.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e2 to 4 hour recoat window:\u003c\/strong\u003e Allows multi-coat application to proceed quickly under standard conditions (23°C and 50% relative humidity).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cp\u003eP39 Membrane bonds to common building substrates, provided they are primed correctly. Approved substrates include:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eConcrete, render, and masonry (concrete must cure for 28 days; sand-cement screeds for 7 days)\u003c\/li\u003e\n \u003cli\u003eFibre cement sheeting and plasterboard\u003c\/li\u003e\n \u003cli\u003eWet area timber sheeting and external grade plywood\u003c\/li\u003e\n \u003cli\u003eAerated concrete panels and blocks\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eRequired priming\u003c\/h3\u003e\n \u003cp\u003eThe membrane must be applied onto primed surfaces. Select the primer based on substrate conditions:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePorous or absorbent surfaces:\u003c\/strong\u003e Apply \u003ca href=\"\/products\/gripset-gp-general-purpose-primer\"\u003eGripset GP Primer\u003c\/a\u003e by brush or roller at a minimum coverage of 1 litre per 8–10m².\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNon-porous or non-absorbent surfaces:\u003c\/strong\u003e Apply \u003ca href=\"\/products\/gripset-op-primer\"\u003eGripset OP Primer\u003c\/a\u003e at a minimum coverage of 1 litre per 12m².\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGreen or damp surfaces with residual moisture:\u003c\/strong\u003e Apply Xpress Primer H2O Plus at a minimum coverage of 1 litre per 8m².\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDamp surfaces or rising damp:\u003c\/strong\u003e Apply 1 to 2 coats of \u003ca href=\"\/products\/gripset-e60\"\u003eGripset E60\u003c\/a\u003e at a minimum coverage of 1 litre per 3m² per coat for mineral surfaces with residual moisture \u0026gt;80% RH (ASTM F2170) or \u0026gt;5% moisture content (ASTM F2659).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eDetailing and bond breakers\u003c\/h3\u003e\n \u003cp\u003eCritical joints, junctions, penetrations, and cracks must be sealed prior to applying the membrane. Use one of the following systems:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eOption A (High Movement):\u003c\/strong\u003e Embed \u003ca href=\"\/products\/elastoproof-b50\"\u003eElastoproof B50\u003c\/a\u003e Joint Band into a wet 150mm wide strip of P39 Membrane, press out all air pockets, and fully encapsulate with a second coat. Use prefabricated internal (90°) or external (270°) corners at junctions.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOption B:\u003c\/strong\u003e Apply self-adhesive BRW PF Tape centrally over the joint, pressing firmly with a spatula or roller to remove creases.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOption C:\u003c\/strong\u003e Install a bond breaker fillet at horizontal and vertical transitions using RLA Max SMP 25 sealant, tooled smooth.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePenetrations:\u003c\/strong\u003e Fit Elastoproof Collars over protruding pipes and bed into wet membrane, seal with BRW PF Tape flanges, or apply a liberal bead of RLA Max SMP 25 sealant around the base.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eStatic Cracks (1mm to 6mm) and Screw Holes:\u003c\/strong\u003e Clean out loose material, fill flush with RLA Max SMP 25, and overlay with RLA Waterproofing Bandage, Elastoproof B50, or BRW PF Tape.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDo not apply to areas when rain is imminent.\u003c\/li\u003e\n \u003cli\u003eDo not apply when the surface temperature is below 5°C or above 30°C.\u003c\/li\u003e\n \u003cli\u003eDo not use in areas subject to negative hydrostatic pressure.\u003c\/li\u003e\n \u003cli\u003eAll finish coatings and toppings applied over this membrane must be solvent-free.\u003c\/li\u003e\n \u003cli\u003eWhen tiling directly over the cured membrane, you must use polymer-modified cement-based adhesives such as \u003ca href=\"\/products\/gripset-c-lite-tile-adhesive\"\u003eGripset C-LITE\u003c\/a\u003e, C-MASTIC, or C-RUBBER.\u003c\/li\u003e\n \u003cli\u003eIf applying a screed, render, or concrete topping over the membrane, \u003ca href=\"\/products\/gripset-11y\"\u003eGripset 11Y\u003c\/a\u003e must be incorporated into the mix as a bonding agent.\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Gripset","offers":[{"title":"Default Title","offer_id":46158075723968,"sku":"GRIPP39GREY\/15","price":232.