{"title":"Panel \u0026 Trim Adhesives","description":"\u003cp\u003eContact adhesives for caravan and truck body interiors: panels, foam, textiles, rubber, trim and edging. Brush, spray and clear grades, plus a high-grab adhesive for structural bonds that must hold without clamps.\u003c\/p\u003e","products":[{"product_id":"adheseal-high-power-609-instant-grab-adhesive","title":"Adheseal High Power 609 Instant Grab Adhesive","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor high-load installations, vertical panels, and joints subject to constant vibration or movement, High Power 609 Instant Grab Adhesive provides a 1-second immediate grab that reduces the need for temporary mechanical supports. This single-part MS hybrid polymer cures via atmospheric moisture, forming an elastic bond that adheres to damp construction surfaces and common building substrates without corroding concrete or galvanised metals.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eHigh Power 609 combines a rapid initial wet grab with high elastic recovery. By curing into a flexible elastomer, it absorbs mechanical shock, thermal expansion, and structural vibrations in transport, marine, and construction assemblies. The formulation is free of isocyanates and silicones, allowing it to be painted over with water-based coatings once cured. It maintains a stable, non-sagging profile during application and resists prolonged weather and UV exposure in both internal and external environments.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-second immediate grab:\u003c\/strong\u003e Eliminates or minimises temporary bracing for vertical cladding, signs, and panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet strength up to 400kg\/m²:\u003c\/strong\u003e Provides high initial holding power across the wet adhesive contact area before full cure begins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break of 200%:\u003c\/strong\u003e High elasticity (tested to ASTM D412) to accommodate joint movement and structural settling without tearing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLap shear strength of 1.1 MPa:\u003c\/strong\u003e Delivers high-end structural bond strength (tested to ASTM C961) on cured assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure rate of 2mm per 24 hours:\u003c\/strong\u003e Cures reliably at 23°C and 50% relative humidity, with an initial skin time of 10 to 30 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eThis adhesive bonds a wide selection of materials across the building, sign, transport, and marine industries, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaminated surfaces:\u003c\/strong\u003e Laminated kitchen benches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetals and finishes:\u003c\/strong\u003e Aluminium, galvanised steel, powder coats, enamel, and most common metals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid materials:\u003c\/strong\u003e Glass, porcelain, ceramic tiles, stone, and plaster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber and composites:\u003c\/strong\u003e Wood, MDF, chipboard, and plywood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlastics and synthetics:\u003c\/strong\u003e PVC, polystyrene, polyester, fibreglass, and epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure restrictions:\u003c\/strong\u003e Do not use in totally confined spaces or closed rooms; the formulation requires atmospheric humidity to cure. Do not expose the adhesive to thermal, mechanical, or chemical loads before complete vulcanisation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncompatible applications:\u003c\/strong\u003e Not suitable for aquariums or structural glazing (use N-80 or N-60 Glazing silicone instead).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate reactions:\u003c\/strong\u003e May discolour copper and brass. Avoid contact with bitumen, tar, or plasticiser-releasing materials such as EPDM, neoprene, and butyl, as this can cause discolouration and loss of adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating compatibility:\u003c\/strong\u003e Avoid contact with uncured polyurethanes during the curing window. Water-based paints are compatible, but alkyd resin-based paints may experience increased drying times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent sensitivity:\u003c\/strong\u003e Do not clean or treat the joint with solvents or chemical cleaning agents during the curing process, as this can affect performance and colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003cp\u003eAll surfaces must be structurally sound, clean, and free of dust, grease, curing compounds, or standing surface water. Concrete must cure for a minimum of 28 days before application.\u003c\/p\u003e\n\u003cp\u003eFor non-porous substrates such as aluminium, waterproof membranes, stainless steel, and glazed tiles, slightly roughen the surface with a fine abrasive pad. Clean and pre-treat the joint with Adheseal 50A surface prep using a clean cloth, allowing between 30 minutes and 2 hours drying time before applying the adhesive. For porous surfaces like concrete, mortar, and brick, prime the joint using \u003ca href=\"\/products\/everflex-supaprime\"\u003eEverflex Supaprime\u003c\/a\u003e applied by brush, adhering to the same 30-minute to 2-hour window.\u003c\/p\u003e\n\u003cp\u003eApply the adhesive at temperatures between 5°C and 40°C using a manual, pneumatic, or cordless caulking gun. Cut the triangular nozzle to ensure the dispensed bead stands twice as high as its width (in a triangular profile). Apply parallel beads spaced 5cm to 10cm apart, depending on the weight of the panel. Press the components together while the adhesive is still wet, ensuring a minimum wet adhesive thickness of 2mm is maintained to allow the elastic properties to function correctly. Clean wet tools and spills immediately with white spirit; cured adhesive must be removed mechanically.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Single Buy","offer_id":39423167201472,"sku":"HIPOWERM\/SSG","price":15.7,"currency_code":"AUD","in_stock":true},{"title":"Box Buy (20)","offer_id":39423167234240,"sku":"HIPOWERM\/SSG\/BOX","price":282.