{"title":"Manufacturing Range","description":"\u003cp\u003eMaterials and gear for production and factory maintenance: aluminium angles for frames and edging, contact and PVA adhesives for panels and boards, cyanoacrylates and epoxies for machinery, epoxy barriers and wear linings for plant floors, plus guns, brushes, wipes, and rags.\u003c\/p\u003e","products":[{"product_id":"general-purpose-pva-everbond","title":"Everbond General Purpose PVA","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor cabinetry, shopfitting, and joinery applications requiring a sandable, non-staining timber bond, Everbond General Purpose PVA provides a reliable joint that cures to a hard, translucent film. This synthetic resin adhesive is formulated for standard workshop assembly, laminating, and veneering where high moisture resistance is not a primary requirement.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond General Purpose PVA cures through water dissipation and crosslinking under ambient conditions. The adhesive resists normal humidity cycles and inhibits the growth of mould, bacteria, and fungi. Full cure is achieved when the adhesive interphase reaches moisture equilibrium, which typically takes approximately seven days depending on timber density, moisture content, adhesive mass, and ambient conditions.\u003c\/p\u003e\n\u003cp\u003eFor specialized lines, water resistance can be increased and the cure accelerated by thermo-curing. This requires mixing Catalyst Number 1 at a rate of 1% w\/w before hot pressing.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e48\/50% solids content:\u003c\/strong\u003e Provides a stable resin density to minimize excessive shrinkage during water dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 to 140 g\/m² spread rate:\u003c\/strong\u003e The required adhesive coverage for surface bonding applications to ensure complete wet-out without excessive squeeze-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 to 180 g\/m² spread rate:\u003c\/strong\u003e The required adhesive coverage for structural assembly bonding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8°C minimum application temperature:\u003c\/strong\u003e The lowest allowable substrate and workshop temperature to ensure proper film formation and bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly bonding:\u003c\/strong\u003e Standard dowel, carcass, and general timber joinery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard joints and block bonding:\u003c\/strong\u003e Solid timber laminating and edge gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaminating and veneering:\u003c\/strong\u003e Surface gluing of decorative papers, timber veneers, and high-pressure laminates (HPL) to particle board or solid timber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePressing times and thermo-curing\u003c\/h3\u003e\n\u003cp\u003eMinimum pressing times vary by application and heating method:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gluing of decorative papers:\u003c\/strong\u003e From 10 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh frequency gluing (longitudinal heating):\u003c\/strong\u003e From 20 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gluing of high-pressure laminates in short-cycle presses (+70°C):\u003c\/strong\u003e From 60 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly bonding:\u003c\/strong\u003e 30 minutes under clamp pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard joints and block bonding:\u003c\/strong\u003e 45 minutes under clamp pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor hot-press thermo-curing (applicable for 1-2mm timber veneer to solid timber or particle board with 8-12% timber moisture), apply an adhesive spread rate of 150 to 200 g\/m² and press at 4 to 5 kp\/cm² for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30 seconds at 80°C, or\u003c\/li\u003e\n\u003cli\u003e30 seconds at 130°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot waterproof:\u003c\/strong\u003e Do not use in external applications, wet areas, or areas subject to water immersion. It is suitable only for normal dry interior humidity cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e Use within 6 months of manufacture when stored in original packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e Store indoors between 10°C and 30°C. Do not apply if the temperature is below 8°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and clean-up\u003c\/h3\u003e\n\u003cp\u003eEnsure the adhesive is completely homogenous before use. Clean all brushes, rollers, and glue baths with water immediately after use, before the adhesive dries. Once cured, the film can only be removed mechanically by sanding.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"5L","offer_id":37551470706880,"sku":"PVAGP\/5","price":60.48,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":46349646102720,"sku":"PVAGP\/20","price":166.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-pva-adhesive-timber-bonding-adheseal.jpg?v=1763706563"},{"product_id":"melamine-pva-adhesive-everbond","title":"Everbond Melamine PVA Adhesive","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor bonding melamine faced board and laminates in cabinet making and furniture construction, Everbond Melamine PVA Adhesive provides the high-solids adhesion required to join non-porous melamine surfaces to timber substrates without failing.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond Melamine PVA Adhesive is a high-solids PVA\/EVA-based adhesive that applies white and dries clear. It is formulated to bond difficult, non-porous melamine faces and laminates to wood-based materials. The formulation requires an exact mechanical fit between the mating surfaces; gaps between substrates will extend drying times and significantly reduce the final strength of the bond.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 g\/m² coverage rate:\u003c\/strong\u003e Provides the baseline material estimation for application planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e~3 minute open time:\u003c\/strong\u003e The narrow window available to assemble and align joints before the adhesive skin forms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 to 4 hours clamp time:\u003c\/strong\u003e Required press duration under standard conditions (20°C and 65% Relative Humidity) to achieve initial handling strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 to 48 hours full cure:\u003c\/strong\u003e The time required under standard conditions to achieve maximum bond strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKitchen cabinets and drawer assembly\u003c\/li\u003e\n\u003cli\u003eFurniture construction\u003c\/li\u003e\n\u003cli\u003eBonding melamine faced board to timber\u003c\/li\u003e\n\u003cli\u003eLaminate bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation limits\u003c\/h3\u003e\n\u003cp\u003eSurfaces must be clean and free from oil, dust, and other contaminants. Apply the adhesive evenly to one surface using a squeeze bottle or brush. The parts must be joined within the 3-minute open time and clamped or pressed until sufficient initial bond strength is achieved. For optimal bonding, timber moisture content should be between 8% and 10%, with ambient relative humidity between 60% and 70%.\u003c\/p\u003e\n\u003cp\u003eClean up wet adhesive and tools immediately with warm soapy water. Once dried, the adhesive cannot be dissolved and must be removed mechanically.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-structural only:\u003c\/strong\u003e This is a non-structural adhesive and must not be used for structural load-bearing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature minimum:\u003c\/strong\u003e Do not apply when substrate or ambient temperatures are below 10°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage limits:\u003c\/strong\u003e Store between 5°C and 40°C out of direct sunlight. Do not allow the product to freeze.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"5L","offer_id":37551471427776,"sku":"PVAMEL\/5","price":105.18,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":46349646069952,"sku":"PVAMEL\/20","price":310.56,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-melamine-pva-fast-clear-cabinetry-adheseal.jpg?v=1763706563"},{"product_id":"everbond-pva-xlink-3","title":"Everbond PVA Xlink 3","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions without requiring mixing.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond PVA Xlink 3 is a synthetic resin adhesive that cures through water dissipation and crosslinking. Under ambient conditions, it cures to a firm, highly water-resistant bond. Full cure is optimised when the adhesive interphase reaches moisture equilibrium, which typically takes seven days depending on timber density, substrate and adhesive mass, moisture content, and ambient conditions.\u003c\/p\u003e\n  \u003cp\u003eFor high-volume production, curing can be accelerated by hot pressing. Water resistance can be further increased by thermocuring after mixing Catalyst Number 1 at a rate of 1% w\/w.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e8°C minimum application temperature:\u003c\/strong\u003e The lower thermal limit for the adhesive to form a proper bond during application.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e48% to 50% solids content:\u003c\/strong\u003e High polymer concentration ensuring high bond strength and controlled shrinkage during water dissipation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e9,300 to 13,500 cP viscosity:\u003c\/strong\u003e A stable, medium-viscosity white liquid suitable for dowelling, assembly, and laminating.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive is suitable for assembly bonding, dowelling, laminating, and board joint or block bonding. Compatible substrates and materials include:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eAll timber species and solid timber\u003c\/li\u003e\n    \u003cli\u003eParticle board\u003c\/li\u003e\n    \u003cli\u003eTimber veneer\u003c\/li\u003e\n    \u003cli\u003eHigh-pressure laminates\u003c\/li\u003e\n    \u003cli\u003eDecorative papers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003ePress times and thermocuring\u003c\/h3\u003e\n  \u003cp\u003eMinimum pressing times vary by application method and temperature:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSurface gluing of decorative papers:\u003c\/strong\u003e From 10 seconds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh frequency gluing (longitudinal heating):\u003c\/strong\u003e From 20 seconds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSurface gluing of high-pressure laminates (+70°C short-cycle presses):\u003c\/strong\u003e From 60 seconds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAssembly bonding:\u003c\/strong\u003e 30 minutes\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBoard joint and block bonding:\u003c\/strong\u003e 45 minutes\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eFor veneering 1mm to 2mm timber veneer to solid timber or particle board (with timber moisture at 8% to 12%), the recommended thermocuring cycle is 30 seconds at 80°C followed by 30 seconds at 130°C. This requires an adhesive spread rate of 150 to 200 g\/m² and a pressure of 4 to 5 kp\/cm².\u003c\/p\u003e\n\n  \u003ch3\u003eApplication and limits\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAdhesive coverage rates:\u003c\/strong\u003e Apply at 80 to 140 g\/m² for surface bonding, and 160 to 180 g\/m² for assembly bonding.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Ensure the adhesive is completely homogenous before use.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClean-up:\u003c\/strong\u003e Wash out brushes, rollers, and glue baths with water before the adhesive dries.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStorage limits:\u003c\/strong\u003e Store indoors under ambient conditions between 10°C and 30°C. Keep containers closed when not in use. Shelf life is 6 months in original packaging.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"5L","offer_id":37551471526080,"sku":"PVAXL\/5","price":72.58,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":46349646004416,"sku":"PVAXL\/20","price":186.93,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-pva-xlink3-waterproof-wood-adhesive-adheseal.jpg?v=1763706563"},{"product_id":"sp-230-spray-contact-adhesive-everbond","title":"Everbond Spray Contact SP-230","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces, such as cover trims and edging profiles.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond Spray Contact SP-230 functions through contact bonding, requiring application to both mating surfaces. Once applied, the volatile solvents evaporate quickly during a short flash-off window. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, high-strength bond that resists both heat and water. The formulation is also resistant to ageing, preserving bond integrity over time in demanding environments like vehicle cabins and furniture upholstery.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e A short flash-off window that speeds up assembly and fabrication sequences.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6 to 8m² per litre consumption:\u003c\/strong\u003e Provides a predictable coverage rate for estimating material requirements across large surfaces.