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/gripset-p39-fibre-waterproofing-membrane-roofs-adheseal.png?v=1763709354"},{"product_id":"everflex-wpuv-hv-high-viscosity-uv-membrane","title":"Everflex HVUV Elastomeric Waterproof Membrane","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor external roof decks, balconies, and internal wet areas complying with AS-4858:2004 and AS4654.1:2012, Everflex HVUV Elastomeric Waterproof Membrane is a single-component, micro-fibre reinforced membrane formulated for exposed UV applications. It cures to form a seamless, fully bonded barrier that resists biological growth and does not re-emulsify when subjected to continuous water immersion.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverflex HVUV uses a single-pack, water-based acrylic-styrene and polyurethane co-polymer chemistry reinforced with micro-fibres to achieve Class III high permanent flexibility. This high elasticity allows the cured membrane to accommodate structural movement without cracking. The formulation is self-reinforced, meaning it can span standard transitions without fabric reinforcement, though WPUV cannot span open gaps and requires a neutral-cure sealant fillet or joint band over active joints. Once cured, it is stable under continuous exposure to UV light and weathering, and it can withstand maintenance foot traffic without an additional protective screed.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass III Elongation:\u003c\/strong\u003e High permanent flexibility designed to accommodate substrate movement without rupture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0mm Minimum DFT (Internal):\u003c\/strong\u003e The minimum dry film thickness required across internal applications to meet waterproofing standards, typically requiring 1.5 litres per square metre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.3mm Minimum DFT (External):\u003c\/strong\u003e The minimum dry film thickness required to ensure long-term UV and weathering protection on exposed external areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.2g\/m²\/24h Permeability:\u003c\/strong\u003e Low moisture vapour transmission rate to prevent passage of water through the cured film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 Hours Cure Time:\u003c\/strong\u003e Required drying time at 25°C and 50% relative humidity before tiling or finishing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eSuitable for installation over the following prepared substrates:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete cured for a minimum of 28 days.\u003c\/li\u003e\n\u003cli\u003e3:1 sand cement screeds, C-Bed engineered screeds, and masonry or render cured for at least 4 days.\u003c\/li\u003e\n\u003cli\u003eCement sheeting, underlay, external weatherboard, and blue board.\u003c\/li\u003e\n\u003cli\u003ePre-cast concrete with all release agents fully removed or dissipated.\u003c\/li\u003e\n\u003cli\u003eWet area plasterboard and Villaboard.\u003c\/li\u003e\n\u003cli\u003eTimber flooring including structural plywood Type A (PAA JAS-ANZ).\u003c\/li\u003e\n\u003cli\u003eBrickwork and Hebel aggregate blocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommon applications include exposed roofs, pedestal system sub-floors, shower recesses, laundries, toilets, kitchens, patios, terraces, decks, balconies, and under-tile installations.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply if the ambient or substrate temperature is below 10°C or above 35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply on damp, wet, or contaminated substrates, or if rain is imminent.\u003c\/li\u003e\n\u003cli\u003eNot suitable for structures subject to negative hydrostatic pressure or rising damp.\u003c\/li\u003e\n\u003cli\u003eNot suitable for traffic areas subjected to regular foot traffic heavier than standard maintenance access.\u003c\/li\u003e\n\u003cli\u003eLight Grey has a Solar Reflectance Index (SRI) of approximately 0.32; adding up to 75ml of black Glycol tint will alter the colour and reduce this SRI rating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and system components\u003c\/h3\u003e\n\u003cp\u003eAll surfaces must be clean, dry, and free from protrusions, release agents, curing compounds, or dust. Non-structural cracks and holes must be filled prior to application. Apply a fillet of Adheseal Hi-Flex MS sealant to all internal corners and sheet joints. Floor wastes and puddle flanges must be rebated into the floor and sealed with Hi-Flex MS sealant.\u003c\/p\u003e\n\u003cp\u003eFor internal priming, use Everflex WBP. For external balconies and roof decks, prime with \u003ca href=\"\/products\/everflex-vbs\"\u003eEverflex VBS\u003c\/a\u003e. Apply the membrane within 2 to 24 hours of the primer becoming touch-dry.\u003c\/p\u003e\n\u003cp\u003eMix Everflex HVUV thoroughly before application. Apply the first coat with a brush or roller at approximately 0.75mm wet film thickness (WFT). Once dry, apply the second coat at a right angle to the first at 0.75mm WFT. Verify the wet film thickness during application using a WFT gauge to ensure the target dry film thickness (1.0mm internal \/ 1.3mm external) is achieved. For additional UV and mechanical protection, the membrane can be coated with LS slip-resistant UV protective coating.