{"title":"Panel \u0026 Laminate Adhesives","description":"\u003cp\u003eContact adhesives, PVA wood glues, and a fast-grab hybrid for bonding laminates, panels, timber, foam, and board. Pick by material, open time, and how the assembly is handled: spray, brush, or cartridge.\u003c\/p\u003e","products":[{"product_id":"general-purpose-pva-everbond","title":"Everbond General Purpose PVA","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor cabinetry, shopfitting, and joinery applications requiring a sandable, non-staining timber bond, Everbond General Purpose PVA provides a reliable joint that cures to a hard, translucent film. This synthetic resin adhesive is formulated for standard workshop assembly, laminating, and veneering where high moisture resistance is not a primary requirement.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond General Purpose PVA cures through water dissipation and crosslinking under ambient conditions. The adhesive resists normal humidity cycles and inhibits the growth of mould, bacteria, and fungi. Full cure is achieved when the adhesive interphase reaches moisture equilibrium, which typically takes approximately seven days depending on timber density, moisture content, adhesive mass, and ambient conditions.\u003c\/p\u003e\n\u003cp\u003eFor specialized lines, water resistance can be increased and the cure accelerated by thermo-curing. This requires mixing Catalyst Number 1 at a rate of 1% w\/w before hot pressing.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e48\/50% solids content:\u003c\/strong\u003e Provides a stable resin density to minimize excessive shrinkage during water dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 to 140 g\/m² spread rate:\u003c\/strong\u003e The required adhesive coverage for surface bonding applications to ensure complete wet-out without excessive squeeze-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 to 180 g\/m² spread rate:\u003c\/strong\u003e The required adhesive coverage for structural assembly bonding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8°C minimum application temperature:\u003c\/strong\u003e The lowest allowable substrate and workshop temperature to ensure proper film formation and bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly bonding:\u003c\/strong\u003e Standard dowel, carcass, and general timber joinery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard joints and block bonding:\u003c\/strong\u003e Solid timber laminating and edge gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaminating and veneering:\u003c\/strong\u003e Surface gluing of decorative papers, timber veneers, and high-pressure laminates (HPL) to particle board or solid timber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePressing times and thermo-curing\u003c\/h3\u003e\n\u003cp\u003eMinimum pressing times vary by application and heating method:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gluing of decorative papers:\u003c\/strong\u003e From 10 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh frequency gluing (longitudinal heating):\u003c\/strong\u003e From 20 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gluing of high-pressure laminates in short-cycle presses (+70°C):\u003c\/strong\u003e From 60 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly bonding:\u003c\/strong\u003e 30 minutes under clamp pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard joints and block bonding:\u003c\/strong\u003e 45 minutes under clamp pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor hot-press thermo-curing (applicable for 1-2mm timber veneer to solid timber or particle board with 8-12% timber moisture), apply an adhesive spread rate of 150 to 200 g\/m² and press at 4 to 5 kp\/cm² for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30 seconds at 80°C, or\u003c\/li\u003e\n\u003cli\u003e30 seconds at 130°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot waterproof:\u003c\/strong\u003e Do not use in external applications, wet areas, or areas subject to water immersion. It is suitable only for normal dry interior humidity cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e Use within 6 months of manufacture when stored in original packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e Store indoors between 10°C and 30°C. Do not apply if the temperature is below 8°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and clean-up\u003c\/h3\u003e\n\u003cp\u003eEnsure the adhesive is completely homogenous before use. Clean all brushes, rollers, and glue baths with water immediately after use, before the adhesive dries. Once cured, the film can only be removed mechanically by sanding.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"5L","offer_id":37551470706880,"sku":"PVAGP\/5","price":60.48,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":46349646102720,"sku":"PVAGP\/20","price":166.