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application range:\u003c\/strong\u003e The allowable temperature window for applying the adhesive without compromising bond development.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive bonds a broad range of materials and is suitable for:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Timber, MDF, particleboard, rubber sheets, plastic laminates, leather, fabric, cloth-backed and polyester-backed vinyl, concrete, glass, and metal sheets.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransport vehicle assembly:\u003c\/strong\u003e Room temperature contact bonding of PUR foams and textiles to adjacent steps, wheel arches, seat brackets, and side walls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpholstery:\u003c\/strong\u003e Automotive and furniture upholstery applications, especially where high spring-back forces are present.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDo not apply in temperatures below +10°C; condensed water can form on the adhesive film and prevent a proper bond. For optimal performance, apply when the atmosphere, material, and adhesive are all at +20°C.\u003c\/li\u003e\n    \u003cli\u003eDo not apply excessive adhesive, allow it to pool, or join the substrates too early. Entrapped solvents will weaken the bond or cause blistering and complete bond failure.\u003c\/li\u003e\n    \u003cli\u003eAdhesion and compatibility must be verified by testing actual substrates and conditions prior to full-scale application.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003cp\u003eSurfaces must be clean, dry, and free of oils, grease, and loose or friable materials. Apply Everbond Spray Contact SP-230 evenly to both surfaces using a suitable spray gun, rollcoater, tooth-comb, or brush. For porous or open-weave materials, spray application is recommended to prevent the adhesive from bleeding through the face of the substrate.\u003c\/p\u003e\n  \u003cp\u003eWait 3 to 5 minutes until the adhesive is touch-dry before bringing the materials together with strong, even pressure. Once the container is opened, the material must be used within a short timeframe. Clean up wet adhesive tools and residue with acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Natural \/ 20L","offer_id":37551471722688,"sku":"CONTSP230N\/20","price":196.61,"currency_code":"AUD","in_stock":true},{"title":"Natural \/ 200L","offer_id":47039413387456,"sku":"CONTSP230N\/200","price":1761.05,"currency_code":"AUD","in_stock":true},{"title":"Red \/ 20L","offer_id":46349645971648,"sku":"CONTSP230R\/20","price":183.65,"currency_code":"AUD","in_stock":true},{"title":"Red \/ 200L","offer_id":47039413420224,"sku":"CONTSP230R\/200","price":1789.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-sp-230-spray-adhesive-foam-laminate-adheseal.jpg?v=1763706563"},{"product_id":"brush-contact-adhesive-everbond","title":"Everbond Brush Contact Adhesive","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims and edging profiles, without slipping.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond Brush Contact Adhesive is a one-component, yellow liquid that is applied to both mating surfaces. It features a very short flash-off time, drying in approximately 3 to 5 minutes under normal conditions. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, aging-resistant bond. When used with the 2P additive, this adhesive system is capable of withstanding temperatures exceeding 120°C without bond failure, making it highly stable for automotive upholstery, transport vehicle production, and furniture upholstery applications.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6 to 8 m² per Litre coverage:\u003c\/strong\u003e Provides clear material planning and consumption tracking for fabrication runs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e Extremely fast flash-off window speeds up assembly line pacing and manual fabrication.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application temperature:\u003c\/strong\u003e Safe operational range, with optimal bonding performance achieved when the atmosphere, substrate, and adhesive are all at +20°C.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive bonds a broad range of materials and is suitable for:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Timber, MDF, particleboard, plastic laminates, rubber sheets, leather, fabric, cloth-backed vinyl, polyester-backed vinyl, concrete, glass, and metal sheets.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransport vehicles:\u003c\/strong\u003e Room-temperature contact bonding of interior coverings (such as PUR foams and textiles) to adjoining steps, wheel arches, seat brackets, and side walls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpholstery:\u003c\/strong\u003e Automotive trim installations, furniture upholstery, and edge profile bonding where high spring-back forces occur.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature floor:\u003c\/strong\u003e Do not apply in temperatures below +10°C. Temperatures below this threshold can cause condensed water to form on the wet adhesive, preventing a successful bond.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSolvent entrapment:\u003c\/strong\u003e Do not apply excessive adhesive, allow it to pool, or join the substrates too early. Entrapped solvents will weaken the bond and cause surface blistering.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOpen weave or porous materials:\u003c\/strong\u003e Everbond Brush Contact Adhesive may bleed through open-weave or porous substrates; Adheseal spray contact adhesive is recommended for these materials instead.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eContainer management:\u003c\/strong\u003e Once the container is opened, the material must be used up in a short time.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003cp\u003eEnsure all adhesion surfaces are clean, dry, and free of oils, fats, and loose or friable materials. Apply the adhesive evenly to both surfaces using a suitable rollcoater, tooth-comb, brush, or notched trowel. Avoid any pooling. Allow the adhesive to dry until it is touch dry (typically 3 to 5 minutes depending on local humidity and temperature), then join the components together using strong, even pressure. Clean up wet or excess adhesive using Acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"20L","offer_id":37551471853760,"sku":"CONTBRUSH\/20","price":266.18,"currency_code":"AUD","in_stock":true},{"title":"4L","offer_id":46349645906112,"sku":"CONTBRUSH\/4","price":81.85,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-brush-contact-adhesive-foams-adheseal.jpg?v=1763706563"},{"product_id":"ultra-clear-brush-contact-adhesive-everbond","title":"Everbond Ultra Clear Brush Contact","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for secure assembly even when working with trim materials with high spring-back forces.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond Ultra Clear Brush Contact functions via rapid solvent evaporation. Applied evenly to both mating surfaces, the thixotropic liquid flashes off in approximately 3 to 5 minutes to form a tacky film. When the two surfaces are pressed together under strong pressure, they form an instant, high-strength bond. Because it dries clear, it prevents unsightly joint lines on exposed seams, such as those on neoprene drink coolers, PUR foams, and fine upholstery fabrics.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 to 8 m² per litre consumption:\u003c\/strong\u003e Provides a predictable coverage floor for estimating material requirements across flat substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e Extremely fast open-time window before bonding, keeping assembly lines and upholstery workshops moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application range:\u003c\/strong\u003e The safe temperature envelope for applying the adhesive to prevent pre-cure or condensation-related failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120°C heat resistance:\u003c\/strong\u003e Tested to withstand temperatures in excess of 120°C when used with the 2P additive, protecting the bond against high-heat cabin environments in transport vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eThis adhesive bonds a broad range of materials, particularly in the manufacturing of transport vehicles and commercial upholstery. Suitable substrates and applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Timber, MDF, particleboard, rubber sheets, plastic laminates, leather, glass, metal sheets, fabric, and both cloth-backed and polyester-backed vinyl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Assembly:\u003c\/strong\u003e Adjoining steps, wheel arches, seat brackets, side walls, cover trims, and edging profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstery \u0026amp; Manufacturing:\u003c\/strong\u003e Auto upholstery, furniture upholstery, PUR foams, textiles, and neoprene drink coolers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature floor:\u003c\/strong\u003e Do not apply in temperatures below +10°C. Cold temperatures can cause condensed water to form on the wet adhesive layer, preventing a proper bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication risks:\u003c\/strong\u003e Do not apply excessive adhesive, allow the product to pool, or join the substrates too early. Entrapped solvents from wet adhesive pools will result in blistering, a weak bond, or complete joint failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorous materials:\u003c\/strong\u003e For highly open-weave or porous substrates, Adheseal spray contact is recommended instead of brush application to prevent the adhesive from bleeding through to the face of the material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer life:\u003c\/strong\u003e Once the container is opened, the material must be used up in a short time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eAll adhesion surfaces must be clean, dry, and free of oils, grease, dust, and friable material.\u003c\/p\u003e\n\u003cp\u003eApply the adhesive evenly to both surfaces using a suitable roll-coater, tooth-comb, brush, or notched trowel. Avoid forming pools of adhesive in corners or depressions. Wait 3 to 5 minutes until the adhesive is touch-dry, then bring the two materials together with strong, even pressure. Clean up wet or excess adhesive with acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":43822342504640,"sku":"CONTBRUSHCL\/20","price":298.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-ultraclear-contact-adhesive-upholstery-adheseal.jpg?v=1763706687"},{"product_id":"megapoxy-84","title":"Megapoxy 84","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor high-wear industrial environments where high alumina ceramic tile linings must be fixed to steel or concrete under elevated temperatures, Megapoxy 84 provides the high-strength, heat-tolerant bond required to prevent lining failure. It is also formulated for the extreme mechanical demands of locking the inner and outer eccentric bushings in Symons Cone Crushers and other heavy crushing machinery.\u003c\/p\u003e\n\n \u003ch3\u003eHigh-temperature thermal and mechanical performance\u003c\/h3\u003e\n \u003cp\u003eMegapoxy 84 is a two-component epoxy paste adhesive that cures to a pale blue finish. It maintains its structural bond up to a maximum continuous operating temperature of 120°C. With a compressive strength of 120 MPa, it withstands the constant heavy impact and high load paths found in industrial crushing machinery and bulk material handling chutes. The thixotropic gel consistency of Part A prevents slumping during application, ensuring a full, even bed thickness when spreading over vertical or overhead surfaces before tiles are pressed into place.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e120 MPa compressive strength:\u003c\/strong\u003e High compressive capacity to withstand heavy crushing loads and continuous impact.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e120°C maximum operating temperature:\u003c\/strong\u003e Retains structural adhesion under high-heat service conditions.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.25 litres per m² coverage rate:\u003c\/strong\u003e Standard application rate for spreading on steel or concrete substrates with a notched trowel.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e30-minute work time (at 25°C):\u003c\/strong\u003e Practical open window to mix, apply, and align heavy ceramic tiles before the paste begins to set.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e72-hour full service cure:\u003c\/strong\u003e The required curing period before the tiled installation can be exposed to full mechanical loads and continuous temperatures up to 120°C.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDo not expose the application to elevated temperatures during the initial 48-hour cure period. The product is slightly brittle in the first 48 hours and requires this window to develop its full toughness.\u003c\/li\u003e\n \u003cli\u003eDo not apply Megapoxy 84 if the substrate or ambient temperature is below the 10°C minimum application limit.