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":46158254604480,"sku":"HVUV\/15","price":177.02,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everflex-hvuv-waterproofing-membrane-balconies-adheseal.png?v=1763709693"},{"product_id":"fatrabond-1214-roller-applied-polyurethane-adhesive-20l","title":"Fatrabond 1214 Roller Applied Polyurethane Adhesive 20L","description":"\u003cdiv class=\"quick-specs\"\u003e\n  \u003cspan class=\"spec\"\u003e\u003cstrong\u003eUse Fatrabond 1214 MCPU Adhesive for:\u003c\/strong\u003e Bonding Fatrafol felt-backed roof membranes to concrete, fibre strand boards, plywood, insulation boards, and steel panels.\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003e\n    Fatrabond 1214 MCPU Adhesive is the go-to solution for Australian tradespeople needing a reliable and efficient adhesive for felt-backed roofing membranes. Its single-sided application and rapid hardening properties streamline the installation process, saving time and reducing project costs. With its high strength adhesion and resistance to blistering, Fatrabond 1214 ensures a long-lasting, high-quality roofing system.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eKey Features of Fatrabond 1214 MCPU Adhesive\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eHigh Strength Adhesion:\u003c\/strong\u003e Bonds strongly to a wide range of substrates.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eSingle-Sided Application:\u003c\/strong\u003e Simplifies the application process.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eRapid Hardening:\u003c\/strong\u003e Speeds up project completion.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eResistance to Blistering:\u003c\/strong\u003e Ensures a smooth, durable finish.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eSolvent-Free Formulation:\u003c\/strong\u003e Environmentally friendly and safe to use.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTechnical Overview\u003c\/h3\u003e\n  \u003cp\u003e\n    Fatrabond 1214 is a moisture-curing polyurethane-based adhesive with a liquid consistency and blue appearance. Its formulation is designed to provide excellent bond strength and rapid hardening, making it suitable for demanding roofing applications.\n  \u003c\/p\u003e\n  \u003cp\u003e\n    \u003cstrong\u003eChemical Properties:\u003c\/strong\u003e Polyurethane-based, moisture-curing adhesive.\n  \u003c\/p\u003e\n  \u003cp\u003e\n    \u003cstrong\u003eApplication Temperature Range:\u003c\/strong\u003e 5 °C to 30 °C (41 °F to 86 °F).\n  \u003c\/p\u003e\n\n  \u003ch3\u003eApplication Information\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eRequired Tools:\u003c\/strong\u003e Roller, heavy-duty (40-50 kg) roller.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eTrade-Specific Tips:\u003c\/strong\u003e Ensure surfaces are clean and dry. Apply adhesive evenly and roll out any air pockets with a heavy-duty roller. For porous surfaces, a second coat may be necessary.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eCommon Issues and Solutions:\u003c\/strong\u003e If adhesive dries for over 15 minutes, recoat the area. Ensure proper rolling to prevent air entrapment.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eStorage and Shelf Life\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStorage Requirements:\u003c\/strong\u003e Store in original, unopened packaging in a dry place, not exceeding 30 °C.\u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eShelf Life Information:\u003c\/strong\u003e 9 months.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eTemperature Considerations:\u003c\/strong\u003e Avoid storing in temperatures above 30 °C.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fatra","offers":[{"title":"Default Title","offer_id":46111276761280,"sku":"FATRABOND1214\/20","price":936.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/fatrabond-1214-roller-applied-roofing-adhesive-adheseal.jpg?v=1763712020"},{"product_id":"fatrafol-807v-reinforced-waterproofing-membrane","title":"Fatrafol 807v Reinforced Waterproofing Membrane","description":"\u003cdiv class=\"product-description\"\u003e\n    \u003cp\u003eFatrafol 807v is a premium, reinforced PVC (PVP-P based) waterproofing membrane featuring a non-woven PES-textile backing (120g\/m²). This UV-resistant membrane is specifically designed for adhered roofing systems, providing a durable and reliable waterproof layer.  Fatrafol 807v is ideal for various roofing applications and must be installed by specialized, trained professionals.