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-pva-adhesive-timber-bonding-adheseal.jpg?v=1763706563"},{"product_id":"melamine-pva-adhesive-everbond","title":"Everbond Melamine PVA Adhesive","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor bonding melamine faced board and laminates in cabinet making and furniture construction, Everbond Melamine PVA Adhesive provides the high-solids adhesion required to join non-porous melamine surfaces to timber substrates without failing.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond Melamine PVA Adhesive is a high-solids PVA\/EVA-based adhesive that applies white and dries clear. It is formulated to bond difficult, non-porous melamine faces and laminates to wood-based materials. The formulation requires an exact mechanical fit between the mating surfaces; gaps between substrates will extend drying times and significantly reduce the final strength of the bond.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 g\/m² coverage rate:\u003c\/strong\u003e Provides the baseline material estimation for application planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e~3 minute open time:\u003c\/strong\u003e The narrow window available to assemble and align joints before the adhesive skin forms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 to 4 hours clamp time:\u003c\/strong\u003e Required press duration under standard conditions (20°C and 65% Relative Humidity) to achieve initial handling strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 to 48 hours full cure:\u003c\/strong\u003e The time required under standard conditions to achieve maximum bond strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKitchen cabinets and drawer assembly\u003c\/li\u003e\n\u003cli\u003eFurniture construction\u003c\/li\u003e\n\u003cli\u003eBonding melamine faced board to timber\u003c\/li\u003e\n\u003cli\u003eLaminate bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation limits\u003c\/h3\u003e\n\u003cp\u003eSurfaces must be clean and free from oil, dust, and other contaminants. Apply the adhesive evenly to one surface using a squeeze bottle or brush. The parts must be joined within the 3-minute open time and clamped or pressed until sufficient initial bond strength is achieved. For optimal bonding, timber moisture content should be between 8% and 10%, with ambient relative humidity between 60% and 70%.\u003c\/p\u003e\n\u003cp\u003eClean up wet adhesive and tools immediately with warm soapy water. Once dried, the adhesive cannot be dissolved and must be removed mechanically.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-structural only:\u003c\/strong\u003e This is a non-structural adhesive and must not be used for structural load-bearing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature minimum:\u003c\/strong\u003e Do not apply when substrate or ambient temperatures are below 10°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage limits:\u003c\/strong\u003e Store between 5°C and 40°C out of direct sunlight. Do not allow the product to freeze.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"5L","offer_id":37551471427776,"sku":"PVAMEL\/5","price":105.18,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":46349646069952,"sku":"PVAMEL\/20","price":310.56,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-melamine-pva-fast-clear-cabinetry-adheseal.jpg?v=1763706563"},{"product_id":"everbond-pva-xlink-3","title":"Everbond PVA Xlink 3","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions without requiring mixing.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond PVA Xlink 3 is a synthetic resin adhesive that cures through water dissipation and crosslinking. Under ambient conditions, it cures to a firm, highly water-resistant bond. Full cure is optimised when the adhesive interphase reaches moisture equilibrium, which typically takes seven days depending on timber density, substrate and adhesive mass, moisture content, and ambient conditions.\u003c\/p\u003e\n  \u003cp\u003eFor high-volume production, curing can be accelerated by hot pressing. Water resistance can be further increased by thermocuring after mixing Catalyst Number 1 at a rate of 1% w\/w.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e8°C minimum application temperature:\u003c\/strong\u003e The lower thermal limit for the adhesive to form a proper bond during application.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e48% to 50% solids content:\u003c\/strong\u003e High polymer concentration ensuring high bond strength and controlled shrinkage during water dissipation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e9,300 to 13,500 cP viscosity:\u003c\/strong\u003e A stable, medium-viscosity white liquid suitable for dowelling, assembly, and laminating.