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSurface preparation\u003c\/h3\u003e\n \u003cp\u003eTo ensure a permanent, high-strength bond, substrates must be prepared to the following standards before mixing:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSteel:\u003c\/strong\u003e Must be cleaned to a \"white metal\" finish by grinding or grit blasting.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eConcrete:\u003c\/strong\u003e Must be scabbled back or grit blasted to expose firmly held aggregate.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiles:\u003c\/strong\u003e High alumina ceramic tile surfaces must be clean and free of grease and contaminants.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eMixing and application\u003c\/h3\u003e\n \u003cp\u003eMegapoxy 84 is supplied in pre-measured 2.5-litre kits (4 parts Part A to 1 part Part B). To prevent measuring errors, the entire kit should be mixed at one time. Slowly pour the liquid Part B into the thixotropic Part A container to prevent splashing. Mix thoroughly for a minimum of 3 minutes using a putty knife or spatula, scraping both the sides and the bottom of the container to ensure a uniform pale blue appearance.\u003c\/p\u003e\n \u003cp\u003eApply the mixed adhesive to the prepared steel or concrete at approximately 1.25 litres per m² using a notched trowel. Press the high alumina ceramic tiles firmly into the wet adhesive bed to achieve complete, even contact across the tile surface. Uncured adhesive can be cleaned from tools and surfaces using \u003ca href=\"\/products\/megapoxy-thinners\"\u003eMegapoxy Thinners\u003c\/a\u003e and warm soapy water.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Megapoxy","offers":[{"title":"Default Title","offer_id":43822340735168,"sku":"MP84\/2.5","price":177.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/products\/megapoxy-84-epoxy-adhesive-ceramic-tile-steel-adheseal.png?v=1763706687"},{"product_id":"megapoxy-132","title":"Megapoxy 132","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor floor protection in food and beverage production facilities, pharmaceutical industries, hospital kitchens, and high-traffic forklift ramps, Megapoxy 132 provides a high-strength, solvent-free epoxy barrier. This low-viscosity system is formulated to resist regular industrial cleaning and abrasion, and it carries AS 4020:2018 approval for contact with potable water.\u003c\/p\u003e\n\n \u003ch3\u003eClean environment compliance\u003c\/h3\u003e\n \u003cp\u003eMegapoxy 132 is free from any suspected or potential carcinogens or mutagens, ensuring it will not taint foodstuffs. It conforms to the Department of Primary Industries requirements for coatings and floorings used in export-registered food processing establishments, such as abattoirs. With a low volatile organic compound content of 7 g\/l, it is suitable for application in enclosed commercial spaces including bakeries, cafes, and bathrooms.\u003c\/p\u003e\n\n \u003ch3\u003eApplication and modification\u003c\/h3\u003e\n \u003cp\u003eThe low-viscosity liquid has a mixed viscosity of 620cps at 25°C, allowing application by brush, roller, squeegee, or airless spray. To meet specific slip-resistance and thickness requirements, the system can be modified on-site:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eIt accepts fine aggregates broadcast between coats to produce a non-slip surface for wet areas and vehicle driveways.\u003c\/li\u003e\n \u003cli\u003eIt can be mixed with fine aggregates to produce high-strength screed floors.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e120MPa ultimate compressive strength (ASTM C579):\u003c\/strong\u003e High load-bearing capacity to withstand heavy forklift traffic and machinery loads without crushing.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e\u0026gt;3MPa concrete bond strength (ASTM D4541):\u003c\/strong\u003e Strong adhesion to prepared concrete, ensuring the coating does not delaminate under shear forces.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e30-minute work time (at 25°C):\u003c\/strong\u003e The application window to spread, level, or broadcast aggregate before the mixed epoxy begins to set.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e24-hour minimum cure (at 25°C):\u003c\/strong\u003e The drying window before the floor can be put back into service, dropping to 12 hours at 35°C and extending to 48 hours at 15°C.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e0.000 gram\/hr m² water vapour transmission (ASTM E96\/E96M):\u003c\/strong\u003e Complete resistance to water vapour passage, protecting the underlying substrate.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMixing precision:\u003c\/strong\u003e Strict adherence to the 2:1 by volume mixing ratio is required. Inaccuracies or incomplete mixing will lower physical properties, prevent satisfactory curing, or cause discolouration with age.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMinimum application temperature:\u003c\/strong\u003e Do not apply when substrate or ambient temperatures are below 10°C.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCoated surfaces:\u003c\/strong\u003e All existing coatings must be removed prior to application. Bonding directly to existing paint or coatings reduces bond strength compared to a freshly prepared substrate.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMetal preparation limits:\u003c\/strong\u003e Wire brushing is not satisfactory for metal substrates and provides minimal adhesion. Metals must be grit blasted or mechanically abraded to bright metal.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSurface preparation\u003c\/h3\u003e\n \u003cp\u003eFor successful adhesion, substrates must be prepared according to their material class:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eConcrete:\u003c\/strong\u003e Must be free from grease and oil. Remove surface laitance by scabbling, grit blasting, or grinding. If mechanical prep is not possible, acid etch with a 1:1 hydrochloric acid and water mix at 0.5 litres per square metre, react for 10 minutes, scrub, rinse, and allow to dry for 24 hours until surface dry.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMetal surfaces:\u003c\/strong\u003e Grit blast to AS 1627.2.2002, or mechanically abrade to a clean, bright finish. Degrease immediately after abrasion by flooding with an industrial grade degreaser.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCoated concrete:\u003c\/strong\u003e Flame-clean or use a scutching tool to remove paint, then complete preparation with diamond grinding or scabbling.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCoated metals:\u003c\/strong\u003e Strip paint or galvanising using a high-quality paint stripper, followed by grit blasting or grinding to a bright metal finish.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eClean-up\u003c\/h3\u003e\n \u003cp\u003eTo keep mixing implements, squeegees, and application tools clean before the epoxy cures, use \u003ca href=\"\/products\/megapoxy-thinners\"\u003eMegapoxy Thinners\u003c\/a\u003e. Wear disposable rubber gloves during application and clean-up to maintain proper industrial hygiene.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Megapoxy","offers":[{"title":"Grey \/ 30L Kit","offer_id":37551473983680,"sku":"MP132GR\/30","price":909.36,"currency_code":"AUD","in_stock":true},{"title":"Clear \/ 30L Kit","offer_id":37551474049216,"sku":"MP132CL\/30","price":849.73,"currency_code":"AUD","in_stock":true},{"title":"Clear \/ 15L Kit","offer_id":37551474081984,"sku":"MP132CL\/15","price":506.86,"currency_code":"AUD","in_stock":true},{"title":"Clear \/ 4.5L Kit","offer_id":45248070156480,"sku":"MP132CL\/4.5","price":195.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/megapoxy-132-high-strength-epoxy-as4020-floors-adheseal.png?v=1763706786"},{"product_id":"megapoxy-mc","title":"Megapoxy MC","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor high-traffic food and beverage facilities, chemical bunds, and wastewater infrastructure, Megapoxy MC provides a 100% solids, VOC-free epoxy maintenance coating that resists heavy abrasion, chemical exposure, and hydrogen sulphide gas. It protects concrete and steel substrates, curing to a hygienic, dust-free gloss finish that is suitable for structures in contact with foodstuffs.\u003c\/p\u003e\n\u003ch3\u003eChemical and wear protection\u003c\/h3\u003e\n\u003cp\u003eMegapoxy MC is a high-build protective coating formulated to seal floors, walls, and structural steel against aggressive environmental hazards. For harsh or highly aggressive service conditions, a three-coat application is recommended to achieve a total cured dry film thickness of 0.4 mm to 0.5 mm. The cured coating resists chemical splash and immersion, protecting containment areas, plant rooms, and factory floors from chemical degradation. Where slip resistance is required for ramps, car parks, or forklift areas, the freshly applied first coat accepts a broadcast of epoxy-quality sand, glass beads, carborundum, or silicone oxide, or a fine aggregate can be mixed directly into the coating at a rate of 250 grams per 5 kg kit.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (ASTM D695):\u003c\/strong\u003e 70 MPa (MC2 Rapid version only), providing a high-strength surface that withstands forklift traffic and heavy mechanical loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond strength to concrete (ASTM D4541):\u003c\/strong\u003e \u0026gt;3 MPa, ensuring the coating adheres to prepared concrete substrates without delaminating under shear stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile bond strength to steel (ASTM D897):\u003c\/strong\u003e 13 MPa, providing high adhesion to properly prepared bright metal surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork time (at 25°C):\u003c\/strong\u003e 2 hours for the Standard version or 30 minutes for the MC2 Rapid version, defining the application window after mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRe-coat window (at 25°C):\u003c\/strong\u003e 8 hours for Standard or 4 hours for MC2 Rapid. If more than 24 hours elapses between coats, you must abrade the surface to a uniform dull finish using 60-grit paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 20 m² to 25 m² per 5 kg kit, or 80 m² to 100 m² per 20 kg kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cp\u003eDo not apply Megapoxy MC if the substrate temperature is below 10°C. Do not rely on wire brushing for metal preparation, as it is not entirely satisfactory and yields minimal adhesion only. Do not apply directly to existing coatings; bonding to coated surfaces will result in inferior bond strengths compared to bare, prepared substrates. Mixing ratios must be precise; inaccuracies or incomplete mixing will lower the physical properties of the cured system, and may prevent a complete cure or cause discolouration over time.\u003c\/p\u003e\n\u003ch3\u003eSubstrate preparation\u003c\/h3\u003e\n\u003cp\u003eTo ensure high adhesion, substrates must be prepared according to their material class:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete:\u003c\/strong\u003e Must be free from grease and oil. Remove surface laitance by mechanical abrasion (scabbling, grit blasting, or grinding). If mechanical preparation is not possible, acid etch using a 1:1 hydrochloric acid and water mix at 0.5 litres per square metre, allow to react for 10 minutes, scrub with a stiff broom, wash thoroughly, and allow to dry for 24 hours. Concrete must be surface dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal surfaces:\u003c\/strong\u003e Grit blast to AS CK 9.4 - 1964 Class 3 finish. If grit blasting is not possible, mechanically abrade to clean, bright metal, then degrease by flooding the surface with an industrial grade degreaser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoated concrete:\u003c\/strong\u003e Remove all traces of existing paint by flame-cleaning or using a scutching tool, followed by diamond grinding or scabbling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoated metals:\u003c\/strong\u003e Remove all paint, galvanising, or zinc coatings using a high-quality paint stripper, followed by grit blasting or grinding to a bright metal finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMixing and application\u003c\/h3\u003e\n\u003cp\u003eMegapoxy MC is supplied in pre-metered kits. Pour the entire contents of Part B into the Part A container. Mix the components thoroughly, scraping the base and corners of the tin, then scrape the sides and mix again. Use a timer and mix to the following durations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMegapoxy MC (Standard):\u003c\/strong\u003e Mix for a minimum of 3 minutes, scrape the sides, and mix for a further 2 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMegapoxy MC2 (Rapid):\u003c\/strong\u003e Mix for a minimum of 2 minutes, scrape the sides, and mix for a further 1 minute.