{"title":"Non-Porous Substrate Primers","description":null,"products":[{"product_id":"50a-primer","title":"Adheseal Primer 50A","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor high-liability installations on non-porous substrates where maximum performance and longevity are required, Primer 50A is a fast-drying adhesion promoter. This clear alcohol solution is a single-pack, ready-to-use wipe that prepares difficult-to-bond surfaces for Polyurethane, MS, Silicone, and acrylic sealants and adhesives.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003ePrimer 50A functions by evaporation, leaving a microscopic layer that enhances chemical bonding between the substrate and the adhesive or sealant. When applied very sparingly with a clean cloth, it dries in 15 seconds. If the primer does not dry almost immediately, it has been applied too heavily.\u003c\/p\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eThis primer is suitable for internal and external applications on non-porous substrates, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlass and porcelain\u003c\/li\u003e\n\u003cli\u003eAluminium, powder coat, and metals (except Lead and Copper)\u003c\/li\u003e\n\u003cli\u003ePlastics, acrylic, and polycarbonate\u003c\/li\u003e\n\u003cli\u003eFibreglass and rubber\u003c\/li\u003e\n\u003cli\u003eStone and ceramic tiles\u003c\/li\u003e\n\u003cli\u003ePainted surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is commonly used in sign manufacturing, caravan assembly, marine fabrication, and automotive manufacturing and repair.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15 seconds: the final drying time when applied very sparingly to clean surfaces.\u003c\/li\u003e\n\u003cli\u003e+5°C to +40°C: the acceptable temperature range for both the air and substrate during application.\u003c\/li\u003e\n\u003cli\u003e12 months: the product shelf life when stored in its original packaging between 10°C and 35°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use on porous surfaces. If dispensed water absorbs into the substrate in under two minutes, the surface is porous; use Adheseal \u003ca href=\"\/products\/2001-primer\"\u003e2001 primer\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003eDo not use if the liquid has become milky. A milky white appearance indicates the primer has absorbed water and must be disposed of.\u003c\/li\u003e\n\u003cli\u003eDo not use on lead or copper.\u003c\/li\u003e\n\u003cli\u003eDo not expose the primed surface to thermal, mechanical, or chemical influences before the product has dried completely.\u003c\/li\u003e\n\u003cli\u003eUse only in well-ventilated spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAll surfaces must be structurally sound, dry, clean, and free of dust, oils, grease, curing compounds, and other contaminants. Clean the surface with \u003ca href=\"\/products\/i-p-a-cleaner\"\u003eAdheseal IPA cleaner\u003c\/a\u003e prior to priming. Wipe Primer 50A over the area very sparingly with a clean cloth.\u003c\/p\u003e\n\u003cp\u003eFor extremely non-porous surfaces, such as powder coat, lightly abrade the substrate and clean with Adheseal IPA cleaner before applying the primer to ensure a reliable bond. Carry out preliminary adhesion tests prior to full application. Wet tools and spills can be cleaned with IPA cleaner while the primer is still wet.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":46183856013504,"sku":"PRIME50A\/1","price":53.03,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/primer-50a-adhesion-promoter-sealant-adheseal.png?v=1763706888"},{"product_id":"autoshield-gb-primer","title":"Autoshield GB Autoglass Primer","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor pre-treating auto glass and vehicle body bond faces before applying Adheseal Autoshield 1-FC single-component polyurethane, Autoshield GB Autoglass Primer provides a secure bond link and critical UV blockout protection. This solvent-based black primer reacts with atmospheric moisture to form a thin, receptive layer that chemically bridges the substrate and the adhesive.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eUpon application, the polyurethane-based solution forms a physical and chemical barrier on the substrate. To assist with quality control on busy production lines, the formula contains a luminescent agent that fluoresces under long-wave UV light (320 to 420 nm). This allows installers to visually verify complete, continuous coverage before adhesive application. Note that this luminescent effect degrades over time and is best inspected under reduced ambient light.