\u003c\/p\u003e\n\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003eReinforced PVC membrane with non-woven PES-textile backing\u003c\/li\u003e\n        \u003cli\u003eUV resistant\u003c\/li\u003e\n        \u003cli\u003eDesigned for adhered roofing systems\u003c\/li\u003e\n        \u003cli\u003eSuitable for cold temperature installation (down to -5°C)\u003c\/li\u003e\n        \u003cli\u003eOne edge without non-woven textile for longitudinal band joining\u003c\/li\u003e\n        \u003cli\u003eMeets EN 13956 standard\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eTechnical Overview\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eKey Performance Data:\u003c\/strong\u003e Meets EN 13956. Consult Fatra for specific performance data. Samples meet requirements at 60 kPa pressure.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eChemical Properties:\u003c\/strong\u003e PVP-P based PVC. Consult Fatra for detailed chemical properties and compatibility.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range:\u003c\/strong\u003e Up to -5°C.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eTrade Professional Information\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eRequired Tools:\u003c\/strong\u003e Hot air welding equipment, tools for single-ply membrane installation, specialized tools for adhesive application (if applicable).\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTrade-Specific Tips:\u003c\/strong\u003e Installation must be carried out by specialized, trained installers according to Fatra's Construction and Technologic Instruction. Ensure proper substrate preparation, adhesive selection (if applicable), and welding techniques.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eCommon Issues and Solutions:\u003c\/strong\u003e Adhere to Fatra's guidelines for jointing and detailing. Ensure proper storage and handling of materials. Avoid adhesion to bitumen surfaces.\u003c\/li\u003e\n   \n    \u003c\/ul\u003e\n\n    \u003ch3\u003eStorage and Shelf Life\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eStorage Requirements:\u003c\/strong\u003e Store in original closed packing on wooden pallets, protected by packing film.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eShelf Life Information:\u003c\/strong\u003e Consult Fatra.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTemperature Considerations:\u003c\/strong\u003e Recommended storage temperature: -5°C to +30°C. Protect from weathering influences until processing.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eCertifications\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003eMeets EN 13956 standard. Manufacturing control system certificate No. 1390-CPD-0028\/07\/Z.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eRelated Products\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003eFatrafol 804 membrane (for details)\u003c\/li\u003e\n        \u003cli\u003eSuitable polyurethane adhesives (for adhered systems)\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fatra","offers":[{"title":"1.5mm x 20m x 2.05m","offer_id":46111358976192,"sku":"FATRA807V\/1.5X20X2.05","price":1739.22,"currency_code":"AUD","in_stock":true},{"title":"2mm x 15m x 2.05m","offer_id":46111359008960,"sku":"FATRA807V\/2X15X2.05","price":1674.64,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/fatrafol-807v-reinforced-waterproofing-roofing-adheseal.jpg?v=1763712020"},{"product_id":"fatrafol-810v-reinforced-pvc-roofing-membrane","title":"Fatrafol 810v Reinforced PVC Roofing Membrane","description":"\u003cp\u003eFatrafol 810v is a robust, reinforced PVC roofing membrane engineered for single-ply flat roofing applications. This UV-resistant membrane is mechanically anchored and designed for exceptional durability and weather resistance. Fatrafol 810v is ideal for a variety of roofing projects and must be installed by specialized, trained professionals.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced PVC membrane with polyester grid\u003c\/li\u003e\n\u003cli\u003eUV resistant\u003c\/li\u003e\n\u003cli\u003eMechanically anchored installation\u003c\/li\u003e\n\u003cli\u003eSuitable for cold temperature installation (down to -5°C)\u003c\/li\u003e\n\u003cli\u003eMeets EN 13956 standard\u003c\/li\u003e\n\u003cli\u003eProduced by multi-extrusion processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Performance Data:\u003c\/strong\u003e Meets EN 13956. Consult Fatra for specific performance data. Membranes meet test pressure of 60 kPa. Achieved AA rating according to BS 476-3:1958.