{"title":"Bond the Floor Covering","description":"\u003cp\u003eDirect-stick flooring adhesives for timber, parquetry, engineered boards, wood blocks and vinyl coverings. Select an adhesive that is approved for the floor covering and the prepared substrate.\u003c\/p\u003e","products":[{"product_id":"parquetry-ps1300-hybrid-pu-adhesive","title":"Parquetry PS1300 Flooring Adhesive","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laying parquetry, strip flooring, and wood blocks over concrete or timber substrates, Parquetry PS1300 Flooring Adhesive provides a secure bond that accommodates natural movement. This moisture-curing hybrid adhesive has very low VOC emissions, making it suitable for Greenstar rated projects, and achieves high primerless adhesion to wood, concrete, stone, and glass.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eParquetry PS1300 is formulated as a single-component Hybrid MS Polymer. The pasty consistency allows for uniform notched-trowel application, curing upon exposure to atmospheric moisture to form a tough, flexible bed. With an average open time of 60 minutes at 23°C, it provides a practical working window to lay, align, and hammer timber elements before skinning. It cures at a rate of 3.5mm per 24 hours, establishing a highly stable elastomeric bond with a Shore A hardness of greater than 20 to resist heavy traffic loads without turning brittle.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e60-minute working time:\u003c\/strong\u003e The open window at 23°C and 50% relative humidity to lay timber into the wet adhesive film and check for complete transfer.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e≤ 3% substrate humidity:\u003c\/strong\u003e The maximum allowable moisture level in concrete subflooring (≤ 0.5% for anhydrite screeds) to prevent adhesion failure.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e48-hour cure:\u003c\/strong\u003e The minimum drying window required after installation before the floor can be safely sanded.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e600 to 900 g\/m² coverage:\u003c\/strong\u003e The typical consumption rate (equivalent to 1.2 to 1.6m² per litre) when applying with a 2mm or 3mm notched trowel.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive is designed for bonding specialized timber flooring systems, including:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eSpecial, laminated, varnished, and resin-impregnated parquetry\u003c\/li\u003e\n    \u003cli\u003ePaving wood blocks and standing timber\u003c\/li\u003e\n    \u003cli\u003ePlywood and strip flooring\u003c\/li\u003e\n    \u003cli\u003eExotic species (such as teak and bamboo) installed over cork underlayment\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations and moisture control\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUnderfloor ventilation:\u003c\/strong\u003e Do not apply directly to a platform substrate without an active underfloor ventilation space.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSlab on ground:\u003c\/strong\u003e If applying over a slab on ground, a vapour barrier (such as Primer VBS) is strongly recommended to eliminate the risk of rising damp, cupping, and warping.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTimber moisture limits:\u003c\/strong\u003e The moisture content of the parquetry flooring must be between 7% and 11% at the time of installation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnvironmental boundaries:\u003c\/strong\u003e Do not apply at temperatures below +10°C or when the relative humidity of the room exceeds 65%.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrate flatness:\u003c\/strong\u003e Substrates must be even to a maximum tolerance of 5mm under a 2m ruler. Uneven subfloors require a suitable levelling compound or a minimum 3mm cement underlayment.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eInstallation details\u003c\/h3\u003e\n  \u003cp\u003eThe substrate must be completely clean, dry, and free of dust, grease, and curing compounds. For new 30mm screeds, allow a drying time of at least 4 weeks in summer and 5 to 6 weeks in winter before application. Cut the corner off the foil sachet, spread the adhesive onto the subfloor, and comb with an appropriate spatula or notched trowel. Lay the timber into the wet film, verify proper adhesive transfer to the underside of the wood, and hammer the timber to seat it. Always leave a 10mm to 20mm expansion gap along all walls to allow for structural movement. Wet adhesive must be cleaned from tools immediately using xylene or toluene; cured adhesive can only be removed mechanically.