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 minutes to 24 hours:\u003c\/strong\u003e The flash-off window above 5 °C, determining when the adhesive must be applied after priming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 ml\/m²:\u003c\/strong\u003e The standard coverage rate, which varies depending on the porosity of the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e27%:\u003c\/strong\u003e Solid content, ensuring a thin but adequately dense black blockout barrier in a single application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eThis primer is formulated to improve adhesion across a wide selection of automotive substrates, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFloat glass and ceramic-coated glass\u003c\/li\u003e\n\u003cli\u003ePre-coatings, painted surfaces, and Ecoats\u003c\/li\u003e\n\u003cli\u003eMetals and various plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional use only:\u003c\/strong\u003e This product is suitable for experienced professional users only. Pre-testing with actual substrates and conditions is required to verify adhesion and compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelow 5 °C:\u003c\/strong\u003e If application is required below 5 °C, further testing under expected service conditions is mandatory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture sensitivity:\u003c\/strong\u003e The formula is highly moisture-reactive. Keep the container tightly sealed with the inner plastic liner immediately after each use. Discard the primer immediately if you observe gelling, separation, or a significant viscosity increase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life after opening:\u003c\/strong\u003e Dispose of the product one month after opening if used frequently, or after two months if used infrequently. For 100 ml pack sizes, dispose of the product two weeks after opening. Stix and tubes are restricted to a single application only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo dilution:\u003c\/strong\u003e Never dilute or mix this product with any other substances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStress cracking:\u003c\/strong\u003e Do not use on materials prone to stress cracking without first seeking manufacturer advice and conducting tests on original substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV protection:\u003c\/strong\u003e Adequate UV protection is mandatory when using this product on transparent or translucent substrates such as float glass and plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eSurfaces must be completely clean, dry, and free of grease, oil, dust, and general contaminants. Adhesion can be further enhanced by incorporating pre-treatment steps such as scuffing, cleaning, and activating.\u003c\/p\u003e\n\u003cp\u003eShake the can thoroughly until the mixing ball rattles freely, and then continue shaking for one full minute. Apply a single, thin, but covering coat using a brush, felt, or foam applicator. The ideal application and surface temperature range is between 15 °C and 25 °C. Ensure the single application achieves an adequately dense, opaque coverage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":37551509668032,"sku":"PRIMEGB\/250","price":56.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/autoshield-gb-primer-pu-autoglass-adhesive-adheseal.png?v=1763708266"},{"product_id":"autoshield-activator","title":"Adheseal Autoshield Activator","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor automotive and industrial glazing jobs where polyurethane adhesives must bond reliably to smooth, non-porous surfaces, Autoshield Activator AP1001 prepares the substrate to prevent adhesive failure. This clear wipe-on adhesion promoter chemically alters the surface energy of glass and lacquer to secure a strong bond with polyurethane adhesives.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eAutoshield Activator AP1001 acts as a surface-preparation treatment that ensures polyurethane adhesives adhere tightly to challenging substrates like glass and lacquer. Applied very sparingly, the clear fluid leaves an active film that links the substrate to the incoming adhesive. While the activator remains clear, it is stable and fit for purpose; any change in appearance indicates the chemistry has been compromised.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use if the liquid in the container has turned milky, as this indicates the activator has absorbed moisture and is no longer effective.\u003c\/li\u003e\n\u003cli\u003eDo not expose the treated area to thermal, mechanical, or chemical influences before the surface is completely dry.\u003c\/li\u003e\n\u003cli\u003eAvoid application outside the temperature window of +5°C to +40°C.