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Properties:\u003c\/strong\u003e PVC-P based. Consult Fatra for detailed chemical properties and compatibility. Not compatible with bitumen; requires protection layer if exposed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range:\u003c\/strong\u003e Up to -5°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTrade Professional Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Tools:\u003c\/strong\u003e Hot air welding equipment, specialized tools for single-ply membrane installation, mechanical anchoring equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade-Specific Tips:\u003c\/strong\u003e Installation must be carried out by specialized, trained installers according to Fatra's Construction and Technologic Instruction. Ensure proper substrate preparation, anchoring selection, and welding techniques. Consider wind suction and dimensional changes during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Issues and Solutions:\u003c\/strong\u003e Adhere to Fatra's guidelines for jointing and detailing. Ensure proper storage and handling of materials. Protect from bitumen contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage and Shelf Life\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Requirements:\u003c\/strong\u003e Store in original closed packing on wooden pallets, protected by packing film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life Information:\u003c\/strong\u003e Consult Fatra.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Considerations:\u003c\/strong\u003e Recommended storage temperature: -5°C to +30°C. Protect from weathering influences until processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCertifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeets EN 13956 standard. Manufacturing control system certificates No. 1390-CPD-0028\/07\/Z and 1390-CPD-0033\/06\/Z.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFatrafol 804 membrane (for details)\u003c\/li\u003e\n\u003cli\u003eMechanical anchoring elements\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fatra","offers":[{"title":"1.5mm x 20m x 2.05m","offer_id":46111371395264,"sku":"FATRA810V\/1.5X20X2.05","price":1511.42,"currency_code":"AUD","in_stock":true},{"title":"2mm x 15mm x 2.05m","offer_id":46111371428032,"sku":"FATRA810V\/2X15X2.05","price":1504.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/fatrafol-810v-reinforced-waterproofing-flat-roofs-adheseal.jpg?v=1763712020"},{"product_id":"gripset-xpress-multi-pro","title":"Gripset Xpress Multi Pro Membrane","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor external surfaces and internal wet areas where rain washouts, early ponding, or slow drying times threaten the installation schedule, Xpress Multi Pro Membrane provides a fast-curing, water-based waterproofing barrier. It complies with AS 4858 and AS 4654.2, allowing rapid progression to subsequent trades on roofs, balconies, and internal bathrooms without the hazards of solvent-based polyurethane systems.\u003c\/p\u003e\n\n \u003ch3\u003eHow it works\u003c\/h3\u003e\n \u003cp\u003eXpress Multi Pro Membrane uses rapid-drying technology to form a rain-resistant finish within 3 hours. It withstands early ponding water and permanently wet conditions without blistering or re-emulsifying. This water-based, solvent-free formulation exhibits high elasticity to bridge joints and junctions under constant weathering, preventing moisture ingress into sub-floor structures.\u003c\/p\u003e\n \u003cp\u003eFor projects with critical handovers, using this membrane alongside Xpress Primer H2O Plus allows fast priming over green concrete or damp mineral substrates containing residual moisture.\u003c\/p\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eRoofs:\u003c\/strong\u003e Suitable as an exposed, light-foot-trafficable membrane finish, or to be covered over with screeds and toppings.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eExternal structures:\u003c\/strong\u003e Balconies, decks, podiums, terrace floors, and parapets exposed to constant weather and UV.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInternal wet areas:\u003c\/strong\u003e Bathrooms, laundries, and general tiled areas to prevent moisture ingress.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible substrates:\u003c\/strong\u003e Concrete, render, masonry, compressed fibre cement sheeting, plasterboard, wet area timber sheeting, external grade plywood, and aerated concrete panels or blocks.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e3-hour rain resistance:\u003c\/strong\u003e The membrane resists early washouts and early ponding water within 3 hours of application under normal conditions (23°C and 50% RH).\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1 to 2-hour recoat window:\u003c\/strong\u003e Allows multi-coat applications to proceed quickly on-site to build required film thickness.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e24-hour full cure:\u003c\/strong\u003e Safe for flood testing or tiling over within 24 hours under standard drying conditions.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e\u0026gt;300% Elongation (Class III, AS 1145.3):\u003c\/strong\u003e High elasticity to accommodate structural movement without cracking or tearing the cured film.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e\u0026gt;1MPa Tensile Strength (AS 1145.3):\u003c\/strong\u003e Mechanical resistance to withstand light foot traffic and subsequent topping installations.