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/hi-power-609-fast-grab-adhesive-panels-cladding-adheseal.png?v=1763706281"},{"product_id":"sp-230-spray-contact-adhesive-everbond","title":"Everbond Spray Contact SP-230","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces, such as cover trims and edging profiles.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond Spray Contact SP-230 functions through contact bonding, requiring application to both mating surfaces. Once applied, the volatile solvents evaporate quickly during a short flash-off window. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, high-strength bond that resists both heat and water. The formulation is also resistant to ageing, preserving bond integrity over time in demanding environments like vehicle cabins and furniture upholstery.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e A short flash-off window that speeds up assembly and fabrication sequences.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6 to 8m² per litre consumption:\u003c\/strong\u003e Provides a predictable coverage rate for estimating material requirements across large surfaces.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application range:\u003c\/strong\u003e The allowable temperature window for applying the adhesive without compromising bond development.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive bonds a broad range of materials and is suitable for:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Timber, MDF, particleboard, rubber sheets, plastic laminates, leather, fabric, cloth-backed and polyester-backed vinyl, concrete, glass, and metal sheets.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransport vehicle assembly:\u003c\/strong\u003e Room temperature contact bonding of PUR foams and textiles to adjacent steps, wheel arches, seat brackets, and side walls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpholstery:\u003c\/strong\u003e Automotive and furniture upholstery applications, especially where high spring-back forces are present.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDo not apply in temperatures below +10°C; condensed water can form on the adhesive film and prevent a proper bond. For optimal performance, apply when the atmosphere, material, and adhesive are all at +20°C.\u003c\/li\u003e\n    \u003cli\u003eDo not apply excessive adhesive, allow it to pool, or join the substrates too early. Entrapped solvents will weaken the bond or cause blistering and complete bond failure.\u003c\/li\u003e\n    \u003cli\u003eAdhesion and compatibility must be verified by testing actual substrates and conditions prior to full-scale application.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003cp\u003eSurfaces must be clean, dry, and free of oils, grease, and loose or friable materials. Apply Everbond Spray Contact SP-230 evenly to both surfaces using a suitable spray gun, rollcoater, tooth-comb, or brush. For porous or open-weave materials, spray application is recommended to prevent the adhesive from bleeding through the face of the substrate.\u003c\/p\u003e\n  \u003cp\u003eWait 3 to 5 minutes until the adhesive is touch-dry before bringing the materials together with strong, even pressure. Once the container is opened, the material must be used within a short timeframe. Clean up wet adhesive tools and residue with acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Natural \/ 20L","offer_id":37551471722688,"sku":"CONTSP230N\/20","price":196.61,"currency_code":"AUD","in_stock":true},{"title":"Natural \/ 200L","offer_id":47039413387456,"sku":"CONTSP230N\/200","price":1761.05,"currency_code":"AUD","in_stock":true},{"title":"Red \/ 20L","offer_id":46349645971648,"sku":"CONTSP230R\/20","price":183.65,"currency_code":"AUD","in_stock":true},{"title":"Red \/ 200L","offer_id":47039413420224,"sku":"CONTSP230R\/200","price":1789.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-sp-230-spray-adhesive-foam-laminate-adheseal.jpg?v=1763706563"},{"product_id":"brush-contact-adhesive-everbond","title":"Everbond Brush Contact Adhesive","description":"\u003cdiv role=\"main\"\u003e\n  \u003cp\u003eFor laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims and edging profiles, without slipping.\u003c\/p\u003e\n\n  \u003ch3\u003eHow it works\u003c\/h3\u003e\n  \u003cp\u003eEverbond Brush Contact Adhesive is a one-component, yellow liquid that is applied to both mating surfaces. It features a very short flash-off time, drying in approximately 3 to 5 minutes under normal conditions. Bringing the two touch-dry surfaces together under strong, even pressure creates an immediate, aging-resistant bond. When used with the 2P additive, this adhesive system is capable of withstanding temperatures exceeding 120°C without bond failure, making it highly stable for automotive upholstery, transport vehicle production, and furniture upholstery applications.\u003c\/p\u003e\n\n  \u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e6 to 8 m² per Litre coverage:\u003c\/strong\u003e Provides clear material planning and consumption tracking for fabrication runs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e Extremely fast flash-off window speeds up assembly line pacing and manual fabrication.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application temperature:\u003c\/strong\u003e Safe operational range, with optimal bonding performance achieved when the atmosphere, substrate, and adhesive are all at +20°C.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhere to use it\u003c\/h3\u003e\n  \u003cp\u003eThis adhesive bonds a broad range of materials and is suitable for:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Timber, MDF, particleboard, plastic laminates, rubber sheets, leather, fabric, cloth-backed vinyl, polyester-backed vinyl, concrete, glass, and metal sheets.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTransport vehicles:\u003c\/strong\u003e Room-temperature contact bonding of interior coverings (such as PUR foams and textiles) to adjoining steps, wheel arches, seat brackets, and side walls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpholstery:\u003c\/strong\u003e Automotive trim installations, furniture upholstery, and edge profile bonding where high spring-back forces occur.