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive is suitable for assembly bonding, dowelling, laminating, and board joint or block bonding. Compatible substrates and materials include:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eAll timber species and solid timber\u003c\/li\u003e\n    \u003cli\u003eParticle board\u003c\/li\u003e\n    \u003cli\u003eTimber veneer\u003c\/li\u003e\n    \u003cli\u003eHigh-pressure laminates\u003c\/li\u003e\n    \u003cli\u003eDecorative papers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003ePress times and thermocuring\u003c\/h3\u003e\n  \u003cp\u003eMinimum pressing times vary by application method and temperature:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSurface gluing of decorative papers:\u003c\/strong\u003e From 10 seconds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh frequency gluing (longitudinal heating):\u003c\/strong\u003e From 20 seconds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSurface gluing of high-pressure laminates (+70°C short-cycle presses):\u003c\/strong\u003e From 60 seconds\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAssembly bonding:\u003c\/strong\u003e 30 minutes\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBoard joint and block bonding:\u003c\/strong\u003e 45 minutes\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eFor veneering 1mm to 2mm timber veneer to solid timber or particle board (with timber moisture at 8% to 12%), the recommended thermocuring cycle is 30 seconds at 80°C followed by 30 seconds at 130°C. This requires an adhesive spread rate of 150 to 200 g\/m² and a pressure of 4 to 5 kp\/cm².\u003c\/p\u003e\n\n  \u003ch3\u003eApplication and limits\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAdhesive coverage rates:\u003c\/strong\u003e Apply at 80 to 140 g\/m² for surface bonding, and 160 to 180 g\/m² for assembly bonding.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Ensure the adhesive is completely homogenous before use.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClean-up:\u003c\/strong\u003e Wash out brushes, rollers, and glue baths with water before the adhesive dries.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStorage limits:\u003c\/strong\u003e Store indoors under ambient conditions between 10°C and 30°C. Keep containers closed when not in use. Shelf life is 6 months in original packaging.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"5L","offer_id":37551471526080,"sku":"PVAXL\/5","price":72.58,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":46349646004416,"sku":"PVAXL\/20","price":186.93,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-pva-xlink3-waterproof-wood-adhesive-adheseal.jpg?v=1763706563"},{"product_id":"sp-230-spray-contact-adhesive-everbond","title":"Everbond Spray Contact SP-230","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces, such as cover trims and edging profiles.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond Spray Contact SP-230 functions through contact bonding, requiring application to both mating surfaces. Once applied, the volatile solvents evaporate quickly during a short flash-off window. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, high-strength bond that resists both heat and water. The formulation is also resistant to ageing, preserving bond integrity over time in demanding environments like vehicle cabins and furniture upholstery.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e A short flash-off window that speeds up assembly and fabrication sequences.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6 to 8m² per litre consumption:\u003c\/strong\u003e Provides a predictable coverage rate for estimating material requirements across large surfaces.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application range:\u003c\/strong\u003e The allowable temperature window for applying the adhesive without compromising bond development.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive bonds a broad range of materials and is suitable for:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Timber, MDF, particleboard, rubber sheets, plastic laminates, leather, fabric, cloth-backed and polyester-backed vinyl, concrete, glass, and metal sheets.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransport vehicle assembly:\u003c\/strong\u003e Room temperature contact bonding of PUR foams and textiles to adjacent steps, wheel arches, seat brackets, and side walls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpholstery:\u003c\/strong\u003e Automotive and furniture upholstery applications, especially where high spring-back forces are present.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDo not apply in temperatures below +10°C; condensed water can form on the adhesive film and prevent a proper bond. For optimal performance, apply when the atmosphere, material, and adhesive are all at +20°C.\u003c\/li\u003e\n    \u003cli\u003eDo not apply excessive adhesive, allow it to pool, or join the substrates too early. Entrapped solvents will weaken the bond or cause blistering and complete bond failure.\u003c\/li\u003e\n    \u003cli\u003eAdhesion and compatibility must be verified by testing actual substrates and conditions prior to full-scale application.