\u003c\/li\u003e\n\u003cli\u003eThe product is classified as hazardous according to Worksafe Australia and must only be used in well-ventilated spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePreparation and application\u003c\/h3\u003e\n\u003cp\u003eEnsure all substrates are clean, dry, and entirely free from grease, dust, or contaminants. Apply Autoshield Activator AP1001 very sparingly using a clean applicator, rag, lint-free cloth, or tissue. Because surface coatings and glass compositions vary, always carry out adhesion tests prior to full application to confirm suitability for your specific substrate. To clean tools or remove wet and dry residue from surfaces, use a solvent or alcohol-based cleaner.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Single Buy","offer_id":46349642006720,"sku":"PRIMEAUTOA\/1","price":48.66,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (12)","offer_id":46641071096000,"sku":"PRIMEAUTOA\/1\/BOX","price":525.48,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/autoshield-activator-autoglass-primer-adheseal.png?v=1763709354"},{"product_id":"gripset-xpress-sp-rapid-set-primer","title":"Gripset Xpress SP Primer","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor high-adhesion priming on non-porous, dense, and smooth substrates where standard absorbing primers cannot bond, Gripset Xpress SP Primer provides a solvent-free alternative to hazardous solvent-based systems. It is formulated to enable the direct application of Gripset self-adhesive sheet and liquid membrane systems over challenging wall and floor surfaces without the need for chemical etching or grinding.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eXpress SP Primer creates a high-strength physical key over smooth substrates, achieving mechanical adhesion over glazed ceramic tiles, vitrified tiles, natural stone, and metals without modifying the substrate surface. It dries to a non-tacky, low-dirt-retention finish that prevents contamination before the membrane or adhesive layer is applied. Because the formula has nil VOC content, it meets the requirements of Green Star Rating tools for multi-unit residential, commercial, and healthcare developments.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-minute dry time:\u003c\/strong\u003e Fast-drying window at 23°C and 50% relative humidity, allowing rapid progression to the membrane application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.83 MPa adhesion to glazed tiles:\u003c\/strong\u003e Verified bond strength directly to glazed surfaces, eliminating the need for mechanical etching or chemical profiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8 MPa adhesion to James Hardie Scyon:\u003c\/strong\u003e Reliable structural bond directly to Scyon Secura external and internal flooring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Litre per 12m² minimum coverage:\u003c\/strong\u003e Direct coverage rate on smooth, non-porous surfaces such as metal, glass reinforced concrete, and glazed tiles. Porous or highly absorbent substrates may require up to 1 Litre per m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eSuitable for commercial, industrial, and residential applications on both walls and floors. Compatible substrates include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetals including galvanised iron, zincalume, aluminium, stainless steel, copper, brass treated steel, and colorbond sheeting.\u003c\/li\u003e\n\u003cli\u003eExisting ceramic tiles, vitrified tiles, natural stone, and glazed surfaces.\u003c\/li\u003e\n\u003cli\u003ePrecast concrete, tilt-up concrete, and glass reinforced concrete.\u003c\/li\u003e\n\u003cli\u003eJames Hardie Scyon Secura external and internal flooring.\u003c\/li\u003e\n\u003cli\u003eHardwood, dense timber surfaces, marine plywood, and timber sheet surfaces.\u003c\/li\u003e\n\u003cli\u003eBrickwork (clay and concrete), compressed cement sheeting, and plasterboard.\u003c\/li\u003e\n\u003cli\u003ePolymer mortars, synthetic mortars, and smooth self-levelling compounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use as a primer in areas subject to rising moisture or negative hydrostatic pressure.\u003c\/li\u003e\n\u003cli\u003eDo not use in immersed applications such as pools or water tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and surface preparation\u003c\/h3\u003e\n\u003cp\u003eAll substrates must be structurally sound, smooth, stable, dry, clean, and free from loose material, de-bonded coatings, curing compounds, release agents, laitance, or grease. Structurally unsound layers must be mechanically removed by grinding, abrasive blasting, or blast tracking.\u003c\/p\u003e\n\u003cp\u003eStir the primer thoroughly before application. Apply an even coat using a low-nap roller or a long-bristle brush. For spray application parameters, contact Gripset Technical Services. Clean up tools with water while the primer is wet; once dry, the product must be removed mechanically or with a solvent.