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eLimitations\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature floor:\u003c\/strong\u003e Do not apply in temperatures below +10°C. Temperatures below this threshold can cause condensed water to form on the wet adhesive, preventing a successful bond.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSolvent entrapment:\u003c\/strong\u003e Do not apply excessive adhesive, allow it to pool, or join the substrates too early. Entrapped solvents will weaken the bond and cause surface blistering.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOpen weave or porous materials:\u003c\/strong\u003e Everbond Brush Contact Adhesive may bleed through open-weave or porous substrates; Adheseal spray contact adhesive is recommended for these materials instead.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eContainer management:\u003c\/strong\u003e Once the container is opened, the material must be used up in a short time.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eApplication\u003c\/h3\u003e\n  \u003cp\u003eEnsure all adhesion surfaces are clean, dry, and free of oils, fats, and loose or friable materials. Apply the adhesive evenly to both surfaces using a suitable rollcoater, tooth-comb, brush, or notched trowel. Avoid any pooling. Allow the adhesive to dry until it is touch dry (typically 3 to 5 minutes depending on local humidity and temperature), then join the components together using strong, even pressure. Clean up wet or excess adhesive using Acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"20L","offer_id":37551471853760,"sku":"CONTBRUSH\/20","price":266.18,"currency_code":"AUD","in_stock":true},{"title":"4L","offer_id":46349645906112,"sku":"CONTBRUSH\/4","price":81.85,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-brush-contact-adhesive-foams-adheseal.jpg?v=1763706563"},{"product_id":"ultra-clear-brush-contact-adhesive-everbond","title":"Everbond Ultra Clear Brush Contact","description":"\u003cdiv role=\"main\"\u003e\n\u003cp\u003eFor automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for secure assembly even when working with trim materials with high spring-back forces.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eEverbond Ultra Clear Brush Contact functions via rapid solvent evaporation. Applied evenly to both mating surfaces, the thixotropic liquid flashes off in approximately 3 to 5 minutes to form a tacky film. When the two surfaces are pressed together under strong pressure, they form an instant, high-strength bond. Because it dries clear, it prevents unsightly joint lines on exposed seams, such as those on neoprene drink coolers, PUR foams, and fine upholstery fabrics.\u003c\/p\u003e\n\u003ch3\u003eNumbers that matter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 to 8 m² per litre consumption:\u003c\/strong\u003e Provides a predictable coverage floor for estimating material requirements across flat substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 to 5 minutes dry time:\u003c\/strong\u003e Extremely fast open-time window before bonding, keeping assembly lines and upholstery workshops moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10°C to 35°C application range:\u003c\/strong\u003e The safe temperature envelope for applying the adhesive to prevent pre-cure or condensation-related failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120°C heat resistance:\u003c\/strong\u003e Tested to withstand temperatures in excess of 120°C when used with the 2P additive, protecting the bond against high-heat cabin environments in transport vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eThis adhesive bonds a broad range of materials, particularly in the manufacturing of transport vehicles and commercial upholstery. Suitable substrates and applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Timber, MDF, particleboard, rubber sheets, plastic laminates, leather, glass, metal sheets, fabric, and both cloth-backed and polyester-backed vinyl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Assembly:\u003c\/strong\u003e Adjoining steps, wheel arches, seat brackets, side walls, cover trims, and edging profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstery \u0026amp; Manufacturing:\u003c\/strong\u003e Auto upholstery, furniture upholstery, PUR foams, textiles, and neoprene drink coolers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature floor:\u003c\/strong\u003e Do not apply in temperatures below +10°C. Cold temperatures can cause condensed water to form on the wet adhesive layer, preventing a proper bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication risks:\u003c\/strong\u003e Do not apply excessive adhesive, allow the product to pool, or join the substrates too early. Entrapped solvents from wet adhesive pools will result in blistering, a weak bond, or complete joint failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorous materials:\u003c\/strong\u003e For highly open-weave or porous substrates, Adheseal spray contact is recommended instead of brush application to prevent the adhesive from bleeding through to the face of the material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer life:\u003c\/strong\u003e Once the container is opened, the material must be used up in a short time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eAll adhesion surfaces must be clean, dry, and free of oils, grease, dust, and friable material.\u003c\/p\u003e\n\u003cp\u003eApply the adhesive evenly to both surfaces using a suitable roll-coater, tooth-comb, brush, or notched trowel. Avoid forming pools of adhesive in corners or depressions. Wait 3 to 5 minutes until the adhesive is touch-dry, then bring the two materials together with strong, even pressure. Clean up wet or excess adhesive with acetone.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Adheseal","offers":[{"title":"Default Title","offer_id":43822342504640,"sku":"CONTBRUSHCL\/20","price":298.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/3630\/0224\/files\/everbond-ultraclear-contact-adhesive-upholstery-adheseal.jpg?v=1763706687"}],"url":"https:\/\/adheseal.com.au\/collections\/caravan-and-truck-bond-panels-interiors.oembed","provider":"Adheseal","version":"1.0","type":"link"}