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003cp\u003eSurfaces must be clean, dry, and free of oils, grease, and loose or friable materials. Apply Everbond Spray Contact SP-230 evenly to both surfaces using a suitable spray gun, rollcoater, tooth-comb, or brush. For porous or open-weave materials, spray application is recommended to prevent the adhesive from bleeding through the face of the substrate.\u003c\/p\u003e\n  \u003cp\u003eWait 3 to 5 minutes until the adhesive is touch-dry before bringing the materials together with strong, even pressure. Once the container is opened, the material must be used within a short timeframe. Clean up wet adhesive tools and residue with acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Natural \/ 20L","offer_id":37551471722688,"sku":"CONTSP230N\/20","price":196.61,"currency_code":"AUD","in_stock":true},{"title":"Natural \/ 200L","offer_id":47039413387456,"sku":"CONTSP230N\/200","price":1761.05,"currency_code":"AUD","in_stock":true},{"title":"Red \/ 20L","offer_id":46349645971648,"sku":"CONTSP230R\/20","price":183.65,"currency_code":"AUD","in_stock":true},{"title":"Red \/ 200L","offer_id":47039413420224,"sku":"CONTSP230R\/200","price":1789.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-sp-230-spray-adhesive-foam-laminate-adheseal.jpg?v=1763706563"},{"product_id":"brush-contact-adhesive-everbond","title":"Everbond Brush Contact Adhesive","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims and edging profiles, without slipping.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond Brush Contact Adhesive is a one-component, yellow liquid that is applied to both mating surfaces. It features a very short flash-off time, drying in approximately 3 to 5 minutes under normal conditions. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, aging-resistant bond. When used with the 2P additive, this adhesive system is capable of withstanding temperatures exceeding 120°C without bond failure, making it highly stable for automotive upholstery, transport vehicle production, and furniture upholstery applications.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6 to 8 m² per Litre coverage:\u003c\/strong\u003e Provides clear material planning and consumption tracking for fabrication runs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e Extremely fast flash-off window speeds up assembly line pacing and manual fabrication.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application temperature:\u003c\/strong\u003e Safe operational range, with optimal bonding performance achieved when the atmosphere, substrate, and adhesive are all at +20°C.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive bonds a broad range of materials and is suitable for:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Timber, MDF, particleboard, plastic laminates, rubber sheets, leather, fabric, cloth-backed vinyl, polyester-backed vinyl, concrete, glass, and metal sheets.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransport vehicles:\u003c\/strong\u003e Room-temperature contact bonding of interior coverings (such as PUR foams and textiles) to adjoining steps, wheel arches, seat brackets, and side walls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpholstery:\u003c\/strong\u003e Automotive trim installations, furniture upholstery, and edge profile bonding where high spring-back forces occur.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature floor:\u003c\/strong\u003e Do not apply in temperatures below +10°C. Temperatures below this threshold can cause condensed water to form on the wet adhesive, preventing a successful bond.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSolvent entrapment:\u003c\/strong\u003e Do not apply excessive adhesive, allow it to pool, or join the substrates too early. Entrapped solvents will weaken the bond and cause surface blistering.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOpen weave or porous materials:\u003c\/strong\u003e Everbond Brush Contact Adhesive may bleed through open-weave or porous substrates; Adheseal spray contact adhesive is recommended for these materials instead.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eContainer management:\u003c\/strong\u003e Once the container is opened, the material must be used up in a short time.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003cp\u003eEnsure all adhesion surfaces are clean, dry, and free of oils, fats, and loose or friable materials. Apply the adhesive evenly to both surfaces using a suitable rollcoater, tooth-comb, brush, or notched trowel. Avoid any pooling. Allow the adhesive to dry until it is touch dry (typically 3 to 5 minutes depending on local humidity and temperature), then join the components together using strong, even pressure. Clean up wet or excess adhesive using Acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"20L","offer_id":37551471853760,"sku":"CONTBRUSH\/20","price":266.18,"currency_code":"AUD","in_stock":true},{"title":"4L","offer_id":46349645906112,"sku":"CONTBRUSH\/4","price":81.85,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-brush-contact-adhesive-foams-adheseal.jpg?v=1763706563"},{"product_id":"ultra-clear-brush-contact-adhesive-everbond","title":"Everbond Ultra Clear Brush Contact","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for secure assembly even when working with trim materials with high spring-back forces.