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Gripset","offers":[{"title":"Default Title","offer_id":43822340178112,"sku":"PRIMEGRIPSP\/10","price":298.34,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/gripset-xpress-sp-rapid-primer-waterproofing-adheseal.png?v=1763709693"},{"product_id":"gripset-op-primer","title":"Gripset OP Primer","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor waterproofing and tiling installations where adhesion to metal flashings, rigid PVC leak control flanges, ceramic tiles, or smooth concrete is required, OP Primer provides a solvent-free bonding bridge. It establishes a secure grip on difficult, non-porous surfaces to prevent Gripset membranes and tile adhesives from peeling or de-bonding over time.\u003c\/p\u003e\n\u003ch3\u003eHow it builds adhesion\u003c\/h3\u003e\n\u003cp\u003eOP Primer dries to a textured, non-tacky finish that creates a mechanical key on smooth substrates. This surface texture gives the subsequent membrane, tile adhesive, or polymer coating a high-friction physical bond, bypassing the need for aggressive solvent-based primers or hazardous etching chemicals. The water-based formulation is low-VOC and dries to a distinct blue colour, allowing installers to easily verify full, uniform coverage across the substrate.\u003c\/p\u003e\n\u003ch3\u003eSubstrate compatibility\u003c\/h3\u003e\n\u003cp\u003eThis primer is formulated for application over dry, interior and exterior substrates, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal flashings and waterstops used in waterproofing applications\u003c\/li\u003e\n\u003cli\u003eConcrete and glass reinforced concrete\u003c\/li\u003e\n\u003cli\u003eExisting ceramic tiles and natural stone\u003c\/li\u003e\n\u003cli\u003eCompressed fibre cement sheeting, including James Hardie Scyon Secura external and internal flooring\u003c\/li\u003e\n\u003cli\u003eRigid PVC leak control flanges, waterstops, and pipe penetrations\u003c\/li\u003e\n\u003cli\u003eApproved polymer coatings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over damp substrates, substrates with elevated residual moisture, or areas subject to rising damp and active moisture (treat these areas with \u003ca href=\"\/products\/gripset-e60\"\u003eGripset E60\u003c\/a\u003e instead).\u003c\/li\u003e\n\u003cli\u003eDo not use for priming areas subject to rising moisture or negative hydrostatic pressure.\u003c\/li\u003e\n\u003cli\u003eNot suitable for immersed applications.\u003c\/li\u003e\n\u003cli\u003eOP Primer is not a substitute for a mandatory waterproof membrane system when tiling over existing tiles in internal or external wet areas; it must be covered with an approved under-tile membrane.\u003c\/li\u003e\n\u003cli\u003eNot suitable for applications where solvent-based adhesives, coatings, or paints are applied directly over the cured primer.\u003c\/li\u003e\n\u003cli\u003eDo not apply when ambient or surface temperatures are below 5°C or above 35°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-minute dry time:\u003c\/strong\u003e Fast-drying formulation (at 23°C and 50% relative humidity) to minimise waiting times before overcoating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Litre per 10m² minimum coverage:\u003c\/strong\u003e The required application rate on smooth, non-porous surfaces to ensure consistent adhesion performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-month shelf life:\u003c\/strong\u003e Keep stored at room temperature, off concrete floors, and out of direct sunlight and freezing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and preparation\u003c\/h3\u003e\n\u003cp\u003eAll surfaces must be clean, structurally sound, dry, and free of dirt, dust, oils, release agents, laitance, curing compounds, and existing coatings. Unsound layers must be mechanically removed by grinding or abrasive blasting. Point masonry surfaces flush and fill any voids, holes, or non-structural cracks with \u003ca href=\"\/products\/gripset-11y\"\u003eGripset 11Y\u003c\/a\u003e enhanced repair mortar before priming.\u003c\/p\u003e\n\u003cp\u003eApply OP Primer neat. Do not dilute. Apply one coat by brush or medium nap roller until full coverage is achieved. The primer must be completely dry and tack-free before applying finishes. To avoid surface contamination, apply Gripset membranes, tile adhesives, or approved polymer coatings shortly after the primer has dried. Clean tools in water while the primer is still wet; dried product requires mechanical removal or solvent treatment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Gripset","offers":[{"title":"5 litres","offer_id":40294686884032,"sku":"PRIMEGRIPOP\/5","price":160.32,"currency_code":"AUD","in_stock":true},{"title":"15 litres","offer_id":40294922944704,"sku":"PRIMEGRIPOP\/15","price":283.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/gripset-op-15l-solvent-free-waterproofing-adheseal.png?v=1763709693"}],"url":"https:\/\/adheseal.com.au\/collections\/non-porous-substrate-primers.oembed","provider":"Adheseal","version":"1.0","type":"link"}