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn highly porous concrete surfaces, prime first using \u003ca href=\"\/products\/megapoxy-lvs\"\u003eMegapoxy LVS\u003c\/a\u003e (Low Viscosity Sealer) applied at 8 m² to 10 m² per litre, and overcoat within 8 to 24 hours. Megapoxy MC can be thinned up to 10% with \u003ca href=\"\/products\/megapoxy-thinners\"\u003eMegapoxy Thinners\u003c\/a\u003e on the first coat, and 5% on the second coat, to improve workability. All thinners must evaporate before applying the next coat. Use Megapoxy Thinners to clean tools and mixing equipment immediately after use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Megapoxy","offers":[{"title":"Caribbean Blue \/ 5kg Kit","offer_id":45534512480448,"sku":"MPMCCAR\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Caribbean Blue \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534542954688,"sku":"MPMCCAR\/20","price":601.79,"currency_code":"AUD","in_stock":true},{"title":"Blue \/ 5kg Kit","offer_id":45534512513216,"sku":"MPMCBLU\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Blue \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534562025664,"sku":"MPMCBLU\/20","price":514.69,"currency_code":"AUD","in_stock":true},{"title":"Pacific Blue \/ 5kg Kit","offer_id":37551474344128,"sku":"MPMCPB\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Pacific Blue \/ 20kg Kit","offer_id":45534533157056,"sku":"MPMCPB\/20","price":601.79,"currency_code":"AUD","in_stock":true},{"title":"Charcoal \/ 5kg Kit","offer_id":38161263591616,"sku":"MPMCCHAR\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Charcoal \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":44064672940224,"sku":"MPMCCAR\/20","price":601.79,"currency_code":"AUD","in_stock":true},{"title":"Dark Grey \/ 5kg Kit","offer_id":37551474213056,"sku":"MPMCDKGR\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Dark Grey \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":44064672743616,"sku":"MPMCDKGR\/20","price":641.9,"currency_code":"AUD","in_stock":true},{"title":"Mid Grey \/ 5kg Kit","offer_id":45534512545984,"sku":"MPMCMIDGR\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Mid Grey \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534512578752,"sku":"MPMCMIDGR\/20","price":641.9,"currency_code":"AUD","in_stock":true},{"title":"Grey \/ 5kg Kit","offer_id":37551474245824,"sku":"MPMCGR\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Grey \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":44064672776384,"sku":"MPMCGR\/20","price":641.9,"currency_code":"AUD","in_stock":true},{"title":"Koala Grey \/ 5kg Kit","offer_id":37551474278592,"sku":"MPMCKOGR\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Koala Grey \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534562943168,"sku":"MPMCKGK\/20","price":601.79,"currency_code":"AUD","in_stock":true},{"title":"Safety Yellow \/ 5kg Kit","offer_id":37551474376896,"sku":"MPMCYEL\/5","price":206.86,"currency_code":"AUD","in_stock":true},{"title":"Safety Yellow \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534562975936,"sku":"MPMCYEL\/20","price":549.0,"currency_code":"AUD","in_stock":true},{"title":"White \/ 5kg Kit","offer_id":37551474311360,"sku":"MPMCWH\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"White \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534561894592,"sku":"MPMCWH\/20","price":601.79,"currency_code":"AUD","in_stock":true},{"title":"Black \/ 5kg Kit","offer_id":37551474180288,"sku":"MPMCBLK\/5","price":173.63,"currency_code":"AUD","in_stock":true},{"title":"Black \/ 20kg Kit (Made to Order: MOQ 16 Kits)","offer_id":45534545117376,"sku":"MPMCBLK\/20","price":601.79,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/megapoxy-mc-chemical-resistant-tank-linings-adheseal.png?v=1763706786"},{"product_id":"industrial-cleaning-rags-10kg","title":"Industrial Cleaning Rags 10kg","description":"\u003cp data-start=\"466\" data-end=\"837\"\u003e\u003cstrong data-start=\"466\" data-end=\"499\"\u003eIndustrial Cleaning Rags 10kg\u003c\/strong\u003e are supplied in convenient 10kg bags and provide a cost-effective wiping solution for workshops, manufacturing, printing, marine, automotive and general industrial applications. Choose from premium white cotton, coloured mixed t-shirt material, or premium white t-shirt rags to suit your cleaning, polishing and maintenance requirements.\u003c\/p\u003e\n\u003ch4 data-start=\"839\" data-end=\"865\"\u003eWhite Cotton Rag 10kg\u003c\/h4\u003e\n\u003cul data-start=\"866\" data-end=\"1098\"\u003e\n\u003cli data-section-id=\"orixuq\" data-start=\"866\" data-end=\"930\"\u003eGeneral-purpose cleaning rag where white material is preferred\u003c\/li\u003e\n\u003cli data-section-id=\"q72sxk\" data-start=\"931\" data-end=\"987\"\u003eHigh-grade recycled cotton with low linting properties\u003c\/li\u003e\n\u003cli data-section-id=\"6osfxn\" data-start=\"988\" data-end=\"1042\"\u003eIdeal for glass, coatings and finishing applications\u003c\/li\u003e\n\u003cli data-section-id=\"ys8v4y\" data-start=\"1043\" data-end=\"1098\"\u003eSuitable for cleaning, wiping and surface preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1100\" data-end=\"1228\"\u003e\u003cstrong data-start=\"1100\" data-end=\"1115\"\u003eDisclaimer:\u003c\/strong\u003e Our rags are manufactured from recycled materials. Size, colour and fabric composition may vary between batches.\u003c\/p\u003e\n\u003ch4 data-start=\"1230\" data-end=\"1270\"\u003eColoured T-Shirt \/ Singlet Rag 10kg\u003c\/h4\u003e\n\u003cul data-start=\"1271\" data-end=\"1476\"\u003e\n\u003cli data-section-id=\"gmmlhj\" data-start=\"1271\" data-end=\"1340\"\u003eGreat for mechanical, engineering, cleaning and printing industries\u003c\/li\u003e\n\u003cli data-section-id=\"135h9yt\" data-start=\"1341\" data-end=\"1380\"\u003eSoft, absorbent recycled cotton blend\u003c\/li\u003e\n\u003cli data-section-id=\"1nsm7r3\" data-start=\"1381\" data-end=\"1420\"\u003eLow linting for everyday workshop use\u003c\/li\u003e\n\u003cli data-section-id=\"1x5zuo3\" data-start=\"1421\" data-end=\"1476\"\u003eVersatile wiping rag supplied in convenient 10kg bags\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"1478\" data-end=\"1515\"\u003eWhite T-Shirt \/ Singlet Rag 10kg\u003c\/h4\u003e\n\u003cul data-start=\"1516\" data-end=\"1744\"\u003e\n\u003cli data-section-id=\"dwlshj\" data-start=\"1516\" data-end=\"1572\"\u003ePremium white wiping rag for professional applications\u003c\/li\u003e\n\u003cli data-section-id=\"1f9s4m\" data-start=\"1573\" data-end=\"1638\"\u003eIdeal for printing, marine, furniture, glass and polishing work\u003c\/li\u003e\n\u003cli data-section-id=\"16b300m\" data-start=\"1639\" data-end=\"1696\"\u003eWhite material helps reduce the risk of colour transfer\u003c\/li\u003e\n\u003cli data-section-id=\"z6gb0d\" data-start=\"1697\" data-end=\"1744\"\u003eHigh-grade material with virtually no linting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"1746\" data-end=\"1770\"\u003eCommon Applications\u003c\/h4\u003e\n\u003cul data-start=\"1771\" data-end=\"1956\"\u003e\n\u003cli data-section-id=\"1kpine0\" data-start=\"1771\" data-end=\"1790\"\u003eWorkshop cleaning\u003c\/li\u003e\n\u003cli data-section-id=\"9o3vf\" data-start=\"1791\" data-end=\"1814\"\u003eMachinery maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"9goouc\" data-start=\"1815\" data-end=\"1836\"\u003eSurface preparation\u003c\/li\u003e\n\u003cli data-section-id=\"1i8atm9\" data-start=\"1837\" data-end=\"1862\"\u003ePolishing and finishing\u003c\/li\u003e\n\u003cli data-section-id=\"14hxb3a\" data-start=\"1863\" data-end=\"1891\"\u003ePrinting industry cleaning\u003c\/li\u003e\n\u003cli data-section-id=\"rvvazt\" data-start=\"1892\" data-end=\"1912\"\u003eMarine maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"170z8vb\" data-start=\"1913\" data-end=\"1929\"\u003eGlass cleaning\u003c\/li\u003e\n\u003cli data-section-id=\"13ovd0l\" data-start=\"1930\" data-end=\"1956\"\u003eIndustrial spill cleanup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adheseal Tools","offers":[{"title":"White T-Shirt","offer_id":45170549719232,"sku":"RAGSWH\/10","price":51.82,"currency_code":"AUD","in_stock":true},{"title":"Coloured Mixed T-Shirt","offer_id":46791479722176,"sku":"RAGSMIX\/10","price":36.8,"currency_code":"AUD","in_stock":true},{"title":"White Cotton Shirt","offer_id":46935568908480,"sku":"RAGSCOTWH\/10","price":45.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/rags-low-lint-tshirt-glass-adheseal.png?v=1763707588"},{"product_id":"industrial-brush","title":"Industrial Brush","description":"\u003cp\u003eIndustrial Brush is a professional-grade application tool designed for marine maintenance and industrial manufacturing where high-viscosity coatings are required. The natural hog bristle construction provides the necessary stiffness and superior capillary action for even distribution of oil-based paints, varnishes, and anti-fouling coatings.\u003c\/p\u003e\n\u003cp\u003eTo ensure optimal results and prevent bristle shedding in heavy resins, flick the bristles before use; note that these natural filaments are not compatible with water-borne acrylics which may cause bristle swelling and project delays. Available in widths from 12mm to 100mm, these brushes feature a sturdy wooden handle for controlled application of resins and sealants in high-volume production environments.\u003c\/p\u003e","brand":"Adheseal","offers":[{"title":"12mm \/ Single Buy","offer_id":39319280550080,"sku":"BRUSHIND\/12","price":1.0,"currency_code":"AUD","in_stock":true},{"title":"12mm \/ Box Buy (12)","offer_id":37551492137152,"sku":"BRUSHIND\/12\/BOX","price":10.8,"currency_code":"AUD","in_stock":true},{"title":"38mm \/ Single Buy","offer_id":37551492169920,"sku":"BRUSHIND\/38","price":1.94,"currency_code":"AUD","in_stock":true},{"title":"38mm \/ Box Buy (12)","offer_id":39319270490304,"sku":"BRUSHIND\/38\/BOX","price":21.0,"currency_code":"AUD","in_stock":true},{"title":"50mm \/ Single Buy","offer_id":37551492202688,"sku":"BRUSHIND\/50","price":2.12,"currency_code":"AUD","in_stock":true},{"title":"50mm \/ Box Buy (12)","offer_id":39319274356928,"sku":"BRUSHIND\/50\/BOX","price":22.92,"currency_code":"AUD","in_stock":true},{"title":"75mm \/ Single Buy","offer_id":37551492235456,"sku":"BRUSHINDA\/75","price":3.1,"currency_code":"AUD","in_stock":true},{"title":"75mm \/ Box Buy (12)","offer_id":39319275307200,"sku":"BRUSHINDA\/75\/BOX","price":33.48,"currency_code":"AUD","in_stock":true},{"title":"100mm \/ Single Buy","offer_id":37551492268224,"sku":"BRUSHINDA\/100","price":3.7,"currency_code":"AUD","in_stock":true},{"title":"100mm \/ Box Buy (12)","offer_id":39319276257472,"sku":"BRUSHINDA\/100\/BOX","price":39.96,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/industrial-brush-hog-bristle-sealant-waterproofing-adheseal.jpg?v=1763707588"},{"product_id":"polyester-brush","title":"General Purpose Polyester Paint Brush","description":"\u003cp\u003eGeneral Purpose Polyester Paint Brush is a versatile applicator for residential and commercial interior painting on walls, ceilings, and trim. The synthetic polyester bristles maintain structural stiffness while providing high paint pickup and release for a smooth finish without visible streaking.\u003c\/p\u003e\n\u003cp\u003eThese hydrophobic filaments prevent the brush from becoming limp when used with water-based latex or acrylics, ensuring precise cut-in control and sharp edge definition on high-visibility surfaces.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"50mm \/ Single Buy","offer_id":39319885512896,"sku":"BRUSHPOLY\/50","price":6.26,"currency_code":"AUD","in_stock":true},{"title":"50mm \/ Box Buy (12)","offer_id":46791479558336,"sku":"BRUSHPOLY\/50\/BOX","price":67.56,"currency_code":"AUD","in_stock":true},{"title":"75mm \/ Single Buy","offer_id":46791479591104,"sku":"BRUSHPOLY\/75","price":8.74,"currency_code":"AUD","in_stock":true},{"title":"75mm \/ Box Buy (12)","offer_id":46791479623872,"sku":"BRUSHPOLY\/75\/BOX","price":94.44,"currency_code":"AUD","in_stock":true},{"title":"100mm \/ Single Buy","offer_id":46791479656640,"sku":"BRUSHPOLY\/100","price":10.77,"currency_code":"AUD","in_stock":true},{"title":"100mm \/ Box Buy (12)","offer_id":46791479689408,"sku":"BRUSHPOLY\/100\/BOX","price":116.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/polyester-paint-brush-synthetic-bristles-paint-adheseal.jpg?v=1763707589"},{"product_id":"megapoxy-thinners","title":"Megapoxy Thinners","description":"\u003cdiv class=\"quick-specs\"\u003e\u003cspan class=\"spec\"\u003e\u003cstrong\u003eUse Megapoxy Thinners for:\u003c\/strong\u003e Thinning Megapoxy epoxy products to achieve desired viscosity for application.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003eMegapoxy Thinners is a specially formulated solvent blend designed to reduce the viscosity of Megapoxy epoxy products. This ensures optimal application and curing, improving the overall performance of the epoxy. However, due to its highly flammable nature and hazardous components, strict safety precautions must be followed during handling and storage.\u003c\/p\u003e\n\u003ch3\u003eKey Features of Megapoxy Thinners:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialized Formulation:\u003c\/strong\u003e Tailored for Megapoxy epoxy products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective Thinning:\u003c\/strong\u003e Reduces viscosity for easier application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flammability:\u003c\/strong\u003e Requires careful handling and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Components:\u003c\/strong\u003e Contains Ethanol and Xylene, necessitating safety measures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Megapoxy Thinners:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Application:\u003c\/strong\u003e Ensures proper viscosity for Megapoxy epoxies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Curing:\u003c\/strong\u003e Facilitates even and effective curing of epoxy products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for use with Megapoxy products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Choose Megapoxy Thinners versus Alternatives:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose Megapoxy Thinners when:\u003c\/strong\u003e Thinning Megapoxy epoxy products is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider other options when:\u003c\/strong\u003e Alternative thinners may be used, but compatibility should be tested.