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond Ultra Clear Brush Contact functions via rapid solvent evaporation. Applied evenly to both mating surfaces, the thixotropic liquid flashes off in approximately 3 to 5 minutes to form a tacky film. When the two surfaces are pressed together under strong pressure, they form an instant, high-strength bond. Because it dries clear, it prevents unsightly joint lines on exposed seams, such as those on neoprene drink coolers, PUR foams, and fine upholstery fabrics.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 to 8 m² per litre consumption:\u003c\/strong\u003e Provides a predictable coverage floor for estimating material requirements across flat substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e Extremely fast open-time window before bonding, keeping assembly lines and upholstery workshops moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application range:\u003c\/strong\u003e The safe temperature envelope for applying the adhesive to prevent pre-cure or condensation-related failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120°C heat resistance:\u003c\/strong\u003e Tested to withstand temperatures in excess of 120°C when used with the 2P additive, protecting the bond against high-heat cabin environments in transport vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eThis adhesive bonds a broad range of materials, particularly in the manufacturing of transport vehicles and commercial upholstery. Suitable substrates and applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Timber, MDF, particleboard, rubber sheets, plastic laminates, leather, glass, metal sheets, fabric, and both cloth-backed and polyester-backed vinyl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Assembly:\u003c\/strong\u003e Adjoining steps, wheel arches, seat brackets, side walls, cover trims, and edging profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstery \u0026amp; Manufacturing:\u003c\/strong\u003e Auto upholstery, furniture upholstery, PUR foams, textiles, and neoprene drink coolers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature floor:\u003c\/strong\u003e Do not apply in temperatures below +10°C. Cold temperatures can cause condensed water to form on the wet adhesive layer, preventing a proper bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication risks:\u003c\/strong\u003e Do not apply excessive adhesive, allow the product to pool, or join the substrates too early. Entrapped solvents from wet adhesive pools will result in blistering, a weak bond, or complete joint failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorous materials:\u003c\/strong\u003e For highly open-weave or porous substrates, Adheseal spray contact is recommended instead of brush application to prevent the adhesive from bleeding through to the face of the material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer life:\u003c\/strong\u003e Once the container is opened, the material must be used up in a short time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eAll adhesion surfaces must be clean, dry, and free of oils, grease, dust, and friable material.\u003c\/p\u003e\n\u003cp\u003eApply the adhesive evenly to both surfaces using a suitable roll-coater, tooth-comb, brush, or notched trowel. Avoid forming pools of adhesive in corners or depressions. Wait 3 to 5 minutes until the adhesive is touch-dry, then bring the two materials together with strong, even pressure. Clean up wet or excess adhesive with acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":43822342504640,"sku":"CONTBRUSHCL\/20","price":298.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-ultraclear-contact-adhesive-upholstery-adheseal.jpg?v=1763706687"},{"product_id":"ms-609-fast-grab-adhesive","title":"Xtraseal MS-609 MS Polymer Adhesive","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably to dry and slightly damp substrates alike.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eXtraseal MS-609 functions as both a high-strength structural adhesive and an elastic sealant. Its hybrid MS polymer chemistry delivers high shear and tensile strength without the use of primers on most construction materials. Because it contains no isocyanates or silicones, it will not corrode galvanized or zinc-coated steel, nor will it degrade concrete. The formulation is low-odour, meets \"Green Star\" environmental criteria with a low VOC content of 38 grams per litre, and is compatible with water-based paint systems once cured.