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":46183856865472,"sku":"PARQ\/21","price":270.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/parquetry-ps1300-hybrid-adhesive-concrete-slabs-adheseal.png?v=1763706563"},{"product_id":"xtraseal-ms-608-parquetry-adhesive","title":"X’traseal MS-608 MS Polymer Adhesive","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor laying parquet flooring over subfloors where a permanent balance of high bond strength and acoustic dampening is required, X’traseal MS-608 MS Polymer Adhesive provides a flexible, moisture-resistant bond. Formulated on hybrid silyl modified polyether technology, this odourless adhesive accommodates the natural movement of timber while protecting the installation from subfloor moisture.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eX’traseal MS-608 cures via atmospheric humidity to form a tough, elastic seal with a Shore A hardness of 40. The silyl modified polymer chemistry allows the adhesive to be applied directly to damp surfaces without bubbling or losing adhesion, making it highly reliable in variable site conditions. Because it is free from solvents, isocyanates, acids, and silicone oils, it does not pose the shrinkage or staining risks associated with traditional polyurethane or solvent-based adhesives. It also provides built-in sound dampening properties to reduce footfall noise through the floor assembly.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800% elongation at break:\u003c\/strong\u003e High elasticity (tested to ASTM D412) that allows the cured adhesive to absorb significant timber expansion and contraction without joint failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.90 mPa lap shear strength:\u003c\/strong\u003e High wood-to-wood bond strength (tested to ASTM C961) to keep solid and engineered timber planks flat and securely locked to the subfloor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-minute skin time:\u003c\/strong\u003e Provides a reliable 20 to 30-minute open working window under standard conditions to trowel adhesive and set boards before skinning begins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-40°C to 100°C service temperature:\u003c\/strong\u003e A wide thermal operating range that ensures the bond line remains stable under direct solar heating or in unconditioned spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eSuitable for bonding many types of parquet, solid wood, and engineered timber flooring to almost any common subfloor in both internal and external applications. Specific coverage rates and trowel configurations include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinger Block Parquet:\u003c\/strong\u003e Use a 3 mm x 3 mm x 3 mm square notch trowel for coverage up to 2.0 m²\/L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e≤13 mm Solid or Engineered Wood:\u003c\/strong\u003e Use a 4 mm x 3 mm V-notch trowel (up to 1.4 m²\/L) or a 5 mm x 4 mm V-notch trowel (up to 1.2 m²\/L).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9–13 mm Solid Wood, \u0026gt;13 mm Engineered Wood, or \u0026lt;19 mm Parquet:\u003c\/strong\u003e Use a 6 mm x 6 mm x 3 mm square notch trowel for coverage up to 1.0 m²\/L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt;13 mm Solid Wood and 4’ x 4’ Plywood:\u003c\/strong\u003e Use a 6 mm x 6 mm x 6 mm square notch trowel for coverage up to 0.9 m²\/L.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use on PE, PP, PTFE, bituminous substrates, or plastics containing softeners.\u003c\/li\u003e\n\u003cli\u003eNot suitable for structural glazing or underwater applications.\u003c\/li\u003e\n\u003cli\u003eDo not use in totally confined spaces; atmospheric humidity is required for the adhesive to cure.\u003c\/li\u003e\n\u003cli\u003eNot suitable for heavy trafficable joints, exposure to aggressive solvents\/chemicals, or direct food contact.\u003c\/li\u003e\n\u003cli\u003eWhile paintable with water-based systems, alkyd resin paints may experience extended drying times. Cracking may occur if the paint film cannot match the high movement capability of the adhesive.