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost-benefit comparison:\u003c\/strong\u003e Megapoxy Thinners is formulated for specific product compatibility, ensuring optimal results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTrade-Specific Applications for Megapoxy Thinners:\u003c\/h3\u003e\n\u003cdiv class=\"trade-section\"\u003e\n\u003ch3\u003eFor Construction and Engineering:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThinning epoxy coatings for structural applications.\u003c\/li\u003e\n\u003cli\u003eAdjusting viscosity for specific application methods (spraying, brushing).\u003c\/li\u003e\n\u003cli\u003eEnsuring proper curing of epoxy repairs and coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"trade-section\"\u003e\n\u003ch3\u003eFor Manufacturing and Fabrication:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThinning epoxy adhesives for bonding applications.\u003c\/li\u003e\n\u003cli\u003ePreparing epoxy coatings for industrial equipment.\u003c\/li\u003e\n\u003cli\u003eAdjusting epoxy viscosity for specific manufacturing processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"trade-section\"\u003e\n\u003ch3\u003eFor Marine Applications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThinning epoxy coatings for boat repairs and maintenance.\u003c\/li\u003e\n\u003cli\u003eAdjusting viscosity for optimal application in marine environments.\u003c\/li\u003e\n\u003cli\u003eEnsuring proper curing of epoxy coatings in saltwater conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eTechnical Overview\u003c\/h3\u003e\n\u003cp\u003eMegapoxy Thinners is a solvent blend primarily composed of Ethanol and Xylene, designed to reduce the viscosity of Megapoxy epoxy products. It is classified as a hazardous chemical and dangerous good due to its flammability and toxicity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical Properties:\u003c\/strong\u003e Highly flammable liquid, slightly soluble in water, completely soluble in most organic solvents. Contains Ethanol and Xylene.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Considerations:\u003c\/strong\u003e Requires proper ventilation and safety precautions due to its hazardous nature.\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Tools:\u003c\/strong\u003e Appropriate mixing containers, stirring equipment, and personal protective equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade-Specific Tips:\u003c\/strong\u003e Use in well-ventilated areas, avoid open flames, and wear appropriate PPE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Issues and Solutions:\u003c\/strong\u003e Ensure proper ventilation to avoid inhalation hazards, store in cool, dry places to prevent fire risks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage and Shelf Life\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Requirements:\u003c\/strong\u003e Store in a cool, dry, well-ventilated place, away from heat sources and ignition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life Information:\u003c\/strong\u003e No specific shelf life provided, but proper storage is crucial.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Considerations:\u003c\/strong\u003e Avoid high temperatures to prevent fire risks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCertifications and Compliance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClassified as Dangerous Goods by Australian and New Zealand transport regulations.\u003c\/li\u003e\n\u003cli\u003eScheduled Poison S6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Megapoxy","offers":[{"title":"Default Title","offer_id":37551514124480,"sku":"MPTHIN\/20","price":221.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/megapoxy-thinners-epoxy-waterproofing-adheseal.jpg?v=1763708719"},{"product_id":"handyman-cartridge-caulking-gun-type-20","title":"Handyman Cartridge Caulking Gun Type 20","description":"\u003cp\u003eHandyman Cartridge Caulking Gun Type 20 is a metal-framed manual applicator optimized for light-duty sealant and adhesive tasks in residential maintenance. The steel frame and handle provide a rigid cradle that prevents cartridge bypass under pressure, ensuring consistent bead delivery for interior trim and bathroom sealing.\u003c\/p\u003e\n\u003cp\u003eThis tool offers property managers and DIY users a durable, budget-friendly alternative to plastic applicators for high-turnover maintenance kits and occasional site use.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551514943680,"sku":"GUNCTG\/20","price":21.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/handyman-type-20-caulking-gun-steel-sealant-adheseal.jpg?v=1763708845"},{"product_id":"heavy-duty-cartridge-caulking-gun-type-35","title":"Heavy Duty Cartridge Caulking Gun Type 35","description":"\u003c!-- Quick Specs Section --\u003e\n\u003cdiv class=\"quick-specs\"\u003e\u003cspan class=\"spec\"\u003e\u003cstrong\u003e0Use Heavy Duty Cartridge Caulking Gun Type 35 for:\u003c\/strong\u003e Precision application of sealants and adhesives from 310ml cartridges in construction, plumbing, and automotive tasks.\u003c\/span\u003e\u003c\/div\u003e\n\u003c!-- Main Content --\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003c!-- Summary Paragraph --\u003e\n\u003cp\u003eThe Heavy Duty Cartridge Caulking Gun Type 35 is designed for trades who demand control, strength, and versatility on-site. Featuring a durable aluminium-alloy handle and a smooth 360-degree rotating frame, this gun offers ergonomic handling and seamless application from 310ml cartridges. Whether you're sealing bathrooms, bonding panels, or waterproofing joints, this gun gives professionals the leverage they need for consistent results. Built for everyday trade use in Australian conditions, it’s an essential in any tradie’s toolkit.\u003c\/p\u003e\n\u003c!-- Key Features --\u003e\n\u003ch3\u003eKey Features of Heavy Duty Cartridge Caulking Gun Type 35\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium-alloy handle for lightweight durability on the job\u003c\/li\u003e\n\u003cli\u003e360° rotating cradle for easy manoeuvring in tight spaces\u003c\/li\u003e\n\u003cli\u003eCompatible with standard 300ml cartridges used across trades\u003c\/li\u003e\n\u003cli\u003eHeavy duty construction ideal for high-viscosity sealants and adhesives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- Technical Overview --\u003e\n\u003ch3\u003eTechnical Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Properties:\u003c\/strong\u003e Non-reactive aluminium alloy body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range:\u003c\/strong\u003e 5°C to 40°C (41°F to 104°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Cartridge Size:\u003c\/strong\u003e 310ml standard cartridges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation Capability:\u003c\/strong\u003e 360-degree cradle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- Trade Information --\u003e\n\u003ch3\u003eTrade Professional Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Tools:\u003c\/strong\u003e Suits 300ml cartridges – pair with polyurethane or silicone sealants\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade-Specific Tips:\u003c\/strong\u003e Rotate cradle to maintain bead direction without hand strain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Issues and Solutions:\u003c\/strong\u003e For stiff flow, warm cartridge to ease extrusion in cold climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- Storage and Shelf Life --\u003e\n\u003ch3\u003eStorage and Shelf Life\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Requirements:\u003c\/strong\u003e Store in clean, dry area away from direct sunlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life Information:\u003c\/strong\u003e Unlimited if stored in non-corrosive conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Considerations:\u003c\/strong\u003e Safe between -10°C and 50°C (14°F to 122°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551514976448,"sku":"GUNCTG\/35","price":54.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/type-35-heavy-duty-caulking-gun-sealant-adheseal.png?v=1763708845"},{"product_id":"twin-component-cartridge-gun-2-x-300ml","title":"Twin Component Cartridge Gun 2 x 300ml","description":"\u003cp\u003eTwin Component Cartridge Gun 2 x 300ml is a professional-grade dual dispensing tool designed for high-stakes construction and industrial applications requiring precise chemical ratios. Built with a high-thrust steel frame and ergonomic grip, it consistently pushes medium to high-viscosity polyureas and epoxies through static mixers to eliminate soft spots and ensure structural integrity.\u003c\/p\u003e\n\u003cp\u003eThis heavy-duty system accommodates side-by-side 300ml configurations, providing a durable solution for vertical anchoring and rapid-set joint sealing where manual mixing is prone to error.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":46183852835008,"sku":"GUNTWIN\/300","price":98.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/twin-cartridge-gun-2x300ml-heavy-duty-sealant-adheseal.png?v=1763708845"},{"product_id":"handyman-sausage-caulking-gun-type-1","title":"Handyman Sausage Caulking Gun Type 1","description":"\u003cp\u003eHandyman Sausage Caulking Gun Type 1 is a manual applicator designed for sealing gaps and applying adhesives in residential fit-outs and general trade maintenance. Its 0.9kg heavy-duty plastic frame and ergonomic aluminium-alloy handle allow for precise bead control while reducing physical strain during extended overhead or vertical joint sealing.\u003c\/p\u003e\n\u003cp\u003eManufactured to ISO 9001 standards, this tool is optimized for 600ml sausage packs; however, users must maintain the 5°C to 40°C operating range and avoid corrosive cleaning agents to prevent mechanical failure or permanent tool damage.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551515074752,"sku":"GUNSSG\/1","price":49.49,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/handyman-sausage-caulking-gun-durable-sealant-adheseal.png?v=1763708847"},{"product_id":"trade-sausage-caulking-gun-type-3","title":"Trade Sausage Caulking Gun Type 3","description":"\u003cp\u003eTrade Sausage Caulking Gun Type 3 is a professional-grade sealant applicator designed for high-volume waterproofing, construction, and automotive glass projects. Constructed with a 1.2kg aluminium-alloy handle, it enables effortless extrusion of high-viscosity materials from 600ml sausages while allowing for rapid conversion to bulk loading systems.\u003c\/p\u003e\n\u003cp\u003eThis ISO 9001:2015 certified tool complies with Australian WHS ergonomic standards to ensure consistent performance and reduced injury risk during repetitive trade use.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551515107520,"sku":"GUNSSG\/3","price":76.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/sausage-caulking-gun-type3-600ml-waterproofing-adheseal.png?v=1763708957"},{"product_id":"professional-sausage-caulking-gun-type-5","title":"Professional Heavy Duty Sausage Caulking Gun Type 5","description":"\u003cp\u003eProfessional Heavy Duty Sausage Caulking Gun Type 5 is a high-pressure manual applicator designed for sealing expansion joints and high-volume construction gaps in demanding commercial environments. Built with an industrial-grade aluminium-alloy handle and ergonomic TPR grips, this 1.2kg tool provides the mechanical leverage required to bead high-viscosity sealants while reducing hand fatigue during extended shifts.\u003c\/p\u003e\n\u003cp\u003eThe modular design allows for rapid conversion from 600ml sausage packs to bulk loading via a specialized plunger kit, ensuring workflow efficiency and reduced material waste on large-scale waterproofing projects.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551515140288,"sku":"GUNSSG\/5","price":109.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/type5-sausage-caulking-gun-600ml-waterproofing-adheseal.png?v=1763708957"},{"product_id":"cordless-sausage-caulking-gun-m8504","title":"Cordless Sausage Caulking Gun M8504","description":"\u003cp\u003eCordless Sausage Caulking Gun M8504 is a professional-grade applicator specifically engineered for high-volume expansion joints and precast panel sealing. The high-thrust motor handles viscous polyurethane and hybrid sealants with a controlled thrust ratio, while the variable speed trigger ensures a consistent bead profile to maintain structural integrity across hundreds of meters.\u003c\/p\u003e\n\u003cp\u003eDual 20V lithium-ion batteries and an integrated LED work light allow for uninterrupted operation in visibility-challenged environments or large-scale commercial facades without the risk of cord-related safety hazards.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551515500736,"sku":"GUNSSG\/ELEC","price":343.