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-second immediate grab:\u003c\/strong\u003e Provides instant wet hold, minimising the need for mechanical bracing on vertical installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.1 MPa lap shear strength (ASTM C961):\u003c\/strong\u003e Resists high-stress forces on bonded structural elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200% elongation at break (ASTM D412):\u003c\/strong\u003e Accommodates thermal expansion and mechanical vibration without tearing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 400 kg\/m² wet strength:\u003c\/strong\u003e Sustains heavy initial loads immediately upon application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-40°C to +100°C temperature resistance:\u003c\/strong\u003e Maintains its physical bond and seal properties across extreme environmental service conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eXtraseal MS-609 is suitable for internal and external applications across construction, commercial sign installation, transport, and manufacturing industries. It bonds to the following substrates:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaminated kitchen benches, MDF, chipboard, and wood.\u003c\/li\u003e\n\u003cli\u003eAluminium, galvanized steel, powder-coated metals, and most other metals.\u003c\/li\u003e\n\u003cli\u003eEnamel, glass, porcelain, ceramic, and glazed tiles.\u003c\/li\u003e\n\u003cli\u003ePlaster, stone, and concrete.\u003c\/li\u003e\n\u003cli\u003ePolystyrene, PVC, fibreglass, polyester, and epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use in totally confined spaces:\u003c\/strong\u003e The adhesive requires atmospheric humidity to vulcanise; it will not cure in completely sealed or closed rooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use in aquariums\u003c\/strong\u003e or for structural glazing applications where dedicated glazing silicones like N-80 or N-60 are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid contact with bitumen\u003c\/strong\u003e, tar, EPDM, neoprene, and butyl to prevent plasticiser migration, which causes discolouration and loss of adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid contact with uncured polyurethanes\u003c\/strong\u003e during the curing process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate limitations:\u003c\/strong\u003e May discolour copper and brass. Plastics such as polyacrylate and polycarbonate require a preliminary compatibility test before application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlkyd paints:\u003c\/strong\u003e Drying times of alkyd resin-based paints may increase when applied over this adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure restrictions:\u003c\/strong\u003e Do not expose the bond to thermal, mechanical, or chemical loads before complete vulcanisation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and usage\u003c\/h3\u003e\n\u003cp\u003eApply the adhesive at temperatures between 5°C and 40°C. For optimal performance, use a triangular nozzle to gun beads spaced 5 cm to 10 cm apart. Apply the adhesive with the caulking gun held at a 90-degree angle to stand a triangular bead twice as high as its width.\u003c\/p\u003e\n\u003cp\u003ePress the components together while the adhesive is wet, ensuring a minimum bond line thickness of 2 mm. This minimum thickness is critical to allow the elastic properties of the polymer to function. Although the adhesive provides an instant grab, heavy or highly stressed elements require mechanical support until the adhesive cures.\u003c\/p\u003e\n\u003cp\u003eFor critical high-performance applications, multi-storey facades, or extreme weather exposures, prepare non-porous substrates with Adheseal 50A surface prep (allowing 30 minutes to 2 hours drying time). Prime porous substrates such as concrete, renders, and brick with \u003ca href=\"\/products\/everflex-supaprime\"\u003eEverflex Supaprime\u003c\/a\u003e. Concrete must be cured for at least 28 days before application.\u003c\/p\u003e\n\u003ch3\u003eCure and clean up\u003c\/h3\u003e\n\u003cp\u003eThe adhesive has a skin time of 10 to 30 minutes and cures at a rate of 2 mm per 24 hours at 23°C and 50% relative humidity. Clean up wet spills and tools immediately using white spirits. Cured adhesive cannot be dissolved and must be removed by mechanical scraping or cutting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Single Buy","offer_id":40255200002240,"sku":"MS609\/CTG","price":11.03,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (12)","offer_id":40255200067776,"sku":"MS609\/CTG\/BOX","price":119.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/xtraseal-ms-609-high-grab-adhesive-mirrors-adheseal.png?v=1763709693"}],"url":"https:\/\/adheseal.com.au\/collections\/manufacturing-bond-panels-laminates.oembed","provider":"Adheseal","version":"1.0","type":"link"}