\u003c\/li\u003e\n\u003cli\u003eWhite variants may show surface yellowing if exposed to strong UV light for prolonged periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and prep\u003c\/h3\u003e\n\u003cp\u003eSubstrates must be clean, dry, and completely free from dirt, oil, grease, detergents, and loose material. Only trowel out as much adhesive as can be worked within 20 to 30 minutes. Slide the timber planks into the wet adhesive bed and tap firmly into place to secure a full bond. Uncured excess adhesive can be cleaned up using mineral spirits or cleaning solvents; cured adhesive must be removed mechanically.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Single Buy","offer_id":38161970069696,"sku":"PARQMS608\/SSG","price":10.9,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (20)","offer_id":38161970102464,"sku":"PARQMS608\/SSG\/BOX","price":196.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/products\/xtraseal-ms-608-damp-subfloor-adhesive-adheseal.png?v=1763709484"},{"product_id":"bostik-ultraset-sf","title":"Bostik Ultraset® SF Polyurethane Flooring Adhesive","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor direct-stick timber flooring installations where boards must remain flat and bonded to concrete slabs without the risk of adhesive re-emulsification from moisture, Bostik Ultraset SF is a solvent-free polyurethane adhesive. It meets the requirements of EN 14293:2006 for bonding parquet to subfloors and is formulated to retain its flexibility after a full cure, accommodating the natural movement of timber flooring systems.\u003c\/p\u003e\n\n \u003ch3\u003eWhat it does\u003c\/h3\u003e\n \u003cp\u003eBostik Ultraset SF provides a continuous elastomeric bond between timber flooring and concrete subfloors or acoustic underlays. Because it is a 100% polyurethane formulation with zero VOCs and no solvents, it does not shrink during curing and will not damage prefinished timber coatings. The adhesive has been tested to ASTM C794 for peel adhesion to Australian hardwood species, ensuring high bond strength across solid strip softwood, hardwood, engineered timber, and bamboo flooring. It is also suitable for use over radiant heating systems and behaves as a dampening layer to improve acoustic properties.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e600% elongation:\u003c\/strong\u003e High flexibility to absorb the expansion and contraction of timber boards without shearing the bond from the subfloor.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.4 N\/mm² shear strength:\u003c\/strong\u003e Tested timber-to-timber under BS EN 14293 to ensure a high-strength, structural bond.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.5 to 2.5 mm per 24 hours cure rate:\u003c\/strong\u003e Cures via atmospheric moisture, achieving a light-traffic walk-on time in 8 to 10 hours and a tack-free state in approximately 4 hours at 23°C and 50% relative humidity.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e80% minimum bond area:\u003c\/strong\u003e The mandatory contact coverage required between the subfloor and the timber to prevent hollow spots and installation failure.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1.1 to 1.3 m² per litre coverage:\u003c\/strong\u003e Average application rate when using standard trowels, varying based on the substrate profile and the selected notch size.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cp\u003eBostik Ultraset SF is suitable for adhering:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eParquet, solid strip softwood and hardwood, engineered timber, and bamboo flooring.\u003c\/li\u003e\n \u003cli\u003eAcoustic underlays to concrete subfloors.\u003c\/li\u003e\n \u003cli\u003eDirect stick flooring over concrete slabs, joists, battens, plywood, timber, and particleboard.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDo not apply over any acrylic primer or sealer.\u003c\/li\u003e\n \u003cli\u003eDo not apply to dense, burnished concrete surfaces without first abrading or sanding the concrete to establish a mechanical key.\u003c\/li\u003e\n \u003cli\u003eDo not apply directly to Bostik PrimeGrip; the adhesive will not bond to it. If PrimeGrip is used, it must be covered entirely with Bostik UL-200.\u003c\/li\u003e\n \u003cli\u003eDo not use in totally confined or air-free spaces, as the product requires atmospheric moisture to cure. Cure times will extend in low humidity (below 40%).\u003c\/li\u003e\n \u003cli\u003eDo not use as a waterproofing membrane. It is not designed to waterproof a subfloor.\u003c\/li\u003e\n \u003cli\u003eDo not install over wet, contaminated, or friable surfaces.\u003c\/li\u003e\n \u003cli\u003eDo not expose the uncured adhesive to water or alcohol-based cleaners.