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/m8504-cordless-sausage-caulking-gun-20v-sealant-adheseal.png?v=1763708957"},{"product_id":"large-disposable-caulking-sticks","title":"Large Disposable Caulking Sticks (50 Pack)","description":"\u003cp\u003eLarge Disposable Caulking Sticks (50 Pack) are professional-grade tooling accessories designed for precise sealant finishing in residential and commercial construction. These flexible yet durable sticks enable clean application in restricted-access gaps to ensure leak-proof seals on wood, metal, and concrete.\u003c\/p\u003e\n\u003cp\u003eThe bulk supply prevents project interruptions and mitigates the risk of cross-contaminating chemical bases while ensuring a consistent bead profile across high-volume sealing tasks.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551516811456,"sku":"CAULKST\/L","price":6.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/disposable-caulking-sticks-50-pack-tight-spaces-adheseal.jpg?v=1763709154"},{"product_id":"small-disposable-caulking-sticks","title":"Small Disposable Caulking Sticks (150 pack)","description":"\u003cp\u003eSmall Disposable Caulking Sticks (150 pack) are precision tooling accessories designed for finishing sealant joints in high-visibility architectural millwork and multi-unit construction environments. These flexible sticks enable the creation of consistent fillet profiles in tight 90-degree corners and ornate moldings where standard tools are too bulky to operate.\u003c\/p\u003e\n\u003cp\u003eThe single-use design mitigates the risk of substrate marring and prevents cross-contamination between different sealant types or colours, ensuring a professional finish without the downtime associated with tool maintenance or cleaning.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":37551516909760,"sku":"CAULKST\/150","price":3.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/150-disposable-caulking-sticks-tight-spaces-adheseal.jpg?v=1763709154"},{"product_id":"ms-609-fast-grab-adhesive","title":"Xtraseal MS-609 MS Polymer Adhesive","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably to dry and slightly damp substrates alike.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eXtraseal MS-609 functions as both a high-strength structural adhesive and an elastic sealant. Its hybrid MS polymer chemistry delivers high shear and tensile strength without the use of primers on most construction materials. Because it contains no isocyanates or silicones, it will not corrode galvanized or zinc-coated steel, nor will it degrade concrete. The formulation is low-odour, meets \"Green Star\" environmental criteria with a low VOC content of 38 grams per litre, and is compatible with water-based paint systems once cured.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-second immediate grab:\u003c\/strong\u003e Provides instant wet hold, minimising the need for mechanical bracing on vertical installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.1 MPa lap shear strength (ASTM C961):\u003c\/strong\u003e Resists high-stress forces on bonded structural elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200% elongation at break (ASTM D412):\u003c\/strong\u003e Accommodates thermal expansion and mechanical vibration without tearing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 400 kg\/m² wet strength:\u003c\/strong\u003e Sustains heavy initial loads immediately upon application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-40°C to +100°C temperature resistance:\u003c\/strong\u003e Maintains its physical bond and seal properties across extreme environmental service conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eXtraseal MS-609 is suitable for internal and external applications across construction, commercial sign installation, transport, and manufacturing industries. It bonds to the following substrates:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaminated kitchen benches, MDF, chipboard, and wood.\u003c\/li\u003e\n\u003cli\u003eAluminium, galvanized steel, powder-coated metals, and most other metals.\u003c\/li\u003e\n\u003cli\u003eEnamel, glass, porcelain, ceramic, and glazed tiles.\u003c\/li\u003e\n\u003cli\u003ePlaster, stone, and concrete.\u003c\/li\u003e\n\u003cli\u003ePolystyrene, PVC, fibreglass, polyester, and epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use in totally confined spaces:\u003c\/strong\u003e The adhesive requires atmospheric humidity to vulcanise; it will not cure in completely sealed or closed rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use in aquariums\u003c\/strong\u003e or for structural glazing applications where dedicated glazing silicones like N-80 or N-60 are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid contact with bitumen\u003c\/strong\u003e, tar, EPDM, neoprene, and butyl to prevent plasticiser migration, which causes discolouration and loss of adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid contact with uncured polyurethanes\u003c\/strong\u003e during the curing process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate limitations:\u003c\/strong\u003e May discolour copper and brass. Plastics such as polyacrylate and polycarbonate require a preliminary compatibility test before application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlkyd paints:\u003c\/strong\u003e Drying times of alkyd resin-based paints may increase when applied over this adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure restrictions:\u003c\/strong\u003e Do not expose the bond to thermal, mechanical, or chemical loads before complete vulcanisation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and usage\u003c\/h3\u003e\n\u003cp\u003eApply the adhesive at temperatures between 5°C and 40°C. For optimal performance, use a triangular nozzle to gun beads spaced 5 cm to 10 cm apart. Apply the adhesive with the caulking gun held at a 90-degree angle to stand a triangular bead twice as high as its width.\u003c\/p\u003e\n\u003cp\u003ePress the components together while the adhesive is wet, ensuring a minimum bond line thickness of 2 mm. This minimum thickness is critical to allow the elastic properties of the polymer to function. Although the adhesive provides an instant grab, heavy or highly stressed elements require mechanical support until the adhesive cures.\u003c\/p\u003e\n\u003cp\u003eFor critical high-performance applications, multi-storey facades, or extreme weather exposures, prepare non-porous substrates with Adheseal 50A surface prep (allowing 30 minutes to 2 hours drying time). Prime porous substrates such as concrete, renders, and brick with \u003ca href=\"\/products\/everflex-supaprime\"\u003eEverflex Supaprime\u003c\/a\u003e. Concrete must be cured for at least 28 days before application.\u003c\/p\u003e\n\u003ch3\u003eCure and clean up\u003c\/h3\u003e\n\u003cp\u003eThe adhesive has a skin time of 10 to 30 minutes and cures at a rate of 2 mm per 24 hours at 23°C and 50% relative humidity. Clean up wet spills and tools immediately using white spirits. Cured adhesive cannot be dissolved and must be removed by mechanical scraping or cutting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Single Buy","offer_id":40255200002240,"sku":"MS609\/CTG","price":11.03,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (12)","offer_id":40255200067776,"sku":"MS609\/CTG\/BOX","price":119.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/xtraseal-ms-609-high-grab-adhesive-mirrors-adheseal.png?v=1763709693"},{"product_id":"great-aussie-tradie-cleanup-wipes","title":"Great Aussie Tradie Cleanup Wipes","description":"\u003cp\u003eTradie Cleanup Wipes helping big filthy hands and surfaces with a safe clean and plastic free impact on the environment. Removes tough residues including adhesive, sealant, bitumen, grease, paint, oil and coatings without scratching surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e200 x 250mm\u003c\/li\u003e\n\u003cli\u003e100% plastic free, compostable, biodegradable wipes\u003c\/li\u003e\n\u003cli\u003eRemoves sealant and coating residue\u003c\/li\u003e\n\u003cli\u003eCleans tools and surfaces\u003c\/li\u003e\n\u003cli\u003eSafe on hands\u003c\/li\u003e\n\u003cli\u003eAustralian Made and Owned\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Great Aussie Wipes","offers":[{"title":"Single Buy","offer_id":43072960463040,"sku":"WIPESTRADIE","price":25.0,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (10)","offer_id":46791477297344,"sku":"WIPESTRADIE\/BOX","price":225.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/great-aussie-tradie-cleanup-wipes-waterproofing-adheseal.png?v=1780813153"},{"product_id":"permabond-102-50g","title":"Permabond 102","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor high-speed production lines and fast fixturing of close-fitting components, Permabond 102 provides rapid bonding of plastics, rubber, and metals. This low-viscosity ethyl cyanoacrylate polymerises quickly when pressed into a thin film between components, utilising surface moisture to initiate the cure without mixing or heat.\u003c\/p\u003e\n\n \u003ch3\u003eFast-setting surface contact\u003c\/h3\u003e\n \u003cp\u003ePermabond 102 operates as a single-component adhesive that must be applied sparingly to a single surface. Bringing the parts together under pressure spreads the liquid to its required thin film, developing handling strength on plastics like PVC and ABS in 7 to 10 seconds, and on Buna N Rubber in 5 to 10 seconds. On non-porous rigid substrates, the cured adhesive achieves high shear strength, causing substrate failure on ABS, PVC, and polycarbonate rather than bond failure.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e0.15 mm maximum gap fill:\u003c\/strong\u003e Formulated for tight-fitting parts where surfaces make direct contact.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5 to 15-second fixture time:\u003c\/strong\u003e Achieves initial handling strength (0.3 N\/mm² shear strength) in 5–10 seconds on Buna N Rubber, 7–10 seconds on PVC and ABS, and 10–15 seconds on steel and phenolic.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e19 to 23 N\/mm² shear strength (ISO4587):\u003c\/strong\u003e Delivers high-strength structural bonds on steel surfaces.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e24-hour full strength:\u003c\/strong\u003e Requires a full day to reach maximum cure before joint exposure to full operational loads.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e-55°C to 85°C temperature range:\u003c\/strong\u003e Withstands typical cold and warm service conditions, retaining approximately 40% strength at 100°C, and brief exposures to higher temperatures during paint baking or wave soldering.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cp\u003eSuitable for bonding close-fitting industrial plastics, rubbers, and metals. Specific compatible substrates include:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eMetals: Steel, aluminium, and zinc.\u003c\/li\u003e\n \u003cli\u003ePlastics: PVC, ABS, polycarbonate, and phenolic.\u003c\/li\u003e\n \u003cli\u003eRubbers: Buna N Rubber and other common elastomers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cp\u003eDo not use Permabond 102 in contact with strong oxidising materials or polar solvents, though the cured joint will withstand a brief solvent wash. Acidic surfaces or gaps larger than 0.15 mm will reduce the cure speed. Avoid bonding difficult plastics such as polypropylene, polyethylene, PTFE, or silicone without pre-treating the surfaces with Permabond Polyolefin Primer (POP).\u003c\/p\u003e\n\n \u003ch3\u003eHow to apply\u003c\/h3\u003e\n \u003cp\u003eSurfaces must be clean, dry, and free of grease before application. Clean and degrease surfaces using \u003ca href=\"\/products\/acetone\"\u003eacetone\u003c\/a\u003e or isopropanol. For aluminium, copper, and copper alloys, lightly abrade the surface with emery cloth to remove the oxide layer before bonding.\u003c\/p\u003e\n \u003cp\u003eApply the adhesive sparingly to one surface and assemble the parts quickly to ensure correct alignment. Apply sufficient pressure to spread the adhesive into a thin film. Do not disturb or re-align the joint during the first few seconds of assembly. Excess uncured adhesive can be cleaned using Permabond CA solvent, nitromethane, or acetone.\u003c\/p\u003e\n \u003cp\u003eStore the container between 2°C and 7°C. To prevent moisture condensation inside the bottle—which cures the adhesive and reduces shelf life—always allow the cold bottle to reach room temperature before opening.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Permabond","offers":[{"title":"Single Buy","offer_id":45489908842688,"sku":"CYNC2\/50","price":42.46,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (10)","offer_id":46747819475136,"sku":"CYNC2\/50\/BOX","price":382.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/permabond-102-cyanoacrylate-adhesive-tight-gaps-adheseal.jpg?v=1763710504"},{"product_id":"permabond-240-instant-adhesive","title":"Permabond 240","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor high-speed production lines assembling plastics, rubber, or metals, Permabond 240 is a high-viscosity cyanoacrylate that fills gaps up to 0.4 mm and prevents rapid absorption on porous substrates. It polymerises quickly when pressed into a thin film between parts, utilising surface moisture to develop handling strength in 15 to 20 seconds without mixing or heat curing.\u003c\/p\u003e\n\n \u003ch3\u003eWhat it does\u003c\/h3\u003e\n \u003cp\u003ePermabond 240 is a 100% reactive, solvent-free ethyl cyanoacrylate. Its high viscosity (1,200 to 2,500 mPa.s) prevents the adhesive from running off components or soaking immediately into porous materials, ensuring enough adhesive remains in the joint to bridge gaps. The single-part formula polymerises when compressed, achieving high shear strength on metals like steel, aluminium, and zinc, as well as plastics including ABS and PVC. For existing military designs, the formulation is approved to MIL-A-46050C Type II Class 3.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e0.4 mm maximum gap fill:\u003c\/strong\u003e High-viscosity formula allows reliable bonding across larger tolerances in metal and plastic assemblies.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e15 to 20 seconds fixture time:\u003c\/strong\u003e Rapid initial strength development on steel, Buna N rubber, and phenolic substrates to maintain high-speed production flow.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e21 to 25 N\/mm² shear strength (Steel):\u003c\/strong\u003e High ultimate joint strength on steel surfaces, with substrate failure occurring on ABS (\u0026gt;8 N\/mm²) and PVC (\u0026gt;11 N\/mm²).\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e-55°C to 85°C temperature limits:\u003c\/strong\u003e Maintains standard performance across this thermal range, and can withstand brief exposure to higher temperatures for paint baking and wave soldering if the joint is not under stress.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e24-hour full cure:\u003c\/strong\u003e Complete polymerisation time required to reach final physical properties and chemical resistance.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cp\u003eThis adhesive is formulated for bonding porous substrates, rubber, plastics, and metals. Compatible substrates include:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eMetals: Steel, Aluminium, and Zinc.\u003c\/li\u003e\n \u003cli\u003ePlastics and Synthetics: ABS, PVC, Polycarbonate (PC), Phenolic, and Buna N Rubber.\u003c\/li\u003e\n \u003cli\u003eWith primer: Polypropylene, polyethylene, PTFE, and silicone can be bonded if primed first with Permabond Polyolefin Primer (POP).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eInstallation\u003c\/h3\u003e\n \u003cp\u003eTo prevent premature failure and ensure rapid polymerisation, follow these application steps:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Surfaces must be clean, dry, and free of grease. Degrease surfaces using \u003ca href=\"\/products\/acetone\"\u003eacetone\u003c\/a\u003e or isopropanol. For aluminium, copper, and copper alloys, lightly abrade the surface with emery cloth to remove the oxide layer before bonding.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply the adhesive sparingly to one surface. Bring the components together quickly, ensuring correct alignment. Apply sufficient pressure to spread the adhesive into a thin film.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCure assistance:\u003c\/strong\u003e Larger gaps or acidic surfaces will reduce cure speed. This can be overcome by applying Permabond C Surface Activator (CSA) or Permabond QFS 16. For difficult or porous surfaces, using a Permabond activator is recommended.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eClean-up:\u003c\/strong\u003e Uncured surplus adhesive can be removed using Permabond CA solvent, nitromethane, or acetone.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eNot recommended for use in contact with strong oxidising materials or polar solvents, though it will withstand a brief solvent wash without bond degradation.\u003c\/li\u003e\n \u003cli\u003eCure speeds will slow down in larger gaps, at lower humidity, or on acidic surfaces unless an activator is used.\u003c\/li\u003e\n \u003cli\u003eMust be stored between 2°C and 7°C. Always allow the bottle to reach room temperature before opening to prevent condensation from forming inside the container, which reduces shelf life.\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Permabond","offers":[{"title":"Single Buy","offer_id":45489886200000,"sku":"CYNC4\/50","price":42.46,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (10)","offer_id":46747868397760,"sku":"CYNC4\/50\/BOX","price":382.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/permabond-240-high-viscosity-cyanoacrylate-adheseal.jpg?v=1763710504"},{"product_id":"twin-component-catridge-gun-400ml-10-1","title":"Twin Component Cartridge Gun 400ml 10:1","description":"\u003cp\u003eTwin Component Cartridge Gun 400ml 10:1 is a trade-grade applicator designed for the precision extrusion of two-part structural adhesives in construction and automotive glass environments. This tool features a high-thrust 10:1 ratio and an ergonomic aluminium-alloy trigger mechanism to deliver smooth flow even with high-viscosity epoxies, polyurethanes, and acrylics.\u003c\/p\u003e\n\u003cp\u003eEngineered specifically for 400ml coaxial cartridges, the reinforced steel frame prevents mechanical failure under high pressure, ensuring a reliable chemical bond across temperatures from 5°C to 35°C.\u003c\/p\u003e\n\u003cp\u003eThis applicator complies with Australian Construction Equipment Safety Standards and is manufactured in an ISO 9001 certified facility, providing the durability required for deep-hole structural anchoring and high-volume industrial assembly.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":44657952915648,"sku":"GUNTWIN\/KS10:1","price":32.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/twin-cartridge-caulking-gun-400ml-10-1-sealant-adheseal.png?v=1763710644"},{"product_id":"jumbo-catridge-gun-850ml","title":"Jumbo Cartridge Gun 850ml","description":"\u003cp\u003eJumbo Cartridge Gun 850ml is a professional-grade dispensing tool engineered for high-volume structural waterproofing and heavy infrastructure maintenance. This industrial steel frame tool utilizes a low gearing ratio to provide maximum mechanical advantage, ensuring consistent bead pressure and flow rates even when extruding high-viscosity structural sealants to prevent joint voids.\u003c\/p\u003e\n\u003cp\u003eThe 360-degree rotating frame allows specialists to maintain precise nozzle orientation in tight structural joints, while the anti-wear design and steel handle prevent frame flex and drive dog failure under maximum pressure.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":44657986863296,"sku":"GUN-CTGJUMBO\/KS","price":80.43,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/jumbo-850ml-caulking-gun-low-gear-360-joint-sealant-adheseal.png?v=1763710644"},{"product_id":"megapoxy-hicb","title":"Megapoxy HICB","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor backing metal liner plates and filling gaps between liners and support structures in cone crushers, gyratory crushers, and grinding mills, Megapoxy HICB is a two-component, 100% solids, pourable epoxy grout. It provides the high impact resistance and compressive strength needed to withstand heavy machinery loads on concrete and metal substrates without cracking or losing adhesion.\u003c\/p\u003e\n\n \u003ch3\u003eWhat it does\u003c\/h3\u003e\n \u003cp\u003eMegapoxy HICB cures to form a high-strength backing and reinforcement layer that absorbs extreme mechanical shock in mining and quarry machinery. This pourable, low-VOC epoxy flows into tight clearances between liner plates and support frames, securing locking bearings, chocking machinery, and grouting rail tracks. The formulation is available in both Standard and Accelerated versions, allowing installers to select the required cure speed and working window for the ambient temperature of the site.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e112 MPa compressive strength:\u003c\/strong\u003e Ultimate compressive strength (ASTM C579) ensures the cured grout carries heavy cyclic crushing forces without crushing or deforming.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e20 MPa tensile bond strength:\u003c\/strong\u003e High-strength adhesion (ASTM D897) secures metal-to-metal and metal-to-concrete contact points under severe vibration.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e50 mm maximum casting thickness:\u003c\/strong\u003e Defines the maximum depth allowed per single pour to control heat generation during cure and prevent thermal cracking.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e30-minute work time (Standard) \/ 10-minute (Accelerated):\u003c\/strong\u003e The application window at 25°C to pour and place the grout before the cure reaction begins.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e24-hour cure at 25°C (Standard) \/ 6-hour (Accelerated):\u003c\/strong\u003e Minimum curing periods required before returning crushers and heavy machinery to active service.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCone crushers and primary gyratory crushers\u003c\/li\u003e\n \u003cli\u003eGrinding mills, rotating mills, and pulverisers\u003c\/li\u003e\n \u003cli\u003eLocking bearings and machinery chocking\u003c\/li\u003e\n \u003cli\u003eSetting anchor bolts and rail track grouting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eInstallation and mixing\u003c\/h3\u003e\n \u003cp\u003eSuccessful application requires thorough preparation and strict mixing sequences to prevent curing failures:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Grit blast metal surfaces to AS 1627.2.2002. If grit blasting is not possible, mechanically abrade to clean, bright metal and degrease with an industrial-grade degreaser.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCrevice sealing:\u003c\/strong\u003e Seal all crevices with a rapid-setting putty, such as \u003ca href=\"\/products\/megapoxy-pf\"\u003eMegapoxy PF\u003c\/a\u003e, to prevent the liquid backing mixture from leaking out during the pour.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMixing process:\u003c\/strong\u003e Stir Part A to eliminate any settling. Add Part B slowly while mixing with a low-speed electric mixer for 2 minutes, scraping the base of the pail. Scrape the sides of the pail with a straight edge (do not use the mixer head) and mix for an additional minute until the blue-green colour is uniform.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Pour immediately after mixing. If ambient temperatures are high, store the kits in a cool place prior to mixing to prevent a severely shortened working life.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDo not exceed the maximum casting thickness of 50 mm per pour.\u003c\/li\u003e\n \u003cli\u003eDo not apply if ambient temperatures are below the minimum application temperature of 10°C.\u003c\/li\u003e\n \u003cli\u003eDo not rely on wire brushing for metal surface preparation, as it is not entirely satisfactory and yields minimal adhesion only.\u003c\/li\u003e\n \u003cli\u003eInaccuracies in the mix ratio or incomplete mixing of Part A and Part B will lower physical properties, prevent satisfactory curing, and cause discolouration on ageing.\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Megapoxy","offers":[{"title":"10kg","offer_id":45523863699648,"sku":"MPHICB\/10","price":148.06,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/megapoxy-hicb-high-impact-crusher-liner-backing-adheseal.png?v=1763711510"},{"product_id":"twin-component-cartridge-gun-2-x-200ml","title":"Twin Component Cartridge Gun – 2 x 200ml","description":"\u003cp\u003eTwin Component Cartridge Gun – 2 x 200ml is a professional manual applicator designed for the precise dispensing of high-viscosity two-part epoxies and structural sealants on industrial job sites. This tool incorporates an ergonomic aluminium-alloy handle and a patented catch plate system that eliminates material surging and backflow, ensuring consistent mix ratios and cleaner finishes.\u003c\/p\u003e\n\u003cp\u003eBy using a hardened steel push rod, it maintains structural bond integrity in high-stakes vertical facade joints without the risk of mechanical seizure or component bending common in lighter-duty equipment.\u003c\/p\u003e","brand":"Adheseal Tools","offers":[{"title":"Default Title","offer_id":46183847952576,"sku":"GUNTWIN\/200","price":98.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/twin-cartridge-caulking-gun-2x200ml-adhesives-adheseal.png?v=1763711642"},{"product_id":"megapoxy-megadure","title":"Megapoxy Megadure","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor equipment exposed to severe wear in mines, ball mills, coal-fired plants, dredging operations, and abrasive slurry pumps, Megadure Ceramic provides a high alumina bead epoxy lining to protect critical metal, steel, and concrete surfaces from extreme abrasion.\u003c\/p\u003e\n\n \u003ch3\u003eWhat it does\u003c\/h3\u003e\n \u003cp\u003eMegadure Ceramic is a two-component, gap-filling epoxy paste formulated with high alumina beads to resist intense abrasive wear. Applied by trowel or spatula, it fills gaps, builds a protective barrier on high-wear steel surfaces, and serves as a high-strength grout between wear-resistant high alumina ceramic tiles and pipe fittings. The system cures under ambient conditions to a distinct green colour, confirming a complete cure and indicating that the surface is ready for service.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e0.5 m² yield per kit:\u003c\/strong\u003e A single 2 kg kit covers half a square metre at a standard 2 mm application thickness.