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e6g\/m²\/24 hours Water Vapour Transmission (ASTM E96):\u003c\/strong\u003e Low vapour permeability to restrict moisture vapour moving through the substrate.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eRequired coverage\u003c\/h3\u003e\n \u003cp\u003eAlways verify wet film thickness during application using a wet film gauge to ensure compliance with the following minimum performance floors:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eUnder-tile applications:\u003c\/strong\u003e Minimum of 2 coats at a total coverage of 1.5 litres\/m² to achieve a minimum 0.8mm dried film thickness (DFT).\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eExposed, trafficable membrane:\u003c\/strong\u003e Minimum of 3 coats at a total coverage of 2.0 litres\/m² to achieve a minimum 1.0mm dried film thickness (DFT).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSubstrate preparation and priming\u003c\/h3\u003e\n \u003cp\u003eAll surfaces must be clean, sound, dry, and free of laitance, curing compounds, and contaminants. Grind or abrasive-blast structurally unsound layers. Concrete must cure for 28 days; cement renders and screeds must cure for 7 days. Select and apply the appropriate primer before membrane installation:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePorous\/absorbent surfaces:\u003c\/strong\u003e \u003ca href=\"\/products\/gripset-gp-general-purpose-primer\"\u003eGripset GP Primer\u003c\/a\u003e applied at 1 litre per 8–10m².\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNon-porous surfaces:\u003c\/strong\u003e \u003ca href=\"\/products\/gripset-op-primer\"\u003eGripset OP Primer\u003c\/a\u003e applied at 1 litre per 12m².\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGreen\/damp surfaces with residual moisture:\u003c\/strong\u003e Xpress Primer H2O Plus applied at 1 litre per 8m².\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRising damp (\u0026gt;80% RH ASTM F2170 or \u0026gt;5% moisture ASTM F2659):\u003c\/strong\u003e \u003ca href=\"\/products\/gripset-e60\"\u003eGripset E60\u003c\/a\u003e applied in 1–2 coats at 1 litre per 3m² per coat.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eDetailing and joint preparation\u003c\/h3\u003e\n \u003cp\u003eAll joints, junctions, movement zones, penetrations, and cracks must be sealed prior to membrane application:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBond breakers (AS 3740 \u0026amp; AS 4654.1):\u003c\/strong\u003e Install \u003ca href=\"\/products\/elastoproof-b50\"\u003eElastoproof B50\u003c\/a\u003e Joint Band embedded into a wet first coat of membrane, lay BRW PF Tape centrally over the joint, or install a sealant fillet using RLA Max SMP 25.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePipes and penetrations:\u003c\/strong\u003e Fit Elastoproof Collars into the wet membrane, construct flanges using BRW PF Tape, or apply a bead of RLA Max SMP 25 sealant.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eStatic cracks (1mm to 6mm) and screw\/nail holes:\u003c\/strong\u003e Clean, fill flush with RLA Max SMP 25, and overlay with RLA Waterproofing Bandage, Elastoproof B50 Joint Band, or BRW PF Tape.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eTiling and topping integration\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDirect tiling:\u003c\/strong\u003e Must be performed using polymer-modified cement-based adhesives such as \u003ca href=\"\/products\/gripset-c-lite-tile-adhesive\"\u003eGripset C-Lite\u003c\/a\u003e, C-Mastic, or C-Rubber. Tiling must comply with AS 3958.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eScreeds and toppings:\u003c\/strong\u003e Incorporate \u003ca href=\"\/products\/gripset-11y\"\u003eGripset 11Y\u003c\/a\u003e as a bonding agent and water-resistant additive in the mix, or use \u003ca href=\"\/products\/gripset-c-bed\"\u003eGripset C-Bed\u003c\/a\u003e engineered screed.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDo not apply to areas when rain is imminent.\u003c\/li\u003e\n \u003cli\u003eDo not apply when the surface temperature is below 5°C or above 30°C.\u003c\/li\u003e\n \u003cli\u003eDo not use in areas where solvent or petroleum-based products may be spilled.\u003c\/li\u003e\n \u003cli\u003eDo not use in areas subject to negative hydrostatic pressure.\u003c\/li\u003e\n \u003cli\u003eAll finish coatings applied over this membrane must be solvent-free.\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Gripset","offers":[{"title":"Default Title","offer_id":46558574543040,"sku":"GRIPMULTIPRO\/15","price":389.93,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/XpressMultiPro.png?v=1754646344"}],"url":"https:\/\/adheseal.com.au\/collections\/roofing-install-membrane.oembed","provider":"Adheseal","version":"1.0","type":"link"}