\u003c\/li\u003e\n \u003cli\u003eDo not sand the timber floor until the adhesive has cured for a minimum of 24 hours.\u003c\/li\u003e\n \u003cli\u003eFor bamboo flooring installations, two coats of Bostik Ultraseal Vapour Barrier are recommended due to the high moisture sensitivity of bamboo.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eInstallation and subfloor preparation\u003c\/h3\u003e\n \u003cp\u003eConcrete subfloors must be flat to within 3mm over 3m. Any areas exceeding this tolerance must be levelled using Bostik UL-200 over Bostik PrimeGrip. Concrete slabs should be constructed in accordance with AS2870. For ground floor slabs and new concrete less than four months old, apply Bostik Ultraseal Vapour Barrier to a wet film thickness exceeding 300µm to prevent moisture migration. Concrete subfloors are dry enough for timber installation when the Water Vapour Transmission Rate (WVTR) is under 15g\/m²\/24 hours via the calcium chloride method.\u003c\/p\u003e\n \n \u003cp\u003eApply Bostik Ultraset SF using a single application with an appropriate trowel:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e3mm x 4mm V Notch (1.2 - 1.4 m²\/L):\u003c\/strong\u003e Solid and engineered timber \u0026lt;13mm thick, and parquet \u0026lt;19mm.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e4mm x 5mm V Notch (1.0 - 1.2 m²\/L):\u003c\/strong\u003e Engineered timber \u0026gt;13mm thick, and engineered bamboo \u0026lt;13mm.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5mm x 8mm x 6mm Flat V Notch (Up to 1.2 m²\/L):\u003c\/strong\u003e Engineered timber \u0026lt;13mm and acoustic underlayments.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e3mm x 3mm x 3mm Square Notch (Up to 2.0 m²\/L):\u003c\/strong\u003e Finger block parquet.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e6mm x 6mm x 3mm Square V Notch (Up to 1.0 m²\/L):\u003c\/strong\u003e Engineered timber \u0026gt;13mm, solid wood or bamboo \u0026lt;13mm, and parquet \u0026lt;19mm.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e6mm x 6mm x 6mm Square Notch (Up to 0.9 m²\/L):\u003c\/strong\u003e Solid wood or solid bamboo \u0026lt;13mm, or plywood.\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eTo clean up wet adhesive, use mineral spirits, Shellite, paint thinners, or Bostik Handy Wipes immediately, taking care not to damage prefinished timber coatings.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":42291976372416,"sku":"ULTRASET\/SSG\/BOX","price":310.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/ultraset-sf-solvent-free-adhesive-timber-flooring-adheseal.png?v=1763709937"},{"product_id":"ardex-af-171-15l","title":"Ardex AF 171 Universal Vinyl Adhesive","description":"\u003cdiv role=\"main\"\u003e\n \u003cp\u003eFor resilient and textile floor installations complying with AS 1884, ARDEX AF 171 is an off-white, low-VOC universal flooring adhesive that provides high resistance to plasticiser migration, extended open times, and excellent dimensional stability under vinyl sheet, luxury vinyl tiles, planks, and linoleum.\u003c\/p\u003e\n\n \u003ch3\u003eWhat it does\u003c\/h3\u003e\n \u003cp\u003eARDEX AF 171 secures resilient and textile floorcoverings to prepared internal subfloors with high initial grab and high final bond strength. It accommodates different flooring formats through dual application methods: as a wet-set adhesive to ensure rapid transfer for luxury vinyl planks (LVP) and luxury vinyl tiles (LVT), or as a semi-wet adhesive bed for commercial and residential sheet vinyl.\u003c\/p\u003e\n \u003cp\u003eThe formulation resists plasticiser migration, preventing the bond degradation and dimensional shifting that can occur when plasticisers in vinyl flooring migrate into the adhesive layer over time.\u003c\/p\u003e\n\n \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e15-minute wet-set window:\u003c\/strong\u003e The maximum time available to install luxury vinyl planks and tiles after spreading the adhesive to ensure 100% transfer before skinning.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e40 to 50-minute semi-wet dry time:\u003c\/strong\u003e The set-up window required for sheet vinyl installations, allowing the adhesive to dry partially so trowel notches can be flattened to prevent ridges from telegraphing through thin sheet flooring.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e72-hour cure time:\u003c\/strong\u003e The full drying period required at 20°C to achieve maximum final bond strength.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e1-hour rolling limit:\u003c\/strong\u003e Installed flooring must be rolled in both directions within 60 minutes of placement to guarantee complete crush-out of the adhesive ridges.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n \u003cp\u003eThis adhesive is suitable for securing the following floor coverings to compatible substrates:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eVinyl sheet, luxury vinyl tiles (LVT), luxury vinyl planks (LVP), and linoleum\u003c\/li\u003e\n \u003cli\u003eRubber tiles and sheets up to 4mm thick\u003c\/li\u003e\n \u003cli\u003eAcoustic mats\u003c\/li\u003e\n \u003cli\u003eDirect stick and dual bond carpets\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eCompatible substrates include cementitious underlayments over concrete, hardboard underlay (conforming to AS\/NZS 21854.9), HP MDF (conforming to AS\/NZS 1859.2), plywood underlay grade C (conforming to AS\/NZS 2269.0), fibre cement sheet (conforming to AS\/NZS 2908.2), and plasterboard. Contact ARDEX Technical Services for advice regarding installation over terrazzo, ceramic tiles, and metal substrates.\u003c\/p\u003e\n\n \u003ch3\u003eLimitations\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eWhere rising damp is present or concrete substrate moisture levels exceed 90% RH, consult ARDEX technical bulletin 192 (Smoothing Cement - Moisture Barrier Systems) or ARDEX Technical Services.\u003c\/li\u003e\n \u003cli\u003eA minimum of 3mm of an ARDEX levelling compound must be installed over any applied moisture barrier (such as ARDEX WPM 300 or ARDEX WPM 368) before applying ARDEX AF 171.\u003c\/li\u003e\n \u003cli\u003eSite conditions, including subfloor porosity, temperature, and humidity, will alter the coverage, setup times, and working windows.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eInstallation and moisture preparation\u003c\/h3\u003e\n \u003cp\u003eAll surfaces must be dry, smooth, clean, and absorbent. Ambient and substrate temperatures must be maintained consistently in accordance with AS 1884 and the flooring manufacturer's guidelines for 48 hours before, during, and after installation.\u003c\/p\u003e\n \u003cp\u003eHighly absorbent subfloors must be primed with ARDEX P 51 Primer before adhesive application. For damp or green concrete substrates exceeding 80% relative humidity (ASTM F2170) or 15g\/m²\/24hrs (ASTM F1869) but below 90% RH, prepare the subfloor using one of the following moisture stop options before applying the required 3mm levelling underlayment:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eOption 1:\u003c\/strong\u003e A single coat of ARDEX WPM 300 applied at 3m²\/litre, blinded with broadcast ARDEX Primer Sand while wet, cured overnight, and swept clean of excess sand.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOption 2:\u003c\/strong\u003e A single coat of ARDEX WPM 368 applied at 3m²\/litre, which allows direct application of the ARDEX levelling compound without an additional primer once cured.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eCoverage guide\u003c\/h3\u003e\n \u003cp\u003eCoverage rates depend on substrate porosity and texture. Trowel selection should be site-verified to ensure adequate adhesive transfer:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eResidential sheet vinyl:\u003c\/strong\u003e Up to 5m²\/litre using a U1 trowel.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCommercial sheet vinyl:\u003c\/strong\u003e Up to 5m²\/litre using a V1 trowel.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSmooth back rubber:\u003c\/strong\u003e Up to 5m²\/litre using a V1 trowel.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTextured back rubber:\u003c\/strong\u003e Up to 2.5m²\/litre using a V2 trowel.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLinoleum:\u003c\/strong\u003e Up to 2.5m²\/litre using a V2 trowel.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDirect stick carpet:\u003c\/strong\u003e Up to 0.8m² to 5m²\/litre using a V1 to V3 trowel.\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":47070584930496,"sku":"ARDAF171\/15","price":180.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/ardex-af171-universal-vinyl-adhesive-adheseal.png?v=1778907099"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/collections\/parquetry-ps1300-hybrid-adhesive-concrete-slabs-adheseal.png?v=1785994449","url":"https:\/\/adheseal.com.au\/collections\/flooring-lay-timber-parquetry.oembed","provider":"Adheseal","version":"1.0","type":"link"}