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e30-minute work time (Standard at 25°C):\u003c\/strong\u003e Gives installers a practical window to apply and dress the paste on larger steel or concrete surfaces.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10-minute work time (Quick Set at 25°C):\u003c\/strong\u003e Shorter working window for rapid repairs, achieving an initial cure in 2 hours to minimise equipment downtime.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10°C minimum limit:\u003c\/strong\u003e The lowest allowable application temperature to ensure the epoxy cures and develops its full physical properties.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cp\u003eThis lining system is formulated for protecting industrial bulk handling and processing equipment, including:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eLining steel surfaces, chutes, and pipe fittings\u003c\/li\u003e\n \u003cli\u003eGrouting joints between wear-resistant high alumina ceramic tiles\u003c\/li\u003e\n \u003cli\u003eProtecting slurry pumps, dredging equipment, and ball mills\u003c\/li\u003e\n \u003cli\u003eRebuilding worn concrete and metal components in high-abrasion environments\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSurface preparation\u003c\/h3\u003e\n \u003cp\u003eTo prevent adhesive failure and ensure the lining withstands mechanical stress, prepare substrates according to these minimum specifications:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMetals and steel:\u003c\/strong\u003e Grit blast to AS CK 9.4 Class 3 finish. If grit blasting is not possible, mechanically abrade to a clean, bright metal finish, then degrease by flooding the surface with a proprietary degreaser. Paint must be completely removed prior to grit blasting.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eConcrete:\u003c\/strong\u003e Must be completely dry, free of grease, oil, dust, and loose particles. Remove surface laitance using mechanical methods such as scabbling, grit blasting, or grinding. For painted concrete, remove all traces of paint by flame-cleaning or grinding before mechanical profiling.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDo not apply if the ambient or substrate temperature is below 10°C.\u003c\/li\u003e\n \u003cli\u003eWire brushing of metal surfaces is not recommended as it provides minimal adhesion and is not satisfactory for high-wear service.\u003c\/li\u003e\n \u003cli\u003eThorough mixing of Part A and Part B is essential; incomplete mixing will result in poor physical properties and premature failure of the lining.\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Megapoxy","offers":[{"title":"Standard","offer_id":46937959432384,"sku":"MPMEGACER\/2","price":128.51,"currency_code":"AUD","in_stock":true},{"title":"Quick Set","offer_id":46937959465152,"sku":"MPMEGACERQS\/2","price":128.51,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/megadure.png?v=1754479988"},{"product_id":"aluminium-angle-25x12","title":"Aluminium Angle Unequal 25x12","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 25x12\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 25 x 12 mm unequal legs, supplied in a 1.6 mm thickness and 2165 mm length.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides a wider and narrower leg for framing, edge protection, finishing trims and fabrication where a 25 x 12 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 25 x 12 mm unequal angle for offset edge and framing details.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1.6 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish, ready for preparation when a secondary finish is specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48431260205248,"sku":"ANGAL25X12X1.6\/2165","price":6.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-32x20","title":"Aluminium Angle Unequal 32x20","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 32x20\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 32 x 20 mm unequal legs, available in 1.6 mm and 3.0 mm thicknesses at 2165 mm long.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing, edge protection, finishing trims and fabrication where a 32 x 20 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 32 x 20 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness options:\u003c\/strong\u003e 1.6 mm or 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48431404581056,"sku":"ANGAL32X20X1.6\/2165","price":12.4,"currency_code":"AUD","in_stock":true},{"title":"3.0mm \/ 2165mm","offer_id":48431487811776,"sku":"ANGAL32X20X3\/2165","price":26.82,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-40x20","title":"Aluminium Angle Unequal 40x20","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 40x20\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 40 x 20 mm unequal legs, available in 1.6 mm and 3.0 mm thicknesses at 2165 mm long.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing, edge protection, finishing trims and fabrication where a 40 x 20 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 40 x 20 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness options:\u003c\/strong\u003e 1.6 mm or 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48431597486272,"sku":"ANGAL40X20X1.6\/2165","price":15.02,"currency_code":"AUD","in_stock":true},{"title":"3.0mm \/ 2165mm","offer_id":48431597519040,"sku":"ANGAL40X20X3\/2165","price":20.71,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-40x40","title":"Aluminium Angle Equal 40x40","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Equal 40x40\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 40 x 40 mm equal legs, supplied in a 1.6 mm thickness and 2165 mm length.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe equal profile provides matching leg widths for framing, edge protection, finishing trims and fabrication where a 40 x 40 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 40 x 40 mm equal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1.6 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48431797960896,"sku":"ANGAL40X40X1.6\/2165","price":18.44,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-50x25","title":"Aluminium Angle Unequal 50x25","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 50x25\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 50 x 25 mm unequal legs, available in 1.6 mm and 3.0 mm thicknesses at 2165 mm long.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing, edge protection, finishing trims and fabrication where a 50 x 25 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 50 x 25 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness options:\u003c\/strong\u003e 1.6 mm or 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48431868215488,"sku":"ANGAL50X25X1.6\/2165","price":15.66,"currency_code":"AUD","in_stock":true},{"title":"3.00mm \/ 2165mm","offer_id":48431915073728,"sku":"ANGAL50X25X3\/2165","price":33.49,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-50x40","title":"Aluminium Angle Unequal 50x40","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 50x40\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 50 x 40 mm unequal legs, available in 1.6 mm and 3.0 mm thicknesses at 3250 mm long.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing, edge protection, finishing trims and fabrication where a 50 x 40 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 50 x 40 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness options:\u003c\/strong\u003e 1.6 mm or 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3250 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 3250mm","offer_id":48431946334400,"sku":"ANGAL50X40X1.6\/3250","price":20.37,"currency_code":"AUD","in_stock":true},{"title":"3.00mm \/ 3250mm","offer_id":48431946367168,"sku":"ANGAL50X40X3\/3250","price":37.76,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-50x50","title":"Aluminium Angle Equal 50x50","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Equal 50x50\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 50 x 50 mm equal legs, available in 1.6 mm and 3.0 mm thicknesses at 2165 mm long.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe equal profile provides matching leg widths for framing, edge protection, finishing trims and fabrication where a 50 x 50 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 50 x 50 mm equal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness options:\u003c\/strong\u003e 1.6 mm or 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48432114532544,"sku":"ANGAL50X50X1.6\/2165","price":25.4,"currency_code":"AUD","in_stock":true},{"title":"3.00mm \/ 2165mm","offer_id":48432114565312,"sku":"ANGAL50X50X3\/2165","price":50.67,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-60x25","title":"Aluminium Angle Unequal 60x25","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 60x25\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 60 x 25 mm unequal legs, supplied in a 3.0 mm thickness and 3250 mm length.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing, edge protection, finishing trims and fabrication where a 60 x 25 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 60 x 25 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3250 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"3.00mm \/ 3250mm","offer_id":48432174989504,"sku":"ANGAL60X25X3\/3250","price":43.01,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-70x25","title":"Aluminium Angle Unequal 70x25","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 70x25\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 70 x 25 mm unequal legs, supplied in a 1.6 mm thickness and 2165 mm length.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing, edge protection, finishing trims and fabrication where a 70 x 25 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 70 x 25 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1.6 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2165 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"1.6mm \/ 2165mm","offer_id":48432267886784,"sku":"ANGAL70X25X1.6\/2165","price":15.73,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-76x76","title":"Aluminium Angle Equal 76x76","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Equal 76x76\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 76 x 76 mm equal legs, available as 3.0 mm x 3250 mm and 3.2 mm x 6500 mm sections.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe equal profile provides matching leg widths for framing and fabrication where a 76 x 76 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 76 x 76 mm equal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable sections:\u003c\/strong\u003e 3.0 mm thickness at 3250 mm long, or 3.2 mm thickness at 6500 mm long.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"3.0mm \/ 3250mm","offer_id":48432396566720,"sku":"ANGAL76X76X3\/3250","price":133.03,"currency_code":"AUD","in_stock":true},{"title":"3.2mm \/ 6500mm","offer_id":48432463872192,"sku":"ANGAL76X76X3.2\/6500","price":241.87,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"},{"product_id":"aluminium-angle-100x50","title":"Aluminium Angle Unequal 100x50","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium Angle Unequal 100x50\u003c\/strong\u003e is a 6060 T5 mill-finish aluminium L-profile with 100 x 50 mm unequal legs, supplied in a 3.0 mm thickness and available in 2165 mm and 6500 mm lengths.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eThe unequal profile provides two different leg widths for framing and fabrication where a 100 x 50 mm section is specified. The alloy is used where corrosion resistance, weldability and a high strength-to-weight ratio matter.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg dimensions:\u003c\/strong\u003e 100 x 50 mm unequal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength options:\u003c\/strong\u003e 2165 mm or 6500 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy and temper:\u003c\/strong\u003e 6060 T5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Mill finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eSuitable for general fabrication, vehicle and caravan body work, shopfitting and architectural framework applications where this section meets the project requirements.\u003c\/p\u003e\n\u003ch3\u003eBefore installation or coating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissimilar metals:\u003c\/strong\u003e Isolate the aluminium when fastening to dissimilar metals to reduce galvanic-corrosion risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated timber:\u003c\/strong\u003e Avoid direct contact with green or treated timber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary finishing:\u003c\/strong\u003e Degrease and prepare the mill-finish surface before anodising, powder coating or painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"3.0mm \/ 2165mm","offer_id":48432545267904,"sku":"ANGAL100X50X3\/2165","price":56.43,"currency_code":"AUD","in_stock":true},{"title":"3.0mm \/ 6500mm","offer_id":48432545300672,"sku":"ANGAL100X50X3\/6500","price":142.46,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/6060-t5-aluminium-l-angle-mill-finish-tiling-trims-adheseal.jpg?v=1763707282"}],"url":"https:\/\/adheseal.com.au\/collections\/manufacturing-range.oembed